• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Pool Boiling Heat Transfer Characteristics of Inclined pHEMA-Coated Surfaces

    Thumbnail
    View/Open
    ht_139_11_111501.pdf (3.324Mb)
    Date
    2017
    Author
    Khalili Sadaghiani, Abdolali
    Reza Motezakker, Ahmad
    Volkan Özpınar, Alsan
    Özaydın İnce, Gözde
    Koşar, Ali
    Metadata
    Show full item record
    Abstract
    New requirements for heat exchangers offered pool boiling heat transfer on structured and coated surfaces as one of the promising methods for effective heat removal. In this study, pool boiling experiments were conducted on polyhydroxyethylmethacrylate (pHEMA)-coated surfaces to investigate the effect of surface orientation on bubble dynamics and nucleate boiling heat transfer. pHEMA coatings with thicknesses of 50, 100, and 200 nm were deposited using the initiated chemical deposition (iCVD) method. De-ionized water was used as the working fluid. Experiments were performed on horizontal and inclined surfaces (inclination angles of 10 deg, 30 deg, 50 deg, and 70 deg) under the constant heat flux (ranging from 10 to 80 kW/m2) boundary condition. Obtained results were compared to their plain surface counterparts, and heat transfer enhancements were observed. Accordingly, it was observed that the bubble departure phenomenon was affected by heat flux and wall superheat on bare silicon surfaces, while the supply path of vapor altered the bubble departure process on pHEMA-coated surfaces. Furthermore, the surface orientation played a major role on bubble dynamics and could be considered as a mechanism for fast vapor removal from surfaces. Bubble coalescence and liquid replenishment on coated surfaces had a promising effect on heat transfer coefficient enhancement on coated surfaces. For horizontal surfaces, a maximum enhancement of 25% relative to the bare surface was achieved, while the maximum enhancement was 105% for the inclined coated surface under the optimum condition. iCVD was proven to be a practical method for coating surfaces for boiling heat transfer applications due to the obtained promising results.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4234354
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV