• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    A Simplified Thermal Model and Comparison Analysis for a Stratospheric Lighter-Than-Air Vehicle

    Thumbnail
    View/Open
    ht_140_02_022801.pdf (3.547Mb)
    Date
    2018
    Author
    Zheng, Wei
    Zhang, Xiangyi
    Ma, Rong
    Li, Yong
    Metadata
    Show full item record
    Abstract
    Transient thermal behavior modeling and simulation is a key issue in predicting flight performance of stratospheric lighter-than-air (LTA) vehicles, such as airships or balloons. To reduce computational load of the transient thermal model without significant loss of accuracy, first this paper adopted an analytical model of view factor from the element surfaces to the Earth and constructed a full distributed parameter transient thermal model. Then, the full model was validated by comparing the predictions obtained from the full model with the flight experimental data. The comparison results show that the divergence of the predicted average internal gas temperatures from the flight data is about 0.4%, and the divergence of the predicted envelop temperatures from the flight data is less than 2.4%. Furthermore, considering that the effect of the net radiation heat transfer among the inner surface enclosure on average internal gas temperature is far less than radiation heat transfer of the outer surfaces, the full model was simplified by omitting radiant heat exchange within the inner surface enclosure. The accuracy of the simplified model was investigated by comparing the predictions of average internal gas temperature and skin temperature distribution between the simplified model and full model under various conditions, such as flight time, altitude, and different external skin thermal properties. The comparison results indicate that the simplified model agrees well with the full model. The discrepancies of the predicted average internal gas temperature between the two models are less than 0.3% under most conditions, and the discrepancies of the predicted temperature distribution between the two models are also acceptable when the LTA vehicle, especially with low absorptivity/emissivity ratio coatings, operates at about 20 km altitude.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4251901
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV