Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1141-1160 of 3257
-
Characterization of Fatigue Damage Modes in Nicalon/Calcium Aluminosilicate Composites
(The American Society of Mechanical Engineers (ASME), 2005)High-cycle fatigue behavior of Nicalon™ fiber-reinforced calcium aluminosilicate (CAS) glass–ceramic matrix composites (Nicalon™/CAS) was investigated with the aid of a nondestructive evaluation (NDE) ... -
Effects of Local Grain Orientation on Fatigue Crack Growth in Multicrystalline fcc Metallic Materials
(The American Society of Mechanical Engineers (ASME), 2005)The anomalous behavior of microstructurally “short” cracks that can control fatigue life at very high cycles can be attributed to the local conditions around these cracks, since the length scale ... -
Contact Damage of Dental Multilayers: Viscous Deformation and Fatigue Mechanisms
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents the results of recent experimental and finite element studies of contact damage in model dental multilayered systems with equivalent elastic properties to those of crown/join/dentin ... -
Fatigue of As-Fabricated Open Cell Aluminum Foams
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents the results of the combined experimental investigation and digital image correlation (DIC) analysis of the fatigue failure of open cell aluminum foams. Compression–compression ... -
A Cyclic Microbend Study on LIGA Ni Microelectromechanical Systems Thin Films
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents the results of recent studies of cyclic microbend experiments and their consequences for plasticity length-scale phenomena in LIGA Ni microelectromechanical systems (MEMS) thin ... -
An Investigation of the Effects of Microstructure on Fatigue Crack Growth in Ti-6242
(The American Society of Mechanical Engineers (ASME), 2005)Surface and subsurface crack nucleation and growth mechanisms are elucidated for equiaxed (microstructure 1), elongated (microstructure 2), and colony (microstructure 3) microstructures of Ti6242. ... -
Goodman Diagram Via Vibration-Based Fatigue Testing
(The American Society of Mechanical Engineers (ASME), 2005)A new vibration-based fatigue testing methodology for assessing high-cycle turbine engine material fatigue strength at various stress ratios is presented. The idea is to accumulate fatigue energy ... -
Microstructural Characterization of Ultrasonically Welded Aluminum
(The American Society of Mechanical Engineers (ASME), 2005)The microstructure and mechanical properties of ultrasonically welded AA6111-T4 specimens are discussed. The effects of welding time on the mechanical properties of welded joints are investigated. ... -
A Study of Creep in Polysilicon MEMS Devices
(The American Society of Mechanical Engineers (ASME), 2005)Plastic deformation of polysilicon at high temperatures under stress due to creep has been demonstrated at the micro scale. This type of material behavior is generally associated with mechanical ... -
A New Failure Criterion for Woven-Roving Fibrous Composites Subjected to Tension-Compression Local Plane Stresses With Different Stress Ratios
(The American Society of Mechanical Engineers (ASME), 2005)Thin-walled tubular specimens, made from woven-roving glass fiber-reinforced polyester (GFRP) with two fiber orientations, [±45°]2s and [0,90°]2s, were tested under torsional fatigue ... -
Micromechanical Modeling of the Static Loading of an Al 359-SiC MMC
(The American Society of Mechanical Engineers (ASME), 2005)The objective of this work was to use micromechanical finite element models to simulate the static mechanical behavior of a metal matrix composite: a cast Al 359 alloy reinforced with 20% SiC ... -
A Cobalt Diffusion Based Model for Predicting Crater Wear of Carbide Tools in Machining Titanium Alloys
(The American Society of Mechanical Engineers (ASME), 2005)In machining titanium alloys with cemented carbide cutting tools, crater wear is the predominant wear mechanism influencing tool life and productivity. An analytical wear model that relates crater ... -
High Strain-Rate, Small Strain Response of a NiTi Shape-Memory Alloy
(The American Society of Mechanical Engineers (ASME), 2005)The compressive response of a NiTi shape-memory alloy is investigated at various strain rates using UCSD’s modified 12-in. Hopkinson pressure bar and a conventional Instron machine. To obtain a ... -
Modeling of Creep Behavior of a Rotating Disc in the Presence of Both Composition and Thermal Gradients
(The American Society of Mechanical Engineers (ASME), 2005)The creep behavior of a rotating disc made of isotropic composite containing varying amounts of silicon carbide in the radial direction has been investigated in the presence of a thermal ... -
A New Approach for Single Crystal Materials Analysis: Theory and Application to Initial Yielding
(The American Society of Mechanical Engineers (ASME), 2005)A new approach used for single crystal (SC) materials analysis is described. Its principle is based on the extension of predictive models for isotropic material behavior to anisotropic materials ... -
Fatigue Crack Growth Thresholds of Deflected Mixed-Mode Cracks in PWA1484
(The American Society of Mechanical Engineers (ASME), 2005)The fatigue crack growth (FCG) behavior of PWA1484 single crystals was characterized in air under mixed-mode loading at 593°C as a function of crystallographic orientation using an asymmetric ... -
Modeling of Anisotropic Deformation in Superplastic Sheet Metal Stretching
(The American Society of Mechanical Engineers (ASME), 2005)Currently available models describing superplastic deformation are mostly based on uniaxial tensile test data and assume isotropic behavior, thus leading to limited predictive capabilities of ... -
Determining Brinell Hardness From Analysis of Indentation Load-Depth Curve Without Optical Measurement
(The American Society of Mechanical Engineers (ASME), 2005)Hardness tests are performed to determine not only hardness but also other properties such as strength, wear resistance, and deformation resistance. They are also performed to predict residual ... -
The Effect of Tool–Sheet Interaction on Damage Evolution in Electromagnetic Forming of Aluminum Alloy Sheet
(The American Society of Mechanical Engineers (ASME), 2005)A study of the effect of tool–sheet interaction on damage evolution in electromagnetic forming is presented. Free form and conical die experiments were carried out on 1 mm AA5754 sheet. Safe ... -
A New Quantitative Sensitivity Analysis of the Flow Stress of 18 Engineering Materials in Machining
(The American Society of Mechanical Engineers (ASME), 2005)It has long been argued about which effect, among the effects of strain hardening, strain-rate hardening, and temperature softening, is predominant in governing the material flow stress in ...