Show simple item record

dc.contributor.authorAmir Mofidi
dc.contributor.authorOmar Chaallal
dc.contributor.authorBrahim Benmokrane
dc.contributor.authorKenneth Neale
dc.date.accessioned2017-05-08T21:36:29Z
dc.date.available2017-05-08T21:36:29Z
dc.date.copyrightJune 2012
dc.date.issued2012
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000266.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57394
dc.description.abstractThis paper presents the results of an experimental investigation on the performance of full-scale reinforced concrete (RC) T-girders strengthened in shear using externally bonded (EB) fiber-reinforced polymer (FRP) U-jackets end-anchored with different systems. Debonding of FRP, particularly in shear, is a major failure mode when using FRP sheets to strengthen concrete structures. Design code provisions and guidelines related to shear-strengthening of RC beams using externally bonded FRP (EB FRP) suggest the use of end-anchorage systems to prevent FRP debonding. However, no guidelines are available for the design and effectiveness of end-anchorage systems. The main objective of this study is to evaluate the effectiveness of different end-anchorage systems for RC beams strengthened using EB FRP methods. To this end, nine tests were performed on 4520-mm-long RC T-beams. Four specimens were strengthened in shear using EB FRP methods with various end-anchorage systems, and their performance was compared with similar specimens strengthened with: (1) EB FRP with no anchorage; (2) near-surface-mounted (NSM) FRP rods; and (3) embedded through-section (ETS) FRP rods. The results of this study reveal that specimens retrofitted with EB FRP methods and properly designed end-anchorage systems can achieve a superior contribution to shear resistance compared with specimens strengthened using EB FRP with no anchorage, NSM, or ETS methods.
dc.publisherAmerican Society of Civil Engineers
dc.titlePerformance of End-Anchorage Systems for RC Beams Strengthened in Shear with Epoxy-Bonded FRP
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000263
dc.treeJournal of Composites for Construction:;2012:;Volume ( 016 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record