• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Experimental Investigation on the Deformation and Noncoaxial Characteristics of Fiber-Reinforced Aeolian Soil under Traffic Load

    Thumbnail
    View/Open
    (ASCE)GM.1943-5622.0002364.pdf (2.798Mb)
    Date
    2022-5-1
    Author
    Jiashun Liu
    Kaixin Zhu
    Yang Shen
    Yu Ren
    Jianping Zuo
    Xuefeng Zhang
    Metadata
    Show full item record
    Abstract
    The cumulative plastic deformation of a foundation associated with traffic loading causes subgrade instability, and eventually, failure of retaining structures. In the present study, hollow torsional shear tests were conducted on fiber-reinforced aeolian soil involving varying fiber contents, cyclic deviator stresses, cyclic shear stresses, and consolidation confining pressures using the Small-Strain Hollow Cylinder Apparatus, developed by GDS Instruments Ltd. (GDS SS-HCA). This enabled an investigation of the deformation characteristics and noncoaxial angle changes of fiber-reinforced aeolian soil under a heart-shaped stress path. The results indicate that fiber-reinforced soil deformation under cyclic loading involves axial (ɛz), radial (ɛr), circumferential (ɛθ), and shear (γzθ) strains, and deformation increases with increasing the cyclic number. The strain increases rapidly during the first 200 cycles and then gradually. The axial deformation decreases with increasing fiber content when the fiber content is less than 2‰ and increases when the content is more than 2‰. The plastic strain and total deformation decrease with increasing confining pressure but increase as the cyclic dynamic stress and cyclic shear stress amplitudes increase. Functional equations of the cumulative axial plastic strain and vibration numbers are proposed. The relationships between the model parameters, including the fiber content and cyclic torsional shear stress, are analyzed. The principal stress axis rotation causes variations between the major principal strain increment and the principal stress directions, representing the noncoaxial angle (β). The noncoaxial angle fluctuates during each loading cycle, exhibiting a V shape, for principal stress axis angles (ασ) from −90° to −45° and −45° to 30°, and decreasing at angles varying from 30° to 90°, with a maximum noncoaxial angle of approximately 30° per cycle.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4283499
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV