Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1541-1560 of 3257
-
High Temperature Shape Memory Alloys
(The American Society of Mechanical Engineers (ASME), 1999)Several alloy systems can be selected for high-temperature shape memory alloys, defined as alloys with stable reverse transformation temperatures above 120°C. However, due to the lack of ... -
Modeling of Martensite Accommodation Effect on Mechanical Behavior of Shape Memory Alloys
(The American Society of Mechanical Engineers (ASME), 1999)An approach has been presented to account for micro-plastic deformation and stress produced by accommodation of martensite. This has made it possible to describe such phenomena as incomplete ... -
Simulation of Cyclic Displacement by Counterpoised Shape Memory Elements
(The American Society of Mechanical Engineers (ASME), 1999)The most common shape memory actuation procedure involves a shape memory element that works against a conventional elastic biasing element. Actuation is provided by the movement of the contact ... -
On Deformation of A-M Interface in Single Crystal Shape Memory Alloys and Some Related Issues
(The American Society of Mechanical Engineers (ASME), 1999)Recent experimental results on the deformation field of single crystal CuNiAl shape memory alloys (SMA) by using Moiré interference technique are reported and two kinds of austenite-martensite ... -
In-Situ Investigations of the Martensitic Transformation in TiNi by Synchrotron Radiation
(The American Society of Mechanical Engineers (ASME), 1999)By means of synchrotron X-ray diffraction method the stress-induced martensite transformation in TiNi (with two different phase compositions) at room temperature was investigated in situ. It has ... -
R-Phase and Precursory Structures
(The American Society of Mechanical Engineers (ASME), 1999)An analysis of plausible crystal structures of R-phase and precursory structures in Ti-Ni based on solely kinematical data on presence and equivalence of extra-reflections of diffraction patterns, ... -
Anisotropy of Cu-Based Shape Memory Alloys In Tension/Compression Thermomechanical Loads
(The American Society of Mechanical Engineers (ASME), 1999)Tension/compression thermomechanical experiments were performed on oriented CuAlNi shape memory alloy single crystals and CuAlZnMn single and polycrystals. Response of the single crystals in ... -
SMA Pseudoelastic Finite Strains. Theory and Numerical Application
(The American Society of Mechanical Engineers (ASME), 1999)A tridimensional finite element model of isothermal pseudoelastic deformations is proposed in order to analyze and predict the behavior of shape memory alloys (SMA). To perform finite strain ... -
The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part II—Discussion of Experimental Results
(The American Society of Mechanical Engineers (ASME), 1999)An experimental study was performed to determine the effect of aging on martensitic transformations in NiTi, Polycrystalline and single crystal NiTi ([100], [110], and [111] orientations) were ... -
Yield Strength Asymmetry Predictions From Polycrystal Elastoplasticity
(The American Society of Mechanical Engineers (ASME), 1999)Since the 1960s, it has been known that elastoplastic polycrystal models predict asymmetries in the yield strength for polycrystals that have been prestrained. After prestraining in tension, a ... -
The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part I—Aged Microstructure and Micro-Mechanical Modeling
(The American Society of Mechanical Engineers (ASME), 1999)Transmission electron microscopy is used to determine the microstructures of a Ti-50.8 at% Ni alloy given different aging treatments. Two different peak-aging treatments are shown to result in ... -
Mechanical Behavior of an Ni-Ti Shape Memory Alloy Under Axial-Torsional Proportional and Nonproportional Loading
(The American Society of Mechanical Engineers (ASME), 1999)Several biaxial proportional and nonproportional loading experiments are reported for thin-wall tubes of a pseudoelastic Ni-Ti shape memory alloy (SMA). In addition to the mechanical behavior, ... -
Microstructure and Mechanical Properties of Sputter-Deposited Ti-Ni Alloy Thin Films
(The American Society of Mechanical Engineers (ASME), 1999)The shape memory effect, superelasticity and two-way shape memory effect of Ni-rich Ti-Ni sputter-deposited thin films were evaluated quantitatively. The results indicated that they are almost ... -
A Thermodynamical Theory of Plastic Spin and Internal Stress With Dislocation Density Tensor
(The American Society of Mechanical Engineers (ASME), 1999)A thermodynamical theory of elastoplasticity including kinematic hardening and dislocation density tensor is developed. The theory is self-consistent and is based on two fundamental principles of ... -
Special Issue on Shape Memory Alloys
(The American Society of Mechanical Engineers (ASME), 1999) -
Equivalence Between Higher-Order Stress Power and Heat Flux in Energy Equation Based on Lattice Dynamics
(The American Society of Mechanical Engineers (ASME), 1999)The essence of macroscopic quantities in solid mechanics can be grasped by expressing these quantities in terms of kinematic and mechanical quantities of atoms. In this paper, a method is ... -
Coalescence-Controlled Anisotropic Ductile Fracture
(The American Society of Mechanical Engineers (ASME), 1999)The anisotropic ductile fracture of rolled plates containing elongated inclusions is promoted by both the dilational growth of voids and the coalescence process. In the present article, the ... -
Curved Parametric Segments for the Stress Field of 3-D Dislocation Loops
(The American Society of Mechanical Engineers (ASME), 1999)Under applied mechanical forces, strong mutual interaction or other thermodynamic forces, dislocation shapes become highly curved. We present here a new method for accurate computations of self ... -
Gradient Deformation Models at Nano, Micro, and Macro Scales
(The American Society of Mechanical Engineers (ASME), 1999)Various deformation models incorporating higher-order gradients are discussed and their implications are considered in a variety of problems ranging from the determination of the size of dislocation ... -
Dislocation Dynamics Simulations in the Presence of Interacting Cracks
(The American Society of Mechanical Engineers (ASME), 1999)For an understanding failure behavior of crystalline solids, considerable interest is given to investigating interaction effects between the main crack and microcracks in the presence of mobile ...