Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1561-1580 of 3257
-
Experimental Investigation of Size Effects of FCC Polycrystal by Shear Banding
(The American Society of Mechanical Engineers (ASME), 1999)Several plasticity phenomena display a size effect where the smaller the size is the stronger its response. This effect relates to the plastic gradients, appearing in plastically inhomogeneous ... -
Constitutive Modeling of Inelastic Solids for Plastic Flow Processes Under Cyclic Dynamic Loadings
(The American Society of Mechanical Engineers (ASME), 1999)The main objective of the paper is the description of the behavior and fatigue damage of inelastic solids in plastic flow processes under dynamic cyclic loadings. Experimental motivations and ... -
Multiscale Polycrystal Plasticity
(The American Society of Mechanical Engineers (ASME), 1999)Polycrystal plasticity models are commonly developed with a narrow focus on the grain as the fundamental unit of crystallographic orientation and anisotropic behavior. However, deformation and ... -
Experimental Study of Internal Variable Evolution in SS304L, at Multiple Rates and Temperatures
(The American Society of Mechanical Engineers (ASME), 1999)Most metals exhibit a deformation-induced uniaxial yield strength asymmetry. Interpreted within the context of macroscale viscoplastic models, it is conventional to describe this yield strength ... -
Stability of Dislocation Short-Range Reactions in BCC Crystals
(The American Society of Mechanical Engineers (ASME), 1999)The stability of short-range reactions between two dislocations of parallel line vectors which glide on two parallel slip planes in BCC crystals is determined. The two dislocations are assumed ... -
The Effect of Tungsten on the Mechanical Properties of Tantalum
(The American Society of Mechanical Engineers (ASME), 1999)This paper reports a study of the mechanical behavior of Ta-W alloys. The results show that tungsten additions increase the yield strength and the rate of work hardening of tantalum. These ... -
Laser-Induced Deformation Patterns in Thin Films and Surfaces
(The American Society of Mechanical Engineers (ASME), 1999)The coupling between surface deformation and defect motion may be at the origin of deformation patterns in thin films under laser irradiation. We analyze the dynamics of laser-induced vacancy ... -
Orientation Imaging Microscopy Investigation of the Compression Deformation of a [011] Ta Single Crystal
(The American Society of Mechanical Engineers (ASME), 1999)High-purity tantalum single crystal cylinders oriented with [011] parallel to the cylinder axis were deformed 10, 20, and 30 percent in compression. The samples took on an ellipsoidal shape ... -
The Interaction Between Point Defects and Edge Dislocation in BCC Iron
(The American Society of Mechanical Engineers (ASME), 1999)We present results of atomistic simulations of the interaction between self interstitial atoms and vacancies with edge dislocations in BCC iron. The calculations are carried out using molecular ... -
Delamination Growth Behavior of a Fabric Reinforced Laminated Composite Under Mode I Fatigue
(The American Society of Mechanical Engineers (ASME), 1999)The purpose of this study is to investigate the delamination growth behavior of a glass fabric reinforced laminated composite under Mode I fatigue loading and to examine the applicability of ... -
Residual Stresses and Surface Roughness in Turning
(The American Society of Mechanical Engineers (ASME), 1999)The fatigue resistance of components is greatly influenced by their surface integrity. In particular, residual stresses and surface roughness are held to be the primary factors influencing fatigue ... -
Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures
(The American Society of Mechanical Engineers (ASME), 1999)The cryogenic interlaminar shear behavior of G-10CR glass-cloth/epoxy laminates has been discussed through theoretical and experimental characterizations. The use of the double-notch shear test for ... -
Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet
(The American Society of Mechanical Engineers (ASME), 1999)The coalescence conditions of plastic zones are calculated for multiple cracks in a riveted stiffened sheet using a strip yield model. The multiple cracks and their plastic zones are treated ... -
Atomistic Simulations for Multiscale Modeling in bcc Metals
(The American Society of Mechanical Engineers (ASME), 1999)Quantum-based atomistic simulations are being used to study fundamental deformation and defect properties relevant to the multiscale modeling of plasticity in bcc metals at both ambient and extreme ... -
Stress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending
(The American Society of Mechanical Engineers (ASME), 1999)A model of a taper-taper adhesive-bonded joint under cylindrical bending has been derived using first-order laminated plate theory. Shear correction factors were used to account for transverse ... -
Effect of Wrought Product Thickness and Stress Ratio on Fatigue Crack Growth Behavior of a Quaternary Aluminium-Lithium Alloy
(The American Society of Mechanical Engineers (ASME), 1999)Effect of thickness on fatigue crack growth (FCG) behavior has been investigated at varying stress ratio in a quaternary Al-Li alloy. The thickness has been observed to influence FCG behavior ... -
Special Issue on Multi-Scale Modeling of Deformation and Fracture
(The American Society of Mechanical Engineers (ASME), 1999) -
Computer Simulation of 3-D Random Distribution of Short Fibers in Metal Matrix Composite Materials
(The American Society of Mechanical Engineers (ASME), 1999)In this paper, the microstructure of “Saffil”-Al2 O3 short fiber reinforced Al-Mg5.5 metal matrix composite material is simulated by computer. In the simulation it is taken into account of that ... -
Elastic Interaction of Defects on Crystal Surfaces
(The American Society of Mechanical Engineers (ASME), 1999)Surface defects corresponding to adatoms, vacancies and steps interact, affecting and often dominating kinetic processes associated with thin-film growth. A discrete harmonic model for the evaluation ... -
A Micromechanics-Based Finite Element Model for Compressive Failure of Notched Uniply Composite Laminates Under Remote Biaxial Loads
(The American Society of Mechanical Engineers (ASME), 1999)A micromechanics based failure initiation predictive capability for analyzing notched composite laminates loaded remotely in multiaxial compression is reported. The model relies on the results from ...