Journal of Energy Resources Technology: Recent submissions
Now showing items 1241-1260 of 3450
-
Development of Modified Affinity Law for Centrifugal Pump to Predict the Effect of Viscosity
(The American Society of Mechanical Engineers (ASME), 2018)The purpose of this research is to investigate the flow behavior inside a mixed flow type pump operating with fluids of different viscosities using computational fluid dynamics (CFD) with the goal to establish additional ... -
Increasing the Flexibility of Combined Heat and Power Plants With Heat Pumps and Thermal Energy Storage
(The American Society of Mechanical Engineers (ASME), 2018)Combined heat and power (CHP) plants are efficient regarding fuel, costs, and emissions compared to the separate generation of heat and electricity. Sinking revenues from sales of electricity due to sinking market prices ... -
29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS)
(The American Society of Mechanical Engineers (ASME), 2018)This special issue of the Journal of Energy Resources Technology (JERT) is dedicated to the 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS), ... -
Extending Substitution Limits of a Diesel–Natural Gas Dual Fuel Engine
(The American Society of Mechanical Engineers (ASME), 2018)New drilling techniques have increased availability and decreased costs of oil and gas. The decreased costs have caused an increase in drilling activity. The well sites have a large power demand that is typically met by ... -
Numerical and Experimental Study on Performance Enhancement of Darrieus Vertical Axis Wind Turbine With Wingtip Devices
(The American Society of Mechanical Engineers (ASME), 2018)Darrieus type vertical axis wind turbines (VAWT) are being used commercially nowadays; however, they still need to improve in terms of performance as they work in an urban environment where the wind speeds are low and the ... -
Discrete Vibration Stability Analysis With Hydromechanical Specific Energy
(The American Society of Mechanical Engineers (ASME), 2018)Drill-bit vibrations and bit wear have been identified as the two major causes for premature polycrystalline diamond-compact (PDC) bit failure and difficulty in accurately predicting PDC bit performance. The objective of ... -
Dynamic Dispersion Coefficient of Solutes Flowing in a Circular Tube and a Tube-Bundle Model
(The American Society of Mechanical Engineers (ASME), 2018)Mathematical formulations have been proposed and verified to determine dynamic dispersion coefficients for solutes flowing in a circular tube with fully developed laminar flow under different source conditions. Both the ... -
A Lumped Thermodynamic Model of Gas Turbine Blade Cooling: Prediction of First-Stage Blades Temperature and Cooling Flow Rates
(The American Society of Mechanical Engineers (ASME), 2018)Turbine inlet temperatures (TIT) of 1500–2000 K have become a sort of standard for most modern advanced applications. First-stage blades are obviously the most exposed components to such hot gases, and thus they need proper ... -
Optimization and Estimation of the Thermal Energy of an Absorber With Graphite Disks by Using Direct and Inverse Neural Network
(The American Society of Mechanical Engineers (ASME), 2018)The most critical component of an absorption heat transformer (AHT) is the absorber, by which the exothermic reaction is carried out, resulting in a useful thermal energy. This article proposed a model based on improving ... -
Analysis of Fouling Degree of Individual Heating Surfaces in a Pulverized Coal Fired Boiler
(The American Society of Mechanical Engineers (ASME), 2018)The paper presents the method of fouling degree evaluation of the heating surfaces in pulverized coal-fired boiler during coal combustion and biomass co-combustion. The fouling processes have a negative impact on the boiler ... -
Reduced Chemical Kinetic Mechanisms for Oxy/Methane Supercritical CO2 Combustor Simulations
(The American Society of Mechanical Engineers (ASME), 2018)Reduced mechanisms are needed for use with computational fluid dynamic codes (CFD) utilized in the design of combustors. Typically, reduced mechanisms are created from a detailed mechanism, which contain numerous species ... -
Optimal Generation Maintenance Schedule for Bundled Wind–Thermal Generation System
(The American Society of Mechanical Engineers (ASME), 2018)Bundled wind–thermal generation system (BWTGS) is an effective way to utilize remote large–scale wind power. The optimal generation maintenance schedule (GMS) for BWTGS is not only helpful to improve the system reliability ... -
Impact of Air Quality and Site Selection on Gas Turbine Engine Performance
(The American Society of Mechanical Engineers (ASME), 2018)Air pollution can have detrimental effects on gas turbine performance leading to blade fouling, which reduces power output and requires frequent cleanings. This issue is a fairly well-known phenomenon in the power industry. ... -
Sorption Hysteresis Characterization of CH4 and CO2 on Anthracite, Bituminous Coal, and Lignite at Low Pressure
(The American Society of Mechanical Engineers (ASME), 2018)Sorption hysteresis characterization of CH4 and CO2 on lignite, bituminous coal, and anthracite were studied to improve the understanding of the interaction between gas molecules and different ranks of coal and further ... -
Pore-Scale Transport Mechanisms and Macroscopic Displacement Effects of In-Situ Oil-in-Water Emulsions in Porous Media
(The American Society of Mechanical Engineers (ASME), 2018)Oil-in-water (O/W) emulsions are expected to be formed in the process of surfactant flooding for heavy oil reservoirs in order to strengthen the fluidity of heavy oil and enhance oil recovery. However, there is still a ... -
Shock Tube Demonstration of Acousto-Optically Modulated Quantum Cascade Laser as a Broadband, Time-Resolved Combustion Diagnostic
(The American Society of Mechanical Engineers (ASME), 2018)We provide the first demonstration of an acousto-optically modulated quantum cascade laser (AOM QCL) system as a diagnostic for combustion by measuring nitric oxide (NO), a highly regulated emission produced in gas turbines. ... -
Evaluating Oil Potential in Shale Formations Using Terahertz Time-Domain Spectroscopy
(The American Society of Mechanical Engineers (ASME), 2018)Optical assessment of oil shale using terahertz time-domain spectroscopy (THz-TDS) was carried out to study oil potential. Fischer assay testing was employed to obtain the oil yield of oil shale specimens to examine the ... -
Performance Assessment and Optimization of a Thermophotovoltaic Converter–Thermoelectric Generator Combined System
(The American Society of Mechanical Engineers (ASME), 2018)To evaluate the feasibility of the performance enhancement of a thermophotovoltaic (TPV) converter by using a thermoelectric generator (TEG), a new model of a combined system is established, where the TEG is attached on ... -
Numerical Study on Heat Transfer Enhanced in a Microcombustor With Staggered Cylindrical Array for Micro-Thermophotovoltaic System
(The American Society of Mechanical Engineers (ASME), 2018)In consideration of high heat transfer efficiency and stable combustion, a new type of microplanar combustor for micro-thermophotovoltaic (micro-TPV) system is proposed, in which the heat transfer is enhanced by staggered ... -
Effect of CO2 on Heavy Oil Recovery and Physical Properties in Huff-n-Puff Processes Under Reservoir Conditions
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, experimental and numerical techniques have been utilized to quantify heavy oil properties in CO2 huff-n-puff processes under reservoir conditions. Experimentally, fluid properties together with viscosity ...