Performance of End-Anchorage Systems for RC Beams Strengthened in Shear with Epoxy-Bonded FRP
Date
2012Author
Amir Mofidi
Omar Chaallal
Brahim Benmokrane
Kenneth Neale
Metadata
Show full item recordAbstract
This paper presents the results of an experimental investigation on the performance of full-scale reinforced concrete (RC) T-girders strengthened in shear using externally bonded (EB) fiber-reinforced polymer (FRP) U-jackets end-anchored with different systems. Debonding of FRP, particularly in shear, is a major failure mode when using FRP sheets to strengthen concrete structures. Design code provisions and guidelines related to shear-strengthening of RC beams using externally bonded FRP (EB FRP) suggest the use of end-anchorage systems to prevent FRP debonding. However, no guidelines are available for the design and effectiveness of end-anchorage systems. The main objective of this study is to evaluate the effectiveness of different end-anchorage systems for RC beams strengthened using EB FRP methods. To this end, nine tests were performed on 4520-mm-long RC T-beams. Four specimens were strengthened in shear using EB FRP methods with various end-anchorage systems, and their performance was compared with similar specimens strengthened with: (1) EB FRP with no anchorage; (2) near-surface-mounted (NSM) FRP rods; and (3) embedded through-section (ETS) FRP rods. The results of this study reveal that specimens retrofitted with EB FRP methods and properly designed end-anchorage systems can achieve a superior contribution to shear resistance compared with specimens strengthened using EB FRP with no anchorage, NSM, or ETS methods.