Attenuation of Inlet Distortion Effects on Fans Using Asymmetric Inlet Guide Vanes

Abstract

This research proposes and preliminarily analyzes a novel concept to passively reduce the negative impact of deep inlet distortion on the fan of an aero-engine. It consists of placing a row of non-axisymmetric inlet guide vanes (IGVs) just upstream of the fan rotor to induce a spatially varying swirl distribution. The swirl distribution is tailored so as to reduce flow incidence in the distorted flow region and increase it in the undistorted flow region to decrease the fluctuation in aerodynamic force on the fan blades under large inlet distortion that can lead to blade failure, as well as attenuate the negative effect of flow non-uniformity on fan/engine aerodynamic performance. A computational study is carried out on a high-speed (transonic) fan rotor (NASA Rotor 67) from a published distortion study using full-annulus unsteady 3D computational fluid dynamics (CFD) simulations. The asymmetric IGV is designed through a process of manual iterations and CFD simulations to take into account the change in flow redistribution with IGV geometry. The asymmetric IGV design, though not optimized, reduces the aerodynamic force variation amplitude by around two-thirds. Moreover, it allows the fan to recover over half of the loss in total pressure rise due to inlet distortion. The asymmetric IGV is also able to reduce the total pressure distortion at the fan rotor exit. Spanwise analysis indicates that the effectiveness of the asymmetric IGV can be improved on all three metrics if better 3D IGV shaping is performed.