Journal of Engineering Materials and Technology: Recent submissions
Now showing items 3161-3180 of 3257
-
Discussion: “A Recovery-Athermal Glide Creep Model” (Ostrom, P., and Lagneborg, R., 1976, ASME J. Eng. Mater. Technol., 98, pp. 114–121)
(The American Society of Mechanical Engineers (ASME), 1976) -
An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformation: Part I—Equations Development and Analytical Procedures
(The American Society of Mechanical Engineers (ASME), 1976)A new, unified model simulates many of the structurally significant deformation phenomena associated with both creep and short-time plasticity, including cyclic hardening/softening, Bauschinger effect, ... -
High-Alumina Cement Concrete
(The American Society of Mechanical Engineers (ASME), 1976) -
On Proportional Combined Loading Tests of an Aluminum Alloy and Its Analytical Formulation
(The American Society of Mechanical Engineers (ASME), 1976)Proportional combined loading tests using axial load and torque were conducted on thin-walled tubular specimens of annealed isotropic aluminum alloy 5056. The experimental results showed that the ... -
Deformation Mechanism Maps: Their Use in Predicting Creep Behavior
(The American Society of Mechanical Engineers (ASME), 1976)A simple form of deformation mechanism map is presented which graphically illustrates the behavior of materials under steady-state creep conditions. Examples are given of maps for deformation ... -
Crack Initiation In Grain Boundaries Under Conditions of Steady-State and Cyclic Creep
(The American Society of Mechanical Engineers (ASME), 1976)Nucleation of intergranular cracks during steady-state and cyclic creep is analyzed in detail. The basis of the analysis is that grain boundary sliding produces stress concentrations at inclusions, ... -
Creep, Viscoelasticity and Creep Fracture in Solids
(The American Society of Mechanical Engineers (ASME), 1976) -
An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformation: Part II—Application to Type 304 Stainless Steel
(The American Society of Mechanical Engineers (ASME), 1976)For the deformation model developed in Part I, material constants are calculated from standard test data on type 304 stainless steel. With them, simulations are made of various types of tests, ... -
The Application of “Strain Range Partitioning Method” to Torsional Creep-Fatigue Interaction
(The American Society of Mechanical Engineers (ASME), 1976)The method of strain range partitioning was applied to a series of torsional fatigue tests conducted on tubular 304 stainless steel specimens at 1200°F (649°C). Creep strain was ... -
A Generalization of Plastic Flow Theory With Application to Cyclic Hardening and Softening Phenomena
(The American Society of Mechanical Engineers (ASME), 1976)A generalization of current theories of plasticity is developed. The theory, applicable to arbitrary multiaxial loading histories, requires a strain controlled uniaxial cyclic experiment to specify ... -
Investigation of the Plastic Properties of Certain Ferrous and Nonferrous Materials at High Temperature
(The American Society of Mechanical Engineers (ASME), 1976)Plastic properties of certain carbon steels, brasses, copper, and aluminum are determined between room and recyrstallization temperatures. The investigations are carried out using the tension test ... -
Elevated Temperature Tensile Properties of Weld-Deposited Austenitic Stainless Steels
(The American Society of Mechanical Engineers (ASME), 1976)Trend curves describing the temperature dependence of tensile properties have been formulated for several weld-deposited austenitic stainless steels and also for wrought Type 304. Ratios of ... -
Cumulative Fatigue Damage on Large Steel Specimens Under Axial Programmed Loading With Nonzero Mean Stress
(The American Society of Mechanical Engineers (ASME), 1976)Large specimens of an ASTM E-373-58T steel were subjected to zero-tension cyclic loading, hence with nonzero mean stress, under a repeated programmed pattern of nine stress levels. With the ... -
Creep Testing at Variable Temperature and Load, Experimental and Computational Methods
(The American Society of Mechanical Engineers (ASME), 1976)Design of engineering components for reliable service in conditions where severe load and thermal transients are encountered requires special care. The individual nature of each such application ... -
Some Questions Regarding the Interaction of Creep and Fatigue
(The American Society of Mechanical Engineers (ASME), 1976)Data are presented from fatigue-crack growth tests conducted on Type 304 S.S. in inert environments at elevated temperatures which show that the thermal-activation noted in similar tests run in ... -
Thermal Ratcheting of a Beam Element Having an Idealized Bauschinger Effect
(The American Society of Mechanical Engineers (ASME), 1976)Thermal ratcheting has been analytically investigated for a beam element subjected to a linear temperature variation across its solid rectangular cross section. A linear strain-hardening material ... -
Phenomenological Analysis of Plastic Spherical Indentation
(The American Society of Mechanical Engineers (ASME), 1976)Functional relationships describing the “expected” deformation behavior of a spherically indented surface are obtained by statistical analysis of published data. The representative strain εR of the ... -
Thermal Ratcheting With Kinematic Hardening in a Two-Bar Assembly With Unequal Areas and Properties
(The American Society of Mechanical Engineers (ASME), 1976)An analytical model based on a two-bar assembly with unequal areas and material properties is used to determine inelastic stress-strain behavior under a steady mean load and cyclic thermal ... -
Constitutive Relations for the Nonelastic Deformation of Metals
(The American Society of Mechanical Engineers (ASME), 1976)Constitutive relations for metal nonelastic deformation are proposed. The descriptiion is entirely in terms of real time strain rate. The equations are fully three-dimensional, and the description ... -
Susceptibility to Underclad Cracking in Relation to Chemical Composition
(The American Society of Mechanical Engineers (ASME), 1976)Heat-affected zone cracking under the weld-overlay-cladding has been investigated for the combination of 22 kinds of ferritic base metals and electrodes including strip electrodes of austenitic ...