Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1001-1020 of 3257
-
Mixed Finite Element Analysis of Elastomeric Butt-Joints
(The American Society of Mechanical Engineers (ASME), 2007)This paper presents a mixed finite element formulation approximating large deformations observed in the analysis of elastomeric butt-joints. The rubber has been considered as nearly incompressible ... -
Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve
(The American Society of Mechanical Engineers (ASME), 2007)This paper presents an extended stress-based forming limit curve (XSFLC) that can be used to predict the onset of necking in sheet metal loaded under non-proportional load paths, as well as ... -
Crack Initiation and Growth in Solder Joints Under Cyclic Shear Deformation Using Piezomechanical Actuation
(The American Society of Mechanical Engineers (ASME), 2007)Crack initiation and growth behavior in solder joints under cyclic shear deformation using piezomechanical actuation have been investigated. Experiments were conducted on specimens that consist of ... -
Study of Bolt Load Loss in Bolted Aluminum Joints
(The American Society of Mechanical Engineers (ASME), 2007)Bolted joints are used widely in mechanical design and represent a weak link in a system where loss of joint clamping force can lead to degraded product performance or human injury. To meet ... -
Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate
(The American Society of Mechanical Engineers (ASME), 2007)In this study, a modelization of the viscoplastic behavior of amorphous polymers is proposed, from an approach originally developed for metal behavior at high temperature, in which state variable ... -
Weld Distortion Control During Welding Process With Reverse-Side Heating
(The American Society of Mechanical Engineers (ASME), 2007)An in-process method for controlling welding distortion in fillet welds is developed. It particularly reduces angular distortion by performing reverse-side Tungsten inert gas (TIG) heating of the ... -
Studies on the Effect of Cyclic Loading on Grain Boundary Rupture Time
(The American Society of Mechanical Engineers (ASME), 2007)This paper studies intergranular creep failure of high-temperature service material under a stress-controlled unbalanced cyclic loading condition. The experimentally verified Murakami–Ohno strain-hardening ... -
A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test
(The American Society of Mechanical Engineers (ASME), 2007)In this study, the load-depth (P‐h) relationships matching the experimental results of the nanoindentation tests exhibited at the subregions of small and large depths are obtained, respectively. ... -
Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials
(The American Society of Mechanical Engineers (ASME), 2007)In this paper, we provide two different symmetry cells to describe the shot-peening process. In this multiple impingement model, we study the dynamic behavior of TI-6Al-4V targets subjected to ... -
Pressure Sensitive Nonassociative Plasticity Model for DRA Composites
(The American Society of Mechanical Engineers (ASME), 2007)Discontinuously reinforced aluminum (DRA) is currently used where design considerations include specific stiffness, tailorable coefficient of thermal expansion, or wear resistance. Plastic deformation ... -
On Serrated Plastic Flow in an AA5052-H32 Sheet
(The American Society of Mechanical Engineers (ASME), 2007)Temporal and spatial characteristics of serrated plastic flow or the so-called Portevin-Le Chatelier (PLC) deformation bands in a commercial Al-2.5%Mg sheet metal due to dynamic strain aging ... -
Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting
(The American Society of Mechanical Engineers (ASME), 2007)Orthogonal cutting experiments using a quick-stop device are performed on Al2024-T3 and OFHC copper to study the chip–workpiece interface in a scanning electron microscope. Evidence of ductile ... -
Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation
(The American Society of Mechanical Engineers (ASME), 2007)A model is developed to predict the constitutive flow behavior of as cast 304 stainless steel during hot deformation using artificial neural network (ANN). The inputs of the neural network are ... -
Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method
(The American Society of Mechanical Engineers (ASME), 2007)Background. A centrifugal solid-particle method has been successfully used as a means to fabricate functionally graded materials (FGMs). Various processing parameters significantly influence the ... -
Behavior of Nonhomogeneous Materials Subjected to Bearing Load
(The American Society of Mechanical Engineers (ASME), 2007)The behavior of homogeneous and nonhomogenous materials with linearly varying material property subjected to line loading is investigated using the optical method of coherent gradient sensing. A ... -
A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue
(The American Society of Mechanical Engineers (ASME), 2007)Elevated temperature data for powder metallurgy alloy René 95 generated in vacuum are presented to demonstrate that the life differences observed between surface and internally initiated ... -
Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites
(The American Society of Mechanical Engineers (ASME), 2007)We consider a linearly elastic composite medium, which consists of a homogeneous matrix containing coated spherical inclusions. The composite is modeled by a four phase pattern consisting of ... -
Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid (SiC+Al2O3) Reinforcements
(The American Society of Mechanical Engineers (ASME), 2007)In the present study, monolithic magnesium, nanosized SiC reinforced magnesium and nanosized hybrid (SiC+Al2O3) reinforced magnesium materials have been synthesized by using powder metallurgy route ... -
Development and Characterization of Ductile Mg∕Y2O3 Nanocomposites
(The American Society of Mechanical Engineers (ASME), 2007)Nano-Y2O3 particulates containing ductile magnesium nanocomposites were synthesized using blend-press-sinter powder metallurgy technique followed by hot extrusion. Microstructural characterization of ... -
Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate
(The American Society of Mechanical Engineers (ASME), 2007)The low-velocity impact response of a hybrid titanium composite laminate, known as TiGr, was compared to that of graphite/epoxy composite. The TiGr material comprised of two outer plies of ...