| dc.contributor.author | Motoi Yasumura | |
| dc.contributor.author | Kenji Kobayashi | |
| dc.contributor.author | Minoru Okabe | |
| dc.contributor.author | Tatsuya Miyake | |
| dc.contributor.author | Kazuyuki Matsumoto | |
| dc.date.accessioned | 2017-12-30T13:00:11Z | |
| dc.date.available | 2017-12-30T13:00:11Z | |
| dc.date.issued | 2016 | |
| dc.identifier.other | %28ASCE%29ST.1943-541X.0001348.pdf | |
| dc.identifier.uri | http://138.201.223.254:8080/yetl1/handle/yetl/4244388 | |
| dc.description.abstract | This study examines the mechanical performance of large and small cross-laminated timber (CLT) wall panels with different applications. Two CLT structures were subjected to reversed cyclic lateral loads. One structure consisted of 90-mm-thick, large CLT wall panels (6×2.7 m), and the other consisted of 90-mm-thick, small CLT wall panels (1×2.7 m). A weight was installed on the roof of two-story structures to simulate the weight of three-story structures, designed by elastic calculations with a base shear coefficient of 1.0. The number of screws for each joint was determined by a linear finite-element method (FEM) analysis. The experimental results showed that the ultimate capacity of these structures is 60–80% higher than the design load, indicating high structural performance. A three-dimensional, nonlinear analysis was conducted via the FEM, which accurately predicted the mechanical performance of the CLT structures. This design procedure, based on linear analysis, resulted in a conservative design, and simulation using the nonlinear FEM provided an effective tool for design optimization. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Full-Scale Tests and Numerical Analysis of Low-Rise CLT Structures under Lateral Loading | |
| dc.type | Journal Paper | |
| dc.journal.volume | 142 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Structural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0001348 | |
| dc.page | E4015007 | |
| dc.tree | Journal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 004 | |
| dc.contenttype | Fulltext | |