Show simple item record

dc.contributor.authorChristoph Czaderski
dc.contributor.authorKhaled Soudki
dc.contributor.authorMasoud Motavalli
dc.date.accessioned2017-05-08T21:36:10Z
dc.date.available2017-05-08T21:36:10Z
dc.date.copyrightAugust 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000109.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57222
dc.description.abstractUnderstanding the transfer of force by bond between externally bonded fiber-reinforced polymer (FRP) reinforcement and concrete is an important step in formulating good models for predicting debonding failures observed in externally bonded reinforcement strengthened systems. In this paper, a 3D optical displacement measurement system was used to capture the full-field displacements from the front and side view in pull-off bond specimens. The experiments were carried using six specimens with carbon FRP (CFRP) strips having different axial stiffnesses but a constant bond length to the concrete substrate. Using the optical measurements, it was possible to obtain the in-plane displacement or slip and the out-of-plane displacement or separation between the CFRP strip and the concrete. It was demonstrated, that the usual assumption of pure shear stresses in such pull-off tests is not true and that the bond behavior is a two-dimensional problem involving shear and peeling stresses. The bond behavior in CFRP strip to concrete pull-off tests was characterized by three stages: (1) the initiation of the first crack; (2) the initiation of debonding; and (3) failure by complete debonding. Based on the test results it was found that there was a dependency between the maximum bond shear stress, the maximum fracture energy of the FRP-concrete interface, and the stiffness of the FRP. However, the slip values after initiation of debonding (Stage 2) were independent of the FRP stiffness. The measured anchorage force and anchorage length were in good agreement with predictions from existing code equations.
dc.publisherAmerican Society of Civil Engineers
dc.titleFront and Side View Image Correlation Measurements on FRP to Concrete Pull-Off Bond Tests
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000106
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record