• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Longwall Mining–Induced Damage and Fractures: Field Measurements and Simulation Using FDM and DEM Coupled Method

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0001040.pdf (4.783Mb)
    Date
    2018
    Author
    Kai Zhang
    Tianhong Yang
    Haibo Bai
    Ranjith Pathegama Gamage
    Metadata
    Show full item record
    Abstract
    Comprehensive tests were conducted on a longwall face in China to study mining-induced strata movement and fractures. The first and periodic weightings of the main roof were both captured by microseismic (MS) monitoring and support resistance recording and were 64 and 20 m, respectively. Based on the fracture detection through hydrological observations in a borehole, the roof is clearly divided into three zones: water-conductive zone, horizontal fracture, and continuous zone. Following the field investigation, an innovative finite-difference method (FDM) and distinct-element method (DEM) coupled numerical simulation method was proposed, which features simulating the progressive failure of the rock mass from intact to blocky. The numerical study shows that the proposed coupled method can give reasonable explanations for all in situ tests and handle the progressive caving of the rock layers, as well as the accompanying MS activities and response of the hydraulic supports. The proposed coupled method has advantages over a continuum or discrete method in coal mining simulation. Compared with a continuum method, the coupled method can simulate the deformation and collapse of the overburden strata, whereas the continuum method is only applicable before the first weighting of the rock layer, after which it gives wrong results. In contrast, compared with a discrete method where the blocks are factitiously set before and their sizes are mandatory, the coupled method allows the blocks to form automatically based on the failure state of the rock mass.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4244013
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV