Journal of Energy Resources Technology: Recent submissions
Now showing items 2481-2500 of 3450
-
The Equivalence of Maximum Power and Minimum Entropy Generation Rate in the Optimization of Power Plants
(The American Society of Mechanical Engineers (ASME), 1996)It is shown that to maximize the power output of a power plant is equivalent to minimizing the total entropy generation rate associated with the power plant. This equivalence is illustrated ... -
Incorporation of Phase-Change Materials Into a Ground Thermal Energy Storage System: Theoretical Study
(The American Society of Mechanical Engineers (ASME), 1996)An investigation of a ground thermal energy storage system, which includes storage units containing phase-change materials (PCM), is presented. This study is related to a large-diameter helical ... -
Adiabatic Losses in Stirling Refrigerators
(The American Society of Mechanical Engineers (ASME), 1996)The Stirling cycle has been used very effectively in cryocoolers; but efficiencies relative to the Carnot limit are typically observed to peak for absolute temperature rations of about two, ... -
Exergetic Analysis of Energy Storage using Multiple Phase-Change Materials
(The American Society of Mechanical Engineers (ASME), 1996)This paper presents an exergetic analysis of the charge process in energy storage using multiple phase-change materials (PCMs). Thermal storage using two, three, five, as well as an infinite ... -
Fundamental Factors in the Design of a Fast-Responding Methanol-to-Hydrogen Steam Reformer for Transportation Applications
(The American Society of Mechanical Engineers (ASME), 1996)Improving the dynamic response of the steam reformer in a fuel cell power plant designed for transportation applications will enable the power plant to operate in a transient manner with a ... -
Computer Simulation of a High-Temperature Thermal Energy Storage System Employing Multiple Families of Phase-Change Storage Materials
(The American Society of Mechanical Engineers (ASME), 1996)Previous work by one of the authors entailed modeling of a packed bed thermal energy storage system utilizing phase-change materials (PCM). A principal conclusion reached is that the use of a ... -
Combustion Technology for Low-Emissions Gas-Turbines:Selected Phenomena Beyond NOx
(The American Society of Mechanical Engineers (ASME), 1996)Since recent reviews cover the issues in NOx formation under gas-turbine canditions, and since regulations essentially dictate use of the premixed mode of combustion for minimum NOx , this ... -
Combustion Technology for Low-Emissions Gas-Turbines: Some Recent Modeling Results
(The American Society of Mechanical Engineers (ASME), 1996)Computer modeling of low-emissions gas-turbine combustors requires inclusion of finite-rate chemistry and its intractions with turbulence. The purpose of this review is to outline some recent ... -
Application of Deterministic Chaos Theory to Local Instantaneous Temperature, Pressure, and Heat Transfer Coefficients in a Gas Fluidized Bed
(The American Society of Mechanical Engineers (ASME), 1996)The local instantaneous temperature, heat transfer coefficient, and pressure data, gathered around a horizontal tube in a fluidized bed, have been analyzed using the deterministic chaos theory. ... -
Storage of Fuel in Hydrates for Natural Gas Vehicles (NGVs)
(The American Society of Mechanical Engineers (ASME), 1996)The need for alternative fuels to replace liquid petroleum-based fuels has been accelerated in recent years by environmental concerns, concerns of shortage of imported liquid hydrocarbon, and ... -
Thermal Destruction of Solid Wastes
(The American Society of Mechanical Engineers (ASME), 1996)The United States generates the largest amount of solid waste per person in the world. The old practice of direct landfilling and storage is receiving greater public resistance and is attributing ... -
Latent Heat Effects in Thermoelectric Air Conditioners and Heat Pumps Equipped With a Heat Exchanger
(The American Society of Mechanical Engineers (ASME), 1996)The effects of moisture on the performance of thermoelectric air conditioning systems and heat pumps equipped with a heat exchanger were studied. Coefficients of performance and fluid temperature ... -
Second Law Analysis of Adsorption Cycles With Thermal Regeneration
(The American Society of Mechanical Engineers (ASME), 1996)Adsorption processes can be used for operating environment-friendly refrigeration cycles. When combined with the thermal regeneration process, these cycles can have quite high performance. The ... -
Combined Cycle Gas Turbine Power Plant With Coal Gasification and Solid Oxide Fuel Cell
(The American Society of Mechanical Engineers (ASME), 1996)The United States has extensive coal resources; thus, it is important to consider coal as a fuel for electric power production. This work presents a theoretical study of a novel high-efficiency ... -
ASME Fuels and Combustion Technology Division—75th Anniversary
(The American Society of Mechanical Engineers (ASME), 1996) -
Energetic Fuels for Combustion Applications
(The American Society of Mechanical Engineers (ASME), 1996)New fuels with high-energy-density are desirable for many combustion applications. Two types are reviewed in this paper, namely, mixtures resulting from addition of certain metallic or nonmetallic ... -
Reliability-Based Maintenance Strategies for Heat Exchangers Subject to Fouling
(The American Society of Mechanical Engineers (ASME), 1996)Fouling in heat exchangers is an unavoidable by-product of the heat transfer process. The decision regarding periodic maintenance (cleaning) of the exchangers subject to fouling is generally based ... -
Analysis and Design of an Air-Cycle Microclimate Cooling Device
(The American Society of Mechanical Engineers (ASME), 1996)This paper presents an innovative concept of using air-cycle technology for the development of a microclimate cooling device for use by soldiers in the battlefield. The device is an integrated ... -
JP-8+100: The Development of High-Thermal-Stability Jet Fuel
(The American Society of Mechanical Engineers (ASME), 1996)Jet fuel requirements have evolved over the years as a balance of the demands placed by advanced aircraft performance (technological need), fuel cost (economic factors), and fuel availability ... -
Thermohydraulic Analysis of Ground as a Heat Source for Heat Pumps Using Vertical Pipes
(The American Society of Mechanical Engineers (ASME), 1996)In this study, the use of the ground as the heat source for a heat pump was studied by computer simulation. The heat extraction system consisted of vertical pipes drilled into the ground ...