Journal of Energy Resources Technology: Recent submissions
Now showing items 1701-1720 of 3450
-
Dual Injection Distributed Combustion for Gas Turbine Application
(The American Society of Mechanical Engineers (ASME), 2014)Distributed combustion has been shown to provide significantly improved performance with near zero emissions for stationary gas turbine applications. Characteristics of distributed combustion include uniform thermal field ... -
Cooling Systems for Power Plants in an Energy Water Nexus Era
(The American Society of Mechanical Engineers (ASME), 2014)Potable water is becoming scarce in many areas of the planet as the human population pushes past 7 أ— 109. There is an increasing need for electric power since electricity is essential for modern development and progress. ... -
Optimization of Geophone Array for Monitoring Geologic Carbon Sequestration Using Double Difference Tomography
(The American Society of Mechanical Engineers (ASME), 2014)Synthetic data were analyzed to determine the most costeffective tomographic monitoring system for a geologic carbon sequestration injection site. Doubledifference tomographic inversion was performed on 125 synthetic data ... -
Experimental and Theoretical Efficiency Investigation of Hybrid Electric Vehicle Battery Thermal Management Systems
(The American Society of Mechanical Engineers (ASME), 2014)In this study, a thermodynamic model of a hybrid electric vehicle battery thermal management system (TMS) is developed and the efficiency of the system is determined based on different parameters and operating conditions. ... -
Modeling the Influence of Land Shape on the Energy Production Potential of a Wind Farm Site
(The American Society of Mechanical Engineers (ASME), 2014)During wind farm planning, the farm layout or turbine arrangement is generally optimized to minimize the wake losses, and thereby maximize the energy production. However, the scope of layout design itself depends on the ... -
A Physical Model for Thermoelectric Generators With and Without Thomson Heat
(The American Society of Mechanical Engineers (ASME), 2014)Performance prediction of thermoelectric generators (TEG) is an important work in thermoelectrics and a physical model is quite necessary. Now basic thermoelectric phenomena have been expounded explicitly, modeling a TEG ... -
Time Resolved Two Dimensional Temperature Measurement From Acetylene Oxygen Flame Using Chemical Seeding Spectrocamera
(The American Society of Mechanical Engineers (ASME), 2014)Precise knowledge on temperature and its fluctuation in combustion systems are among the important energy issues in almost all industrial sectors, energy conversion and power fields. In this study, a spectroscopic technique ... -
Analytical Model to Estimate the Downhole Casing Wear Using the Total Wellbore Energy
(The American Society of Mechanical Engineers (ASME), 2013)The increasing complexities of wellbore geometry imply an increasing potential of damage resulting from the casingwear downhole. Much work has been done to quantify and estimate wear in casing; however, the results of such ... -
An Improved Closed Loop Heat Extraction Method From Geothermal Resources
(The American Society of Mechanical Engineers (ASME), 2013)Disposal of produced water and induced earthquakes are two major issues that have endangered development of the geothermal energy as a renewable source of energy. To avoid these problems, circulation of a lowboiling working ... -
Study on Performance Evaluation of Dispersed Particle Gel for Improved Oil Recovery
(The American Society of Mechanical Engineers (ASME), 2013)This work investigates the performance of dispersed particle gel (DPG) by core flow tests including injectivity, selective plugging, thermal stability, and improved oil recovery (IOR). Results showed that the resistance ... -
Effects of the Dispersed Phase on Oil/Water Wax Deposition
(The American Society of Mechanical Engineers (ASME), 2013)In the study of the foundation of the oil / water wax deposition experiment, the emulsification characteristics of crude oil emulsion with high wax content have gradually become the hot research area. In the current research ... -
Density Based Decline Performance Analysis of Natural Gas Reservoirs Using a Universal Type Curve
(The American Society of Mechanical Engineers (ASME), 2013)Modern natural gas reservoir decline performance analysis has traditionally relied on the use of oil type curves along with the concepts of pseudopressure and pseudotime. Alternatively, it also employs empirical curve ... -
Nitrogen Diluted Methane Flames in the Near and Far Field
(The American Society of Mechanical Engineers (ASME), 2013)With the increased utilization of multicomponent fuels, such as natural gas and biogas, in industrial applications, there is a need to be able to effectively model and predict the properties of jet flames for mixed fuels. ... -
Effect of Swirl Number on Combustion Characteristics in a Natural Gas Diffusion Flame
(The American Society of Mechanical Engineers (ASME), 2013)This paper presents the effect of swirl number on combustion characteristics such as temperature, velocity, gas concentrations in a natural gas diffusion flame. Numerial simulations carried out using the commercial ... -
Filter Cake Properties of Water Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan
(The American Society of Mechanical Engineers (ASME), 2013)Previous studies considered the waterbased drilling fluid filter cake as homogenous, containing one layer with an average porosity and permeability. The filter cake was recently proved to be heterogeneous, containing two ... -
Organic Fluids in a Supercritical Rankine Cycle for Low Temperature Power Generation
(The American Society of Mechanical Engineers (ASME), 2013)This paper presents a performance analysis of a supercritical organic Rankine cycle (SORC) with various working fluids with thermal energy provided from a geothermal energy source. In the present study, a number of pure ... -
An Enabling Study of Low Temperature Combustion With Ethanol in a Diesel Engine
(The American Society of Mechanical Engineers (ASME), 2013)Previous research indicates that the low temperature combustion (LTC) is capable of producing ultralow nitrogen oxides (NOx) and soot emissions. The LTC in diesel engines can be enabled by the use of heavy exhaust gas ... -
Effect of Nonideal Solution Behavior on Desalination of a Sodium Chloride Solution and Comparison to Seawater
(The American Society of Mechanical Engineers (ASME), 2013)Proper evaluation of the Gibbs free energy and other properties of seawater and other aqueous solutions is essential in the analysis of desalination systems. Standard seawater has been studied extensively and property data ... -
Effects of Fuel Temperature on Injection Process and Combustion of Dimethyl Ether Engine
(The American Society of Mechanical Engineers (ASME), 2013)To investigate the effects of fuel temperature on the injection process in the fuelinjection pipe and the combustion characteristics of compression ignition (CI) engine, tests on a four stroke, direct injection dimethyl ... -
Principle of Detailed Balance and the Second Law of Thermodynamics in Chemical Kinetics
(The American Society of Mechanical Engineers (ASME), 2013)The principle of detailed balance is shown to be a sufficient condition for the second law of thermodynamics in thermally equilibrated elementary chemical reactions. For an elementary reaction, the principle of detailed ...