Show simple item record

dc.contributor.authorValentín, Francisco I.
dc.contributor.authorArtoun, Narbeh
dc.contributor.authorKawaji, Masahiro
dc.contributor.authorMcEligot, Donald M.
dc.date.accessioned2019-02-28T11:01:36Z
dc.date.available2019-02-28T11:01:36Z
dc.date.copyright10/8/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_12_122502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251859
dc.description.abstractHigh pressure/high temperature forced and mixed convection experiments have been performed with helium and nitrogen at temperatures and pressures up to 893 K and 64 bar, respectively. The test section had a 16.8 mm ID flow channel in a 108 mm OD graphite column. Flow regimes included turbulent, transitional, and laminar flows with the inlet Reynolds numbers ranging from 1500 to 15,000. Due to strong heating, the local Reynolds number decreased by up to 50% over the 2.7 m test section. In addition, heat transfer degradation and flow laminarization caused by intense heating led to Nusselt numbers 20–50% lower than the values given by the modified Dittus–Boelter and modified Gnielinski correlations. Flow laminarization criteria were considered based on a dimensionless acceleration parameter (Kv) and buoyancy parameter (Bo*). Upward turbulent flows displayed higher wall temperatures than downward flows, due to the impact of flow laminarization which is not expected to affect buoyancy-opposed flows. Laminar Reynolds number flows presented an opposite behavior due to the enhancement of heat transfer for buoyancy-aided flows. At low Reynolds numbers, downward flows displayed higher and lower wall temperatures in the upstream and downstream regions, respectively, than the upward flow cases. In the entrance region of downward flows, convection heat transfer was reduced due to buoyancy leading to higher wall temperatures, while in the downstream region, buoyancy-induced mixing caused higher convection heat transfer and lower wall temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleForced and Mixed Convection Heat Transfer at High Pressure and High Temperature in a Graphite Flow Channel
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4039585
dc.journal.fristpage122502
dc.journal.lastpage122502-10
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record