Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2321-2340 of 3257
-
Introduction to Fine Ceramics
(The American Society of Mechanical Engineers (ASME), 1989) -
Fatigue Crack Growth Prediction Under Random Peaks and Sequence Loading
(The American Society of Mechanical Engineers (ASME), 1989)Fatigue crack growth under random amplitude and sequence loading with peaks following the Rayleigh probability density function is simulated using the probabilistic model. Another attempt at fatigue ... -
Erratum: “Changes in State Variables at Elevated Temperatures” (Journal of Engineering Materials and Technology, 1989, 111, pp. 192–203)
(The American Society of Mechanical Engineers (ASME), 1989) -
Fine Ceramics
(The American Society of Mechanical Engineers (ASME), 1989) -
High Temperature Inelastic Deformation Under Uniaxial Loading: Theory and Experiment
(The American Society of Mechanical Engineers (ASME), 1989)The elevated temperature, uniaxial inelastic deformation behavior of a Ni-base alloy, B1900 + Hf, has been investigated by performing isothermal tensile, creep, cyclic, stress relaxation, and ... -
Accelerated Aging of the Thermal Expansion of Unidirectional Graphite/Epoxy Composites by Thermal Fatigue
(The American Society of Mechanical Engineers (ASME), 1989)The longitudinal coefficient of thermal expansion (α1 ) of unidirectional T300/934 and AS/3501-5A graphite/epoxy (Gr/Ep) composite changes within a thousand thermal cycles at ranges greater than ... -
Preface
(The American Society of Mechanical Engineers (ASME), 1988) -
A Modified Universal Slopes Equation for Estimation of Fatigue Characteristics of Metals
(The American Society of Mechanical Engineers (ASME), 1988)Using extensive data on forty-seven materials including steels, aluminum, and titanium alloys, a new equation has been derived for estimating fatigue properties from simple tensile data at the ... -
Multiaxial Fatigue Damage Criterion
(The American Society of Mechanical Engineers (ASME), 1988)A multiaxial fatigue failure criterion is proposed based on the strain energy density damage law. The proposed criterion is hydrostatic pressure sensitive; includes the effect of the mean stress, ... -
Development of Wear Sensor for Tool Management System
(The American Society of Mechanical Engineers (ASME), 1988)In automatic metalworking systems, in-process tool-life monitoring and quality control of the parts produced play a crucial role. This paper is on the architecture and performance of an ... -
A Finite Element Study of Flat Rolling
(The American Society of Mechanical Engineers (ASME), 1988)Using an Eulerian formulation, a finite element solution for the flat rolling problem is presented. Calculations are performed to establish the effects of roll deformation and of the variation ... -
Biaxial Low Cycle Fatigue for Notched, Cracked, and Smooth Specimens at High Temperatures
(The American Society of Mechanical Engineers (ASME), 1988)Push-pull and reversed torsion tests were carried out for notched, precracked, and smooth hollow cylindrical specimens of type 304 stainless steel at 923K in air. This paper describes the crack ... -
Transient Thermal Load Effects on Coatings Bonded to Cylindrical Substrates and Containing Circumferential Cracks
(The American Society of Mechanical Engineers (ASME), 1988)The effect of a transient thermal load on a coating which is bonded to a cylindrical substrate is analyzed using fracture mechanics by considering the presence of a circumferential edge crack ... -
Surface Small Crack Growth Behavior of Type 304 Stainless Steel in Low-Cycle Fatigue at Elevated Temperature
(The American Society of Mechanical Engineers (ASME), 1988)Surface small crack growth behavior of Type 304 stainless steel during low cycle fatigue under fast-fast and slow-fast cyclings was investigated at a temperature of 873 K by using the smooth ... -
Interfacial Stress Singularities at Free Edge of Hybrid Metal Matrix Composites
(The American Society of Mechanical Engineers (ASME), 1988)Novel hybrid-matrix composites with alternating metallic matrices of different plastic flow resistance offer excellent potential for a superior strength and toughness combination than traditional ... -
Phenomenological Modeling of Hardening and Thermal Recovery in Metals
(The American Society of Mechanical Engineers (ASME), 1988)Modeling of hardening and thermal recovery in metals is considered within the context of unified elastic-viscoplastic theories. Specifically, the choices of internal variables and hardening measures, ... -
Temperature Distribution in a Slab During Hot Rolling
(The American Society of Mechanical Engineers (ASME), 1988)The dependence of the temperature distribution during hot rolling of a steel slab on the speed of rolling, reduction and initial temperature is investigated. It is observed that while the ... -
An Analysis Method for the Dynamic Compaction Processes of Powder Media Within a Die
(The American Society of Mechanical Engineers (ASME), 1988)A method of analysis for the multishock compaction process of die-contained powder media with a plug at one end and an impacting punch at the other end is presented. In the method assumptions ... -
The Effect of Hygrothermal Histories on Matrix Cracking in Fiber Reinforced Laminates
(The American Society of Mechanical Engineers (ASME), 1988)Environmental factors that affect matrix cracking in composite laminates include temperature, moisture content, and hygrothermal history. Matrix cracking in laminates exposed to aircraft environments ... -
Hygrothermal and Strain Rate Effects on Properties of Graphite/Epoxy Composites
(The American Society of Mechanical Engineers (ASME), 1988)A unidirectional graphite/epoxy material was characterized at strain rates ranging from 5 × 10−6 to 5 s−1 under various hygrothermal conditions. A time-temperature-moisture equivalence principle ...