Journal of Energy Resources Technology: Recent submissions
Now showing items 1161-1180 of 3450
-
A Comprehensive Investigation on the Effects of Biomass Particle Size in Cellulosic Biofuel Production
(The American Society of Mechanical Engineers (ASME), 2018)Biofuels derived from cellulosic biomass offer one of the best near- to midterm alternatives to petroleum-based liquid transportation fuels. Biofuel conversion is mainly done through a biochemical pathway in which size ... -
A Parametric Study on a Subcritical CO2/NH3 Cascade Refrigeration System for Low Temperature Applications
(The American Society of Mechanical Engineers (ASME), 2018)Adverse effects of synthetic refrigerants on the environment have led to replacing them with natural refrigerants. The common candidates are ammonia, carbon dioxide, and several hydrocarbon compounds and their mixtures. ... -
Thermodynamic Analysis on Reaction Characteristics of the Coupling Steam, CO2 and O2 Reforming of Methane
(The American Society of Mechanical Engineers (ASME), 2018)This study presents an analysis of coupling steam, CO2 and O2 reforming of CH4 using the thermodynamic equilibrium constant method. Effects of molar ratio of O2/CH4, H2O/CH4 and CO2/CH4 on reforming characteristics in both ... -
Transient Cold Flow Simulation of Fast Fluidized Bed Fuel Reactors for Chemical-Looping Combustion
(The American Society of Mechanical Engineers (ASME), 2018)Circulating fluidized bed in chemical-looping combustion (CLC) is a recent technology that provides great advantage for gas–solid interaction and efficiency. In order to obtain a thorough understanding of this technology ... -
Experimental Research on Catalytic Combustion Characteristics of Inferior Coal and Sludge Mixture
(The American Society of Mechanical Engineers (ASME), 2018)Catalytic effects of metal oxides on combustion characteristics of inferior coal, sludge, and their mixture were investigated by thermogravimetric analysis. Combustion and thermal dynamic characteristics including ignition ... -
Comparison of Single and Multiple Injection Strategies in a Butanol Diesel Dual Fuel Engine
(The American Society of Mechanical Engineers (ASME), 2018)A turbocharged three cylinder automotive common rail diesel engine was modified to operate in the n-butanol diesel dual fuel mode. The quantity of butanol injected by the port fuel injectors and the rail pressure, injection ... -
Performance Assessments of Organic Rankine Cycle With Internal Heat Exchanger Based on Exergetic Approach
(The American Society of Mechanical Engineers (ASME), 2018)This study makes energy and exergy analysis of a sample organic Rankine cycle (ORC) with a heat exchanger which produces energy via a geothermal source with a temperature of 140 °C. R600a is preferred as refrigerant to be ... -
Centrifugal Compressor Performance Improvements Through Impeller Splitter Location
(The American Society of Mechanical Engineers (ASME), 2018)The splitter blades are very common to use for centrifugal compressor impellers to improve the compressor performance and manufacturing capability. In this study, a low-flow single-stage centrifugal compressor with a ... -
Effects of Asymmetric Radial Clearance on Performance of a Centrifugal Compressor
(The American Society of Mechanical Engineers (ASME), 2018)The centrifugal compressors are widely used in industrial applications. The design, manufacturing, and installation are all critical for the compressor performance. Many studies have been carried out in the past to optimize ... -
Special Issue on Recent Advances in Fundamentals and Applications of Biomass Energy
(The American Society of Mechanical Engineers (ASME), 2018)Biomass energy is a promising sustainable alternative for rapidly depleting fossil fuels. This form of energy is widely being considered by policy makers, scientific researchers, and engineers worldwide since the energy ... -
Weathering/Ageing of Liquefied Natural Gas Cargoes During Marine Transport and Processing on Floating Storage Units and FSRU
(The American Society of Mechanical Engineers (ASME), 2018)The phenomenon of liquefied natural gas (LNG) cargo weathering is considered in terms of the conditions influencing boil-off gas (BOG) rates during the offshore movements and handling of LNG on marine LNG carriers (LNGC), ... -
Finite Element Analysis of Thermally Induced Stresses in the Near-Wellbore Region During Invasion of Mud Into Fractures
(The American Society of Mechanical Engineers (ASME), 2018)A severe lost circulation event is usually associated with emanation and propagation of pre-existing or drilling induced fractures from the wellbore. To combat lost circulation and prevent further fracture propagation, a ... -
Developments in Fermentative Butanol Production as an Alternative Biofuel Source
(The American Society of Mechanical Engineers (ASME), 2018)Biobutanol is an attractive, economical, and sustainable alternative fuel to petroleum oil which are depleting in sources due to the diminishing oil reserves and creating an increase in the concentrations of greenhouse ... -
Determination of Viscosity and Wall Slip Behavior of a Polymer-Gel Used for Leakage Control From Couette Viscometry Data
(The American Society of Mechanical Engineers (ASME), 2018)Polymer-gel, as a rheological complex fluid, is vulnerable to slip at solid walls. If wall slip occurs, the accuracy of viscosity measurements that are based on the no-slip boundary condition assumption is affected. This ... -
Secondary Spontaneous Combustion Characteristics of Coal Based on Programed Temperature Experiments
(The American Society of Mechanical Engineers (ASME), 2018)In this report, the influence of pre-oxidation degree and ventilation flow on the parameters of spontaneous combustion of coal (temperature, gas concentration, and exothermic intensity) was studied in six sets of programed ... -
Numerical Study on Fuel Preheating at Cold Start Phase in an Ethanol Flex Fuel Engine
(The American Society of Mechanical Engineers (ASME), 2018)The low vapor pressure of ethanol and the high latent heat of vaporization at low temperatures cause the difficulties of cold start in a flex fuel vehicle when it is fueled with pure ethanol. Preheating fuel is one of the ... -
Novel Coal-Steam Gasification With a Thermochemical Regenerative Process for Power Generation
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, a novel high-efficiency coal gasification technology is proposed in which a regenerative unit is applied to recover syngas sensible heat to generate steam; then, the high-temperature steam is used to gasify ... -
Free-Piston Linear Generator and the Development of a Solid Lubrication System
(The American Society of Mechanical Engineers (ASME), 2018)The free-piston linear generator (FPLG) is a new electromechanical generator. It converts chemical energy into electrical energy by means of a combustion process, a linear generator, and a gas spring. The FPLG does not use ... -
Correcting Inflow Performance Relationship Curves for Explicitly Coupling Reservoir Simulations and Production Systems Simulations
(The American Society of Mechanical Engineers (ASME), 2018)There are many ways to integrate reservoir and production system simulations to forecast production, in a single model (implicit) or in coupled models (explicit). Explicit coupling, a simple and flexible coupling method, ... -
Steam-Oil Ratio in Steam-Solvent Coinjection Simulation for Homogeneous and Heterogeneous Bitumen Reservoirs
(The American Society of Mechanical Engineers (ASME), 2018)This research presents a mechanistic analysis of expanding-solvent steam-assisted gravity drainage (ES-SAGD) for heterogeneous reservoirs in terms of cumulative steam-oil ratio (SOR) as a function of cumulative bitumen ...