Journal of Energy Resources Technology: Recent submissions
Now showing items 1681-1700 of 3450
-
Wind Tower System With a Helical Wind Deflecting Structure, Computational Fluid Dynamics, and Experimental Studies
(The American Society of Mechanical Engineers (ASME), 2014)A wind tower system having a three dimensional heliacal wind deflecting structure is studies in this work. The purpose of the helical structure is to increase the natural wind speed and direct the follow of the wind toward ... -
Damping Pressure Pulsations in a Wave Powered Desalination System
(The American Society of Mechanical Engineers (ASME), 2014)Wavedriven reverse osmosis desalination systems can be a costeffective option for providing a safe and reliable source of drinking water for large coastal communities. Such systems usually require the stabilization of ... -
Evaluation of Fuel Economy and Emissions Reduction for a Motorcycle With Automatic Idling Stop Device
(The American Society of Mechanical Engineers (ASME), 2014)In an attempt to improve the fuel economy and reduce the exhaust emissions of motorcycles, some manufactures have developed commercialized motorcycles equipped with automatic idlingstop and go (AISG) functionality. Even ... -
Thermal Optimization of a Solar Thermal Cooling Cogeneration Plant at Low Temperature Heat Recovery
(The American Society of Mechanical Engineers (ASME), 2014)A simple cooling cogeneration has been developed by coupling a Kalina cycle system (KCS) with a vapor absorption refrigeration (VAR) system. The working fluid used in this theoretical thermodynamic evaluation is ammonia ... -
Renewable Hydrogen Production Using Sailing Ships
(The American Society of Mechanical Engineers (ASME), 2014)Vast ocean areas of planet Earth are exposed yearround to strong wind currents. We suggest that this untapped ocean wind power be exploited by the use of sailing ships. The availability of constantly updated meteorological ... -
Effect of Particle Size and Liquid Viscosity on Erosion in Annular and Slug Flow
(The American Society of Mechanical Engineers (ASME), 2014)Erosion measurements in multiphase slug and annular flow regimes have been made in a horizontal 76.2 mm (3in.) diameter pipe. These flow regimes are selected since they produce higher metal losses than other flow regimes, ... -
Pyrolytic Conversion of Biomass Residues to Gaseous Fuels for Electricity Generation
(The American Society of Mechanical Engineers (ASME), 2014)As petroleum resources are finite, it is imperative to use them wisely in energy conversion applications and, at the same time, develop alternative energy sources. Biomass is one of the renewable energy sources that can ... -
Hydroxyl and Nitric Oxide Distribution in Waste Rice Bran Biofuel Octanol Flames
(The American Society of Mechanical Engineers (ASME), 2014)Twodimensional (2D) visualization of hydroxyl (OH) radical in combustion of biofuel made of waste rice bran oil (called W) mixed with octanol (called O) at different mixture ratios were examined in a laboratory scale ... -
Subsea Electrical Submersible Pump Significance in Petroleum Offshore Production
(The American Society of Mechanical Engineers (ASME), 2014)The use of pumping methods in offshore applications has become common especially in viscous oil production. This follow from the fact they present better efficiency and higher production rate than other lift methods when ... -
Nanoscience and Nanotechnology in Solar Cells
(The American Society of Mechanical Engineers (ASME), 2014)Energy is a big challenge in the coming years. The global population is increasing. Not only are there more people in the world, but the human drive to increase living standards have increased individual energy demands. ... -
Development of a New Correlation of Gas Compressibility Factor (Z Factor) for High Pressure Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2014)Gas compressibility factor or Zfactor for natural gas system can be determined from StandingKatz charts using the pseudocritical gas pressure and temperatures. These charts give accurate values for Zfactors. Reservoir ... -
Reactivity of Iron/Zirconia Powder in Fluidized Bed Thermochemical Hydrogen Production Reactors
(The American Society of Mechanical Engineers (ASME), 2014)A fluidized bed reactor has been developed which uses a twostep thermochemical water splitting process with a peak hydrogen production rate of 47 Ncm3/min.gFe at an oxidation temperature of 850 آ°C. Of particular interest, ... -
Experimental Study of Methane Fuel Oxycombustion in a Spark Ignited Engine
(The American Society of Mechanical Engineers (ASME), 2014)An experimental investigation of methane fuel oxycombustion in a variable compression ratio, sparkignited piston engine has been carried out. Compression ratio, sparktiming, and oxygen concentration sweeps were performed ... -
Grid Convergent Spray Models for Internal Combustion Engine Computational Fluid Dynamics Simulations
(The American Society of Mechanical Engineers (ASME), 2014)A stateoftheart spray modeling methodology is presented. Key features of the methodology, such as adaptive mesh refinement (AMR), advanced liquid–gas momentum coupling, and improved distribution of the liquid phase, are ... -
Hydrogen Production Via Ethanol Steam Reforming Over Ni/Al2O3 Catalysts: Effect of Ni Loading
(The American Society of Mechanical Engineers (ASME), 2014)Catalytic systems play an important role in hydrogen production via ethanol reforming. The effect of Ni loading on the characteristics and activities of Ni/Al2O3 catalysts used in pure ethanol steam reforming are not ... -
The Role of Porous Media in Homogenization of High Pressure Diesel Fuel Spray Combustion
(The American Society of Mechanical Engineers (ASME), 2014)Interest is growing in the benefits of homogeneous charge compression ignition engines. In this paper, we investigate a novel approach to the development of a homogenous chargelike environment through the use of porous ... -
Smart Glass and Its Potential in Energy Savings
(The American Society of Mechanical Engineers (ASME), 2014)Smart glass is such that its properties may be changed by application of a potential across it. The change in properties may be engineered to alter the amount of heat energy that can penetrate the glass which provides ... -
Optimization, Numerical, and Experimental Study of a Propeller Pump as Turbine
(The American Society of Mechanical Engineers (ASME), 2014)Micro hydropower station is one of the clean choices for offgrid points with available hydropotential. The challenging in this type of energy production is the high capital cost of the installed capacity that is worse for ... -
Design, Analysis and Optimization of a Micro CHP System Based on Organic Rankine Cycle for Ultralow Grade Thermal Energy Recovery
(The American Society of Mechanical Engineers (ASME), 2014)This paper presents the results of the application of an advanced thermodynamic model developed by the authors for the simulation of Organic Rankine Cycles (ORCs). The model allows ORC simulation both for steady and transient ... -
Cyclic Combustion Variations in Dual Fuel Partially Premixed Pilot Ignited Natural Gas Engines
(The American Society of Mechanical Engineers (ASME), 2014)Dual fuel pilotignited natural gas engines are identified as an efficient and viable alternative to conventional diesel engines. This paper examines cyclic combustion fluctuations in conventional dual fuel and in dual fuel ...