Journal of Energy Resources Technology: Recent submissions
Now showing items 3341-3360 of 3450
-
Engine Fuels From Biomass
(The American Society of Mechanical Engineers (ASME), 1981)Sources of biomass fuels for engines are compared to other synfuels. Biomass can be converted to gaseous and liquid engine fuels by the same processes utilized for coal conversion such as ... -
Long-Distance, High-Volume Transport of Coal by Slurry Pipeline
(The American Society of Mechanical Engineers (ASME), 1981)Several long-distance, high-volume coal slurry transportation systems are planned or proposed for the United States. These new systems offer a method of transport that is both economical and ... -
Heat Transfer to Oil Shale in a Closely Spaced Bundle as an Approximation to a Packed Bed
(The American Society of Mechanical Engineers (ASME), 1981)The heat transfer to a single cylindrical sample of oil shale in a staggered tube bundle was studied both numerically and experimentally in order to evaluate the thermal and chemical processes ... -
Development of Affinity Relations for Modeling Characteristics of Check Valves
(The American Society of Mechanical Engineers (ASME), 1981)The moving element in a check valve assumes positions depending on flow which makes modeling more complicated than that of fixed geometry devices. Thus, it is necessary to determine the force ... -
Jet Piercing of Oil Sands
(The American Society of Mechanical Engineers (ASME), 1981)This paper describes the results of an experimental investigation of the penetration of oil sands by continuous and pulsed high-pressure water jets. Both laboratory and field tests were carried ... -
Packer-Induced Stresses During Hydraulic Well Fracturing
(The American Society of Mechanical Engineers (ASME), 1981)Well bore stresses induced by inflatable packers during hydraulic fracturing operations are investigated. The geologic formation is modeled as an unbounded homogeneous isotropic linear elastic solid ... -
Europe’s Offshore Oil & Gas
(The American Society of Mechanical Engineers (ASME), 1981) -
Laminar-Turbulent Transition in Pipeflow of Casson Model Fluids
(The American Society of Mechanical Engineers (ASME), 1981)Methanol-coal slurries are known to behave as homogeneous non-Newtonian suspensions. Darby has shown that the Casson and Bingham models reasonably describe the rheology of methanol-lignite slurries. ... -
Phase Change Around Insulated Buried Pipes: Quasi-Steady Method
(The American Society of Mechanical Engineers (ASME), 1981)The heat transfer problem for cylinders embedded in a medium with variable thermal properties cannot be solved exactly if phase change occurs. Approximate solutions have been found using the ... -
Design of Discharge Piping for Pressure Relief Systems
(The American Society of Mechanical Engineers (ASME), 1981)The ASME Boiler and Pressure Vessel Code and publications by many manufacturers caution the design engineer to consider back pressure in discharge piping when sizing and selecting pressure relief ... -
McGraw-Hill Encyclopedia of Energy, 2nd Edition
(The American Society of Mechanical Engineers (ASME), 1981) -
The Effect of Magnus Force on the Scale Deposition in Geothermal Systems
(The American Society of Mechanical Engineers (ASME), 1981) -
The Design and Construction of Beaufort Sea Drilling Islands—Sag Delta 7 and 8
(The American Society of Mechanical Engineers (ASME), 1981)The planning, design and construction of two offshore exploratory drilling islands, constructed in the Alaskan Beaufort Sea during the summer of 1980, is described. Emphasis is given to areas ... -
State-of-the-Art of Thermal Recovery Models
(The American Society of Mechanical Engineers (ASME), 1981)Thermal recovery models for oil recovery consist of steam injection and in-situ combustion simulators. At the present time, steam injection simulators have been developed to a point where it ... -
Erratum: “A Simple Model of Seasonal Sea Ice Growth” (Journal of Energy Resources Technology, 1981, 103, pp. 212–218)
(The American Society of Mechanical Engineers (ASME), 1981) -
Enhanced Oil Recovery by Flooding With Dilute Aqueous Chemical Solutions
(The American Society of Mechanical Engineers (ASME), 1981)The theory of enhanced oil recovery by surfactant flooding (micellarpolymer and “low-tension” floods) is based on three premises: that the chemical slug is 1) less mobile than the crude oil, ... -
Field Results From a Linked Vertical Well UCG Test in Deep, Thin-Seam Bituminous Coal
(The American Society of Mechanical Engineers (ASME), 1981)For a first in the United States, a 900-ft (275-m) deep, 6-ft (2-m) thick, swelling, eastern bituminous coal has been gasified successfully in situ. Under the direction of Morgantown Energy ... -
Modeling Requirements for Geopressured-Geothermal Reservoir Production
(The American Society of Mechanical Engineers (ASME), 1981)The modeling requirements for geopressured-geothermal reservoir analysis are discussed and demonstrated in this paper. Compaction effects, reservoir hetereogeneities, localized gas evolution, and shale ... -
Erratum: “Vibrations of Long Marine Pipes due to Vortex Shedding” (Journal of Energy Resources Technology, 1981, 103, pp. 231–236)
(The American Society of Mechanical Engineers (ASME), 1981) -
Duluth Co-Disposal Facility
(The American Society of Mechanical Engineers (ASME), 1981)The world’s first full-scale fluidized bed reactor co-disposal facility located at the Western Lake Superior Sanitary District’s (WLSSD) central waste-water treatment complex in Duluth, Minnesota, ...