Journal of Energy Resources Technology: Recent submissions
Now showing items 3201-3220 of 3450
-
A Comparison of Two Sea Ice Trajectory Models With AIDJEX Observations
(The American Society of Mechanical Engineers (ASME), 1983)Two mathematical models (free drift and complete ice dynamics) that simulate sea ice motions driven by winds and currents are described. Accurate wind and current observations and motion data ... -
Rheology of Foam and Its Implications in Drilling and Cleanout Operations
(The American Society of Mechanical Engineers (ASME), 1983)Experimental analysis was carried out to study the rheological properties of foam. Foam was generated by simultaneously injecting air and an aqueous solution of the foaming agent through a ... -
An LPG Pipeline Break Flow Model
(The American Society of Mechanical Engineers (ASME), 1983)An LPG pipeline break flow model has been develped to evaluate the flammability hazards associated with a pipeline rupture. The model estimates the time-dependent flow rate of LPG from a ... -
Rotary Drill Bit/Rock Model With Cutter Offset
(The American Society of Mechanical Engineers (ASME), 1983)A kinematic model of a roller cone bit is developed and integrated with a rock fracture description to simulate test data from a study on the effects of bit offset. The model predicted bit ... -
Erratum: “Energy Recovery From Solid Wastes” [Journal of Energy Resources Technology, 1983, 105(2), Table of Contents]
(The American Society of Mechanical Engineers (ASME), 1983) -
Energy Losses Related to Automatic Steering of Ships in Waves—Part I: Losses Under Conventional Autopilot Control
(The American Society of Mechanical Engineers (ASME), 1983)Results are presented relating to energy losses due to ship steering in waves. Propulsion losses related to yawing and rudder activity of ships during open-seas course-keeping are evaluated. Two ... -
Buckling of Risers in Tension due to Internal Pressure: Nonmovable Boundaries
(The American Society of Mechanical Engineers (ASME), 1983)Open-ended tubular columns may buckle globally as Euler columns due to the action of internal fluid pressure even while they are in tension along their entire length. Hydraulic columns, marine ... -
A Design Basis for the J-Tube Method of Riser Installation
(The American Society of Mechanical Engineers (ASME), 1983)Economic and technical factors have lead to the use of J-tubes for the connection of subsea pipelines to fixed offshore production platforms. This paper describes some of the technical aspects ... -
Discussion: “Thermal Performance Evaluation of MSW-Fired Steam Generators—A New Approach” (Hecklinger, R. S., and Grillo, L. M., 1983, ASME J. Energy Resour. Technol., 105, pp. 255–257)
(The American Society of Mechanical Engineers (ASME), 1983) -
Statistical Analysis of Slow-Drift Responses
(The American Society of Mechanical Engineers (ASME), 1983)The statistical properties of second-order wave-induced response processes are investigated theoretically. Emphasis is placed on the slow-drift components. The assumed forcing waves are irregular ... -
Time Effects on the Lateral Soil Resistance to Pipeline Movement
(The American Society of Mechanical Engineers (ASME), 1983)Resistance to pipeline motions in cohesive soils is shown to change with time. The following time effects are distinguished: aging of disturbed soil, duration of constant loading on the pipeline ... -
Dynamic Interaction of a Guyed Tower With Its Guying System
(The American Society of Mechanical Engineers (ASME), 1983)A guyed tower offshore platform differs from conventional fixed-base platforms in the way environmental loads are resisted. Horizontal wave, wind and current loads on a guyed tower are resisted ... -
Longitudinal Resonant Behavior of Very Deep Water Risers
(The American Society of Mechanical Engineers (ASME), 1983)This paper is concerned with the problem of longitudinal resonant vibration of a 3000-m-long disconnected riser. Theoretical investigations of natural frequencies and induced displacements and ... -
ARMA Algorithms for Ocean Wave Modeling
(The American Society of Mechanical Engineers (ASME), 1983)Three different algorithms are presented for simulating a time series which is compatible with a given power spectrum of ocean waves. The first algorithm generates the current value of the ... -
Simple Models to Evaluate Dynamic Guyed Tower Response
(The American Society of Mechanical Engineers (ASME), 1983)The Guyed Tower is a system designed for use in relatively deep waters (more than 1000 ft (300m)). A model is described that mimics the response of the tower. This model calculates the ... -
Analysis of Tubular Connections Using a Thin Cylinder Approximation—Part II
(The American Society of Mechanical Engineers (ASME), 1983)The results from Part I of this two-part study are used to predict the performance of threaded connections, in particular API round thread connections. The effects of inelastic deformation, ... -
A Quantitative Evaluation of Two Classical Approximations Used to Predict the Extent of Vertical Hydraulic Fractures
(The American Society of Mechanical Engineers (ASME), 1983)An integral equation was developed to predict the critical parameters (fracture width and length) associated with the propagation of a vertical hydraulic fracture and a numerical solution procedure ... -
The Application of Real Time Flow Modeling to Pipeline Leak Detection
(The American Society of Mechanical Engineers (ASME), 1983)This paper covers the practical and technical aspects of applying transient fluid flow and heat transfer models to a real-time pipeline leak detection system. The system discussed monitors 24 ... -
Analysis and Testing of Factors Affecting Collapse Performance of Casing
(The American Society of Mechanical Engineers (ASME), 1983)This paper describes testing and analysis which demonstrates that collapse specimens tested in short testers with rigid end seals give artificially high collapse values. It also compares the API ... -
Effects of Landfill Cover Design on Methane Recovery Systems
(The American Society of Mechanical Engineers (ASME), 1983)A finite difference computer program to aid in optimizing landfill cover design was developed by the authors. The program was used to compare the methane yield from sand-covered and clay-covered ...