Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1101-1120 of 3257
-
Effects of CO2 Laser Surface Processing on Fracture Behavior of Silicon Nitride Ceramic
(The American Society of Mechanical Engineers (ASME), 2006)Surface defects generated by grinding deteriorate the flexural strength of the silicon nitride (Si3N4) ceramic. In this paper, CO2 laser surface processing was applied to eliminate the grinding-induced ... -
Small Amplitude Dynamic Properties of Ni48Ti46Cu6 SMA Ribbons: Experimental Results and Modelling
(The American Society of Mechanical Engineers (ASME), 2006)This work illustrates viscoelastic testing and fractional derivative modelling to describe the thermally induced transformation equivalent viscoelastic damping of NiTiCu SMA ribbons. NiTiCu SMA ... -
Effect of H-Doping on Damping Capacity of Various NiTi-Based Alloys at kHz Frequencies
(The American Society of Mechanical Engineers (ASME), 2006)The internal friction Q−1 and the Young’s modulus E of NiTi based alloys have been measured as a function of temperature after various thermomechanical and hydrogen-doping treatments given to ... -
Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites
(The American Society of Mechanical Engineers (ASME), 2006)Shape memory alloy (SMA) hybrid composites with adaptive-stiffening or morphing functions are simulated using finite element analysis. The composite structure is a laminated fiber-polymer composite ... -
Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering
(The American Society of Mechanical Engineers (ASME), 2006)Shape memory alloys (SMAs) have great potential for use in the field of civil engineering. The authors of this paper have been involved, from 1996, in several experimental and theoretical ... -
Seismic Vibration Control Using Superelastic Shape Memory Alloys
(The American Society of Mechanical Engineers (ASME), 2006)Superelastic NiTi shape memory alloy (SMA) wires and bars are studied to determine their damping and recentering capability for applications in the structural control of buildings subjected to ... -
Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys
(The American Society of Mechanical Engineers (ASME), 2006)This paper presents and compares two different uniaxial constitutive models for superelastic shape-memory alloys (SMAs), suitable to study the dependence of the stress-strain relationship on the ... -
Advanced Composite Panels for Seismic and Vibration Mitigation of Existing Structures
(The American Society of Mechanical Engineers (ASME), 2006)In this paper, a conceptual design, fabrication, and testing of advanced polymer matrix composite (PMC) infill system are addressed for seismic retrofitting of steel frames. Such a system is ... -
Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels
(The American Society of Mechanical Engineers (ASME), 2006)This study adopts the application of the electrodischarge machining (EDM) hole-drilling method to the measurement of residual stress in AISI D2 cold work tool steel, AISI H13 hot work tool ... -
Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding
(The American Society of Mechanical Engineers (ASME), 2006)Robotized filament winding technology allows one to manufacture workpieces of high performances as a result of a robot placing fibers impregnated by resin (known as roving) along the directions ... -
Deformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading
(The American Society of Mechanical Engineers (ASME), 2006)Thermal cycling has been experimentally demonstrated to diminish the performance of many reinforced materials. The coefficient of thermal expansion mismatch is the driving force for the development ... -
Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change
(The American Society of Mechanical Engineers (ASME), 2006)The buckling of multiwalled carbon nanotubes under torsional load coupling with temperature change is researched. The effects of torsional load, temperature change, surrounding elastic medium, and ... -
Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion
(The American Society of Mechanical Engineers (ASME), 2006)Determining tearing concerns in numerical simulations of sheet metal components is difficult since the traditional failure criterion, which is strain-based, exhibits a strain path dependence. A ... -
Material Flow in FSW of AA7075-T6 Butt Joints: Continuous Dynamic Recrystallization Phenomena
(The American Society of Mechanical Engineers (ASME), 2006)In the paper the continuous dynamic recrystallization (CDRX) phenomena occurring in the FSW of AA7075-T6 butt joints is investigated at the varying of the most relevant technological and geometrical ... -
Size Effect on Strength of Laminate-Foam Sandwich Plates
(The American Society of Mechanical Engineers (ASME), 2006)Experiments on size effect on the failure loads of sandwich beams with PVC foam core and skins made of fiber-polymer composite are reported. Two test series use beams with notches at the ... -
Special Section on Damping of Shape Memory Alloys, Composites, and Foams
(The American Society of Mechanical Engineers (ASME), 2006)The papers collected in this special issue are the outcome of a workshop held on May 10–11, 2005, at Georgia Tech Lorraine in Metz, France. The workshop brought together 24 participants, 15 ... -
Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242
(The American Society of Mechanical Engineers (ASME), 2006)This paper is aimed at identifying key microstructural parameters that play important roles in the failure initiation of polycrystalline Ti-6242 subjected to creep and dwell loading. A finite ... -
Use of Inverse Solutions for Residual Stress Measurements
(The American Society of Mechanical Engineers (ASME), 2006)For most of the destructive methods used for measuring residual stresses, the relationship between the measured deformations and the residual stresses are in the form of an integral equation, ... -
Effect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites
(The American Society of Mechanical Engineers (ASME), 2006)The present study encompasses the thermoelastic effect of material anisotropy and curing stresses on interlaminar embedded elliptical delamination fracture characteristics in multiply laminated ... -
The Thermo-Viscoelastic, Viscoplastic Characterization of Vetrotex 324∕Derakane 510A-40 Through Tg
(The American Society of Mechanical Engineers (ASME), 2006)The increased use of fiber reinforced plastics (FRPs) in ship topside structures necessitates the need to understand how such structures respond to fire exposure. For this reason we have ...