Show simple item record

dc.contributor.authorJohn W. van de Lindt
dc.contributor.authorM. Omar Amini
dc.contributor.authorDouglas Rammer
dc.contributor.authorPhilip Line
dc.contributor.authorShiling Pei
dc.contributor.authorMarjan Popovski
dc.date.accessioned2022-01-30T21:04:57Z
dc.date.available2022-01-30T21:04:57Z
dc.date.issued9/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002718.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267624
dc.description.abstractSeismic force resisting systems based on cross-laminated timber (CLT) shear walls have garnered considerable attention for in mid-rise construction around the world. The purpose of this study was to determine seismic performance factors for CLT shear wall systems in platform type construction. These factors, namely, the response modification factors, R, overstrength factor, Ωo and deflection amplification factor, Cd, have been developed in this study for CLT walls and proposed for inclusion in ASCE 7. The study follows the FEMA P695 methodology that incorporates testing, evaluating a design methodology, defining the design space representative of typical construction, and comprehensive performance evaluation. The testing phase of the project consisted of connector testing and CLT shear wall testing, all with nonproprietary generic connectors to facilitate building code recognition. The design methodology and archetype development process are also discussed in this paper. A total of nine index buildings were developed from which 72 archetypes were extracted for this study. The archetypes were designed based on the design methodology and assessed with nonlinear pushover analysis and incremental dynamic analysis. Based on the required collapse margin, an R factor of 3 is proposed for CLT shear wall systems with 2∶1 or mixed aspect ratio panels up to 4∶1, and an R factor of 4 is proposed for CLT shear wall systems made up of only 4∶1 aspect ratio panels.
dc.publisherASCE
dc.titleSeismic Performance Factors for Cross-Laminated Timber Shear Wall Systems in the United States
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002718
dc.page16
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record