Journal of Engineering Materials and Technology: Recent submissions
Now showing items 3021-3040 of 3257
-
Elastic-Plastic R-Curves
(The American Society of Mechanical Engineers (ASME), 1978)The principal purpose of this investigation was to study specimen size effects on elastic-plastic type R-curve using HY130 steel plate. Compact specimens ranging in size from 12T to 1T in ... -
On the Theories of Sheet Metal Necking and Forming Limits
(The American Society of Mechanical Engineers (ASME), 1978)The history and the present state of the theory of sheet metal forming limits are reviewed. The theory of necking and plastic instability (Swift-Hill and Marciniak-Kuczyński models) is discussed ... -
Hydrogen Gas Generation in Water Heat Pipes
(The American Society of Mechanical Engineers (ASME), 1978)Water heat pipes were fabricated from 316, 347, and 430 stainless steel, Monel 400, CDA 715, Inconel 600, and Incoloy 800. All of these materials generated varying amounts of hydrogen gas ... -
A Plastic-Strain, Mean-Stress Criterion for Ductile Fracture
(The American Society of Mechanical Engineers (ASME), 1978)We describe a computer model for predicting ductile-fracture initiation and propagation. The model is based on plastic strain. Fracture starts or a crack extends when the integrated product of ... -
A Description of a Study for the Thermal Anneal of Neutron-Embrittled Reactor Vessel Materials
(The American Society of Mechanical Engineers (ASME), 1978)A number of early light water reactor plants were constructed from materials having low initial Charpy upper shelf values and high copper and phosphorus content. As these elements have been ... -
On Time-Temperature Parameters for Correlation of Creep-Rupture Data in Stainless Steel Weldments
(The American Society of Mechanical Engineers (ASME), 1978)The Manson-Haferd, Larson-Miller, and Orr-Sherby-Dorn time-temperature parameters were applied to creep-rupture data obtained from testing two batches of austenitic stainless steel weldments. It was ... -
Contrasting Fracture Models For Granite Under Dynamic Loading
(The American Society of Mechanical Engineers (ASME), 1978)A “symmetric impact” experiment was used as the basis for comparing different models of the fracture mechanism in granite. Two different tensile fracture models were considered, but better results ... -
The Determination of the J-Integral on Precracked Charpy Specimens by Instrumented Impact Testing and Slow-Bend Testing
(The American Society of Mechanical Engineers (ASME), 1978)The fracture criterion JIC is determined on SA-516-70 steel using precracked CVN specimens. The addition of an appropriate side-groove results in a better plane-strain condition at the crack tip ... -
Residual Strains Around Coldworked Fastener Holes
(The American Society of Mechanical Engineers (ASME), 1978)A hole which is plastically expanded and then allowed to contract is referred to as coldworked. The residual strains around holes which were coldworked by an industrial process were measured ... -
Further Developments in Anisotropic Plasticity
(The American Society of Mechanical Engineers (ASME), 1978)A simple extension of Hill’s formulation for anisotropic plasticity which accounts for the distortion of the yield surface, Mij , the strength differential between tension and compression, αi ... -
Assessment of Weld Heat-Affected Zones in a Reactor Vessel Material
(The American Society of Mechanical Engineers (ASME), 1978)The mechanical properties of weld heat-affected zones (HAZ’s) associated with the heavy section, nuclear quality weldments are evaluated and found to be superior to those of the parent base ... -
Fatigue Strength and Maintenance of the Wheel-Axle Assembly for the Japanese Fast Train (Shinkansen)
(The American Society of Mechanical Engineers (ASME), 1978)Since the wheelset (wheel-axle assembly) is one of the most important components of the equipment used in the Shinkansen (new high speed line), high reliability is required to prevent severe ... -
A Comparative Study of Various Empirical Relations Applicable in Hot Strip Rolling
(The American Society of Mechanical Engineers (ASME), 1978) -
JIc Determination Using the Proposed Standard C-Shaped Specimen
(The American Society of Mechanical Engineers (ASME), 1978)The proposed standard C-shaped Specimen for KIc determinations according to ASTM E399 is readily adaptable to load line deflection measurement, and thus to J-integral assessment, using procedures ... -
Fracture Mechanics of Composite Materials
(The American Society of Mechanical Engineers (ASME), 1978)The applicability of fracture mechanics to conventional isotropic materials has been well demonstrated. For fiber-reinforced materials, however, fracture mechanics investigations have met with mixed ... -
Plastic Deformation of Anisotropic Tubes in Hydraulic Bulging
(The American Society of Mechanical Engineers (ASME), 1978)The anisotropy of tubular material is assessed from the values of the width/thickness strain ratio determined in the tension tests. Applying Hill’s theory of plastic anisotropy, these values are ... -
On the Eversion of a Superplastic, Thin Walled Tube
(The American Society of Mechanical Engineers (ASME), 1978) -
Tribology: A Systems Approach to the Science and Technology of Friction, Lubrication and Wear (Tribology Series, 1)
(The American Society of Mechanical Engineers (ASME), 1978) -
The Stress Controlled High Cycle Fatigue Response of a Metastable Beta Titanium Alloy as Influenced by Several Test Variables
(The American Society of Mechanical Engineers (ASME), 1978) -
Application of the R-Curve Concept to Fatigue Crack Growth
(The American Society of Mechanical Engineers (ASME), 1978)Crack growth resistance for both static (rising load) and for cyclic fatigue crack growth has been shown to be a continuous function over a range of 0.1 μm to 10 cm in crack extension for ...