Show simple item record

dc.contributor.authorKai Zhang
dc.contributor.authorTianhong Yang
dc.contributor.authorHaibo Bai
dc.contributor.authorRanjith Pathegama Gamage
dc.date.accessioned2017-12-30T12:58:16Z
dc.date.available2017-12-30T12:58:16Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001040.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244013
dc.description.abstractComprehensive tests were conducted on a longwall face in China to study mining-induced strata movement and fractures. The first and periodic weightings of the main roof were both captured by microseismic (MS) monitoring and support resistance recording and were 64 and 20 m, respectively. Based on the fracture detection through hydrological observations in a borehole, the roof is clearly divided into three zones: water-conductive zone, horizontal fracture, and continuous zone. Following the field investigation, an innovative finite-difference method (FDM) and distinct-element method (DEM) coupled numerical simulation method was proposed, which features simulating the progressive failure of the rock mass from intact to blocky. The numerical study shows that the proposed coupled method can give reasonable explanations for all in situ tests and handle the progressive caving of the rock layers, as well as the accompanying MS activities and response of the hydraulic supports. The proposed coupled method has advantages over a continuum or discrete method in coal mining simulation. Compared with a continuum method, the coupled method can simulate the deformation and collapse of the overburden strata, whereas the continuum method is only applicable before the first weighting of the rock layer, after which it gives wrong results. In contrast, compared with a discrete method where the blocks are factitiously set before and their sizes are mandatory, the coupled method allows the blocks to form automatically based on the failure state of the rock mass.
dc.publisherAmerican Society of Civil Engineers
dc.titleLongwall Mining–Induced Damage and Fractures: Field Measurements and Simulation Using FDM and DEM Coupled Method
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001040
dc.page04017127
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record