Show simple item record

dc.contributor.authorKhalili Sadaghiani, Abdolali
dc.contributor.authorReza Motezakker, Ahmad
dc.contributor.authorVolkan Özpınar, Alsan
dc.contributor.authorÖzaydın İnce, Gözde
dc.contributor.authorKoşar, Ali
dc.date.accessioned2017-11-25T07:17:01Z
dc.date.available2017-11-25T07:17:01Z
dc.date.copyright2017/21/6
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_11_111501.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234354
dc.description.abstractNew requirements for heat exchangers offered pool boiling heat transfer on structured and coated surfaces as one of the promising methods for effective heat removal. In this study, pool boiling experiments were conducted on polyhydroxyethylmethacrylate (pHEMA)-coated surfaces to investigate the effect of surface orientation on bubble dynamics and nucleate boiling heat transfer. pHEMA coatings with thicknesses of 50, 100, and 200 nm were deposited using the initiated chemical deposition (iCVD) method. De-ionized water was used as the working fluid. Experiments were performed on horizontal and inclined surfaces (inclination angles of 10 deg, 30 deg, 50 deg, and 70 deg) under the constant heat flux (ranging from 10 to 80 kW/m2) boundary condition. Obtained results were compared to their plain surface counterparts, and heat transfer enhancements were observed. Accordingly, it was observed that the bubble departure phenomenon was affected by heat flux and wall superheat on bare silicon surfaces, while the supply path of vapor altered the bubble departure process on pHEMA-coated surfaces. Furthermore, the surface orientation played a major role on bubble dynamics and could be considered as a mechanism for fast vapor removal from surfaces. Bubble coalescence and liquid replenishment on coated surfaces had a promising effect on heat transfer coefficient enhancement on coated surfaces. For horizontal surfaces, a maximum enhancement of 25% relative to the bare surface was achieved, while the maximum enhancement was 105% for the inclined coated surface under the optimum condition. iCVD was proven to be a practical method for coating surfaces for boiling heat transfer applications due to the obtained promising results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePool Boiling Heat Transfer Characteristics of Inclined pHEMA-Coated Surfaces
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4036651
dc.journal.fristpage111501
dc.journal.lastpage111501-11
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record