Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2401-2420 of 3257
-
Effective Medium of Unidirectional Short-Fiber Composites by a Self-Consistent Method
(The American Society of Mechanical Engineers (ASME), 1987)A new self-consistent method is proposed to calculate the effective stiffness of unidirectional short-fiber composites where each transversely-isotropic short-fibers is embedded in an infinite ... -
Validation of Advanced Composite Thermal Stress Analysis Methods
(The American Society of Mechanical Engineers (ASME), 1987)The thermal stress analysis of thermally degrading tape wound phenolic composites in rocket nozzles is complicated by the extreme variation of properties with temperature, combined with steep ... -
Dynamic Response of Curved Laminated Plates Subjected to Low Velocity Impact
(The American Society of Mechanical Engineers (ASME), 1987)An analysis to predict the transient response of a thin, curved laminated plate subjected to low velocity transverse impact by a rigid object is presented. The contact force history due to ... -
Surface Integrity in Machining an Annealed Bearing Bronze
(The American Society of Mechanical Engineers (ASME), 1987) -
Impact Energy Absorption of Continuous Fiber Composite Tubes
(The American Society of Mechanical Engineers (ASME), 1987)This paper presents the results of an impact testing program that was conducted to characterize the energy absorption and failure characteristics of selected composite material systems and to ... -
Thermal Stress in a Coated Short Fiber Composite
(The American Society of Mechanical Engineers (ASME), 1987)When a coated short fiber composite is subject to temperature change, thermal stresses in and around the coated fibers are induced due to the mismatch of thermal expansion coefficients of the ... -
Elastic-Plastic Analysis of Directionally Solidified Lamellar Eutectic Composites
(The American Society of Mechanical Engineers (ASME), 1987)Yielding in a crystal structure occurs with plastic slip on preferential planes. It is similar to yielding on maximum shear planes in an isotropic continuum, but in this case the slip is ... -
Predictive Capabilities in Environmentally Assisted Cracking
(The American Society of Mechanical Engineers (ASME), 1987) -
Fracture Analysis of Notched Composites
(The American Society of Mechanical Engineers (ASME), 1987)In this study the problem of part-through cracks emanating from a central notch in a composite laminate is considered. The composite laminate is modeled as an orthotropic plate and along the ... -
Interaction of Mixed Mode Loading on Cyclic Debonding in Adhesively Bonded Composite Joints
(The American Society of Mechanical Engineers (ASME), 1987)A combined experimental and analytical investigation of an adhesively bonded composite joint was conducted to characterize the fracture mode dependence of cyclic debonding. The system studied ... -
Static Mechanical Performance of Composite Elliptic Springs
(The American Society of Mechanical Engineers (ASME), 1987)Composite elliptic spring is a new concept as an application of fiber reinforced plastics in automotive suspensions. It functions in the same vertical deflection mode and packaging space as a ... -
Hygrothermal Damage in Graphite/Epoxy Laminates
(The American Society of Mechanical Engineers (ASME), 1987)The use of micromechanics equations for moisture diffusivity shows that the in situ diffusivity is slightly lower than the bulk diffusivity for matrix resins, thereby indicating absence of any ... -
Parametric Study of Stress-Intensity Factors in Bonded Composite Stringer Panels
(The American Society of Mechanical Engineers (ASME), 1987)Stress-intensity factors are determined for an infinite cracked orthotropic sheet adhesively bonded to an orthotropic stringer. Since the stringer is modeled as a semi-infinite sheet, the solution ... -
Ceramic Materials for Advanced Heat Engines
(The American Society of Mechanical Engineers (ASME), 1987) -
Progressive Failure in Carbon/Epoxy Laminates Under Biaxial Stress
(The American Society of Mechanical Engineers (ASME), 1987)Despite a number of previous investigations, the question of what criterion to use to predict ultimate failure in fiber composite laminates is still open to question, and particulary so when ... -
Direct Measurement of Temperature in High Speed Torsion Tests
(The American Society of Mechanical Engineers (ASME), 1987)A method of directly measuring the temperature rise during high speed torsion tests is described. The test sample is formed by welding two materials of similar mechanical properties but different ... -
Effect of Prior Deformation on the 76-K Fracture Toughness of AISI 304L and AWS 308L Stainless Steels
(The American Society of Mechanical Engineers (ASME), 1987)In this study, the effect of service-induced deformation on the toughness of AISI 304L and its weld metal, A WS 308L was determined. Low temperature compressive loading in the laboratory ... -
An Analysis of Drawbeads in Sheet Metal Forming: Part II—Experimental Verification
(The American Society of Mechanical Engineers (ASME), 1987)This paper presents experimental results obtained for a variety of drawbeads typical of automotive applications, and compares the results with those obtained from the numerical model presented ... -
Advanced Thermoset Composites: Industrial and Commercial Applications
(The American Society of Mechanical Engineers (ASME), 1987) -
Adhesives Technology Handbook
(The American Society of Mechanical Engineers (ASME), 1987)