Analytical Modeling of the Interface between Lightly Roughened Hollowcore Slabs and Cast-In-Place Concrete Topping
View/ Open
Date
2015Author
Aiham Adawi
Maged A. Youssef
Mohamed Meshaly
Metadata
Show full item recordAbstract
Hollowcore slabs are commonly used in different types of structures. They usually include a 50-mm concrete topping. Structural engineers can use this topping to increase the slab load-carrying capacity. North American design standards relate the horizontal shear strength at the interface between hollowcore slabs and the concrete topping to the slab surface roughness. This paper presents the results of four push-off tests on hollowcore slabs supplied by two manufacturers and roughened using a conventional steel broom. The tested slabs sustained higher horizontal shear stresses than those specified by the design standards. Utilizing the data from the push-off tests, an analytical model was applied to evaluate the shear and peel stiffnesses,