Journal of Engineering Materials and Technology: Recent submissions
Now showing items 921-940 of 3257
-
Finite Deformations and Internal Forces in Elastic-Plastic Crystals: Interpretations From Nonlinear Elasticity and Anharmonic Lattice Statics
(The American Society of Mechanical Engineers (ASME), 2009)Large deformation kinematics and internal forces arising from defects in crystalline solids are addressed by a nonlinear kinematic description and multiscale averaging concepts. An element of ... -
Theoretical and Experimental Characterization for the Inelastic Behavior of the Micro-/Nanostructured Thin Films Using Strain Gradient Plasticity With Interface Energy
(The American Society of Mechanical Engineers (ASME), 2009)Thin film technology is pervasive in many applications, including microelectronics, optics, magnetic, hard and corrosion resistant coatings, micromechanics, etc. Therefore, basic research activities ... -
Erratum: “Effect of Strain Gage Length When Determining Residual Stress by Slitting” [Journal of Engineering Materials and Technology, 2007, 129(1), pp. 143–150]
(The American Society of Mechanical Engineers (ASME), 2009)Corrections were made to Table 1 where the number of significant digits therein were increased to twelve, which is necessary to obtain accurate numerical results (tables available for download ... -
Predictive Science and Technology in Mechanics and Materials
(The American Society of Mechanical Engineers (ASME), 2009)The papers represented in this edition of JEMT were birthed from a workshop entitled “Predictive Science and Technology in Mechanics and Materials” hosted by the Center of Advanced Vehicular ... -
Modeling of the Rate Responsive Behavior of Elastomer Foam Materials
(The American Society of Mechanical Engineers (ASME), 2008)Elastomer foam materials are shock absorbers that have been extensively used in applications of electronic packaging. Finite element modeling simulation plays an important role in helping the ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 2008)Beginning in April 2008 there will be a change in the JEMT masthead. Dr. Hussein M. Zbib's name will appear as Editor, and my name will join those of the former editors. Dr. Zbib, who ... -
Accounting for High Stress Gradient by a Modified Weibull Failure Theory
(The American Society of Mechanical Engineers (ASME), 2008)A high stress gradient occurs in a component when the stress, due to external loading, rises asymptotically. The Weibull failure theory overestimates the probability of failure for components ... -
Influence of Ply Sequence and Thermoelastic Stress Field on Asymmetric Delamination Growth Behavior Emanating From Elliptical Holes in Laminated FRP Composites
(The American Society of Mechanical Engineers (ASME), 2008)The present study encompasses the influence of ply sequence and thermoelastic stress field on asymmetric delamination growth behavior emanating from elliptical holes in laminated fiber reinforced ... -
Constitutive Behavior and Temperature Effects in NR and SBR Under Variable Amplitude and Multiaxial Loading Conditions
(The American Society of Mechanical Engineers (ASME), 2008)Knowledge of the stress response of a material to the applied deformations is necessary for many engineering analysis and applications. This paper addresses the observed effects of load sequencing, ... -
Modeling Texture Evolution During Friction Stir Welding of Stainless Steel With Comparison to Experiments
(The American Society of Mechanical Engineers (ASME), 2008)Texture evolution during friction stir welding of stainless steel was investigated using a polycrystal plasticity model together with a three-dimensional, thermomechanically coupled, finite element ... -
Optical Microscopy-Aided Indentation Tests
(The American Society of Mechanical Engineers (ASME), 2008)The contact characteristics of ceramic-metallic interactions are of critical importance in the design of high-speed ceramic rolling contact bearings. This type of interaction is not described well ... -
Nonlinear Analysis of a Thin Circular Functionally Graded Plate and Large Deflection Effects on the Forces and Moments
(The American Society of Mechanical Engineers (ASME), 2008)Nonlinear analysis of a thin circular functionally grade plate is formulated in terms of von Karman’s dynamic equations. The plate thickness is constant and temperature-dependent functionally ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 2008)It is a great honor and privilege for me to begin my term as Editor of the JEMT. I have served and contributed to the JEMT for over 20 years as a reviewer, author, guest editor for ... -
Notch Effect on Low Cycle Fatigue of Sn–3.5Ag Solder
(The American Society of Mechanical Engineers (ASME), 2008)This paper studies the notch effect on low cycle fatigue of Sn–3.5Ag solder. Strain controlled push-pull low cycle fatigue tests were carried out using three circumferential notched specimens ... -
Mechanical Properties of Crimped Mineral Wools: Identification From Digital Image Correlation
(The American Society of Mechanical Engineers (ASME), 2008)Crimped mineral wools are characterized by a strongly anisotropic microstructure, whose local preferential orientation is highly heterogeneous. It is proposed to identify the local anisotropic ... -
A Phenomenological Approach for Real-Time Simulation of the Two-Way Shape Memory Effect in NiTi Alloys
(The American Society of Mechanical Engineers (ASME), 2008)A phenomenological model to simulate the two-way shape memory effect (TWSME) in nickel-titanium alloys (NiTi) is proposed. The model is based on the Prandtl–Ishlinksii operator and it is able ... -
Critical Depth of Cut and Specific Cutting Energy of a Microscribing Process for Hard and Brittle Materials
(The American Society of Mechanical Engineers (ASME), 2008)This paper investigated the scribing process characteristics of the hard and brittle materials including single crystal silicon, STV glass, and sapphire substrate. Under various cutting angles, ... -
Polycrystal Plasticity Based Predictions of Strain Localization in Metal Forming
(The American Society of Mechanical Engineers (ASME), 2008)In this study, a multiscale material model is employed to simulate two metal forming processes: 2D plane strain compression and a 3D biaxial bulge test. A generalized Taylor-type polycrystal ... -
Polycrystal Simulations Investigating the Effect of Additional Slip System Availability in a 6063 Aluminum Alloy at Elevated Temperature
(The American Society of Mechanical Engineers (ASME), 2008)In order to better understand and predict the intragrain heterogeneous deformation in a 6063 aluminum alloy deformed at an elevated temperature, when additional slip systems beyond the usual ... -
Quantitative Stress Analysis of Recrystallized OFHC Cu Subject to Deformation In Situ
(The American Society of Mechanical Engineers (ASME), 2008)Quantitative strain analysis (QSA) provides a means for assessing the orientation-dependent micromechanical stress states in bulk polycrystalline materials. When combined with quantitative texture ...