Experimental Investigation on the Deformation and Noncoaxial Characteristics of Fiber-Reinforced Aeolian Soil under Traffic LoadSource: International Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 005::page 04022054DOI: 10.1061/(ASCE)GM.1943-5622.0002364Publisher: ASCE
Abstract: The cumulative plastic deformation of a foundation associated with traffic loading causes subgrade instability, and eventually, failure of retaining structures. In the present study, hollow torsional shear tests were conducted on fiber-reinforced aeolian soil involving varying fiber contents, cyclic deviator stresses, cyclic shear stresses, and consolidation confining pressures using the Small-Strain Hollow Cylinder Apparatus, developed by GDS Instruments Ltd. (GDS SS-HCA). This enabled an investigation of the deformation characteristics and noncoaxial angle changes of fiber-reinforced aeolian soil under a heart-shaped stress path. The results indicate that fiber-reinforced soil deformation under cyclic loading involves axial (ɛz), radial (ɛr), circumferential (ɛθ), and shear (γzθ) strains, and deformation increases with increasing the cyclic number. The strain increases rapidly during the first 200 cycles and then gradually. The axial deformation decreases with increasing fiber content when the fiber content is less than 2‰ and increases when the content is more than 2‰. The plastic strain and total deformation decrease with increasing confining pressure but increase as the cyclic dynamic stress and cyclic shear stress amplitudes increase. Functional equations of the cumulative axial plastic strain and vibration numbers are proposed. The relationships between the model parameters, including the fiber content and cyclic torsional shear stress, are analyzed. The principal stress axis rotation causes variations between the major principal strain increment and the principal stress directions, representing the noncoaxial angle (β). The noncoaxial angle fluctuates during each loading cycle, exhibiting a V shape, for principal stress axis angles (ασ) from −90° to −45° and −45° to 30°, and decreasing at angles varying from 30° to 90°, with a maximum noncoaxial angle of approximately 30° per cycle.
|
Collections
Show full item record
contributor author | Jiashun Liu | |
contributor author | Kaixin Zhu | |
contributor author | Yang Shen | |
contributor author | Yu Ren | |
contributor author | Jianping Zuo | |
contributor author | Xuefeng Zhang | |
date accessioned | 2022-05-07T21:15:07Z | |
date available | 2022-05-07T21:15:07Z | |
date issued | 2022-5-1 | |
identifier other | (ASCE)GM.1943-5622.0002364.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4283499 | |
description abstract | The cumulative plastic deformation of a foundation associated with traffic loading causes subgrade instability, and eventually, failure of retaining structures. In the present study, hollow torsional shear tests were conducted on fiber-reinforced aeolian soil involving varying fiber contents, cyclic deviator stresses, cyclic shear stresses, and consolidation confining pressures using the Small-Strain Hollow Cylinder Apparatus, developed by GDS Instruments Ltd. (GDS SS-HCA). This enabled an investigation of the deformation characteristics and noncoaxial angle changes of fiber-reinforced aeolian soil under a heart-shaped stress path. The results indicate that fiber-reinforced soil deformation under cyclic loading involves axial (ɛz), radial (ɛr), circumferential (ɛθ), and shear (γzθ) strains, and deformation increases with increasing the cyclic number. The strain increases rapidly during the first 200 cycles and then gradually. The axial deformation decreases with increasing fiber content when the fiber content is less than 2‰ and increases when the content is more than 2‰. The plastic strain and total deformation decrease with increasing confining pressure but increase as the cyclic dynamic stress and cyclic shear stress amplitudes increase. Functional equations of the cumulative axial plastic strain and vibration numbers are proposed. The relationships between the model parameters, including the fiber content and cyclic torsional shear stress, are analyzed. The principal stress axis rotation causes variations between the major principal strain increment and the principal stress directions, representing the noncoaxial angle (β). The noncoaxial angle fluctuates during each loading cycle, exhibiting a V shape, for principal stress axis angles (ασ) from −90° to −45° and −45° to 30°, and decreasing at angles varying from 30° to 90°, with a maximum noncoaxial angle of approximately 30° per cycle. | |
publisher | ASCE | |
title | Experimental Investigation on the Deformation and Noncoaxial Characteristics of Fiber-Reinforced Aeolian Soil under Traffic Load | |
type | Journal Paper | |
journal volume | 22 | |
journal issue | 5 | |
journal title | International Journal of Geomechanics | |
identifier doi | 10.1061/(ASCE)GM.1943-5622.0002364 | |
journal fristpage | 04022054 | |
journal lastpage | 04022054-12 | |
page | 12 | |
tree | International Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 005 | |
contenttype | Fulltext |