Journal of Energy Resources Technology: Recent submissions
Now showing items 1081-1100 of 3450
-
Mathematical Modeling of a Biomass Steam Gasifier—A Modified Equilibrium Approach
(The American Society of Mechanical Engineers (ASME), 2018)A large potential is contributed to the energetic utilization of biomass, whereby thermochemical gasification seems to be especially interesting. In order to contribute to a better understanding of the thermochemical ... -
Performance Analysis of a Solid Oxide Fuel Cell-Gasifier Integrated System in Co-Trigenerative Arrangement
(The American Society of Mechanical Engineers (ASME), 2018)The use of renewable sources, such as woody biomass waste, for energy purposes helps to reduce the consumption of fossil fuels and therefore the production of associated pollutants and greenhouse gases. Solid oxide fuel ... -
Effect of CO2/N2 Dilution on Premixed Methane–Air Flame Stability Under Strained Conditions
(The American Society of Mechanical Engineers (ASME), 2018)Effect of CO2/N2 Dilution on Premixed Methane–Air Flame Stability Under Strained Conditions;The effects of adding N2 or CO2 as diluents to a premixed methane–air flames under strain conditions (associated with a stagnation ... -
Experimental Investigation Into the Characteristics of Chars Obtained From Fast Pyrolysis of Different Biomass Fuels
(The American Society of Mechanical Engineers (ASME), 2018)Biomass is a promising alternative energy source for fossil fuel with the advantages of abundance, renewability, environmental friendliness, etc. This makes the development of biomass technology be of great potential and ... -
Exergy Analysis-Potential of Salinity Gradient Energy Source
(The American Society of Mechanical Engineers (ASME), 2018)Mixing of fresh (river) water and salty water (seawater or saline brine) in a controlled environment produces an electrical energy known as salinity gradient energy (SGE). Two main conversion technologies of SGE are ... -
Dimensionless Scaling Parameters During Thermal Flooding Process in Porous Media
(The American Society of Mechanical Engineers (ASME), 2018)The scaling concept is important, effective, and consistent in any application of science and engineering. Scaled physical models have inimitable advantages of finding all physical phenomena occurring in a specific process ... -
Trio-V Wind Analyzer: A Generic Integral System for Wind Farm Suitability Design and Power Prediction Using Big Data Analytics
(The American Society of Mechanical Engineers (ASME), 2018)A fast-growing worldwide interest is directed toward green energies. Due to the huge costs of wind farms establishment, the location for wind farms should be carefully determined to achieve the optimum return of investment. ... -
Thermodynamic Analysis of Power Generation Cycles With High-Temperature Gas-Cooled Nuclear Reactor and Additional Coolant Heating Up to 1600 °C
(The American Society of Mechanical Engineers (ASME), 2018)Nuclear energy is one of the possibilities ensuring energy security, environmental protection, and high energy efficiency. Among many newest solutions, special attention is paid to the medium size high-temperature gas-cooled ... -
Application of Artificial Intelligence Techniques to Estimate the Static Poisson's Ratio Based on Wireline Log Data
(The American Society of Mechanical Engineers (ASME), 2018)Static Poisson's ratio (νstatic) is a key factor in determine the in-situ stresses in the reservoir section. νstatic is used to calculate the minimum horizontal stress which will affect the design of the optimum mud widow ... -
Effectiveness of Central Swirlers in the Thermal Uniformity of Jet-in-Crossflow Mixing
(The American Society of Mechanical Engineers (ASME), 2018)The present paper introduces the analysis-led-design concept in attaining the thermal homogeneity at the exit section of a mixing chamber. Staggered holes (SH) chamber type is representing jet-in-crossflow (JICF) where ... -
The Influences of CO2 Injection Pressure on CO2 Dispersion and the Mechanism of CO2–CH4 Displacement in Shale
(The American Society of Mechanical Engineers (ASME), 2018)The effects of CO2 injection pressure (PCO2) on CO2 dispersion and the mechanism of CO2–CH4 displacement in a shale sampled from Changning of China were studied. Results indicated that Coats–Smith dispersion–capacitance ... -
Equilibrium and Kinetics of Water Vapor Adsorption on Shale
(The American Society of Mechanical Engineers (ASME), 2018)Water vapor adsorption and desorption isotherms and kinetics studies on three Sichuan Basin shale samples were performed at 298 K by an accurate gravimetric method. The adsorption equilibrium data were fitted using both ... -
Study of Buoyancy-Driven Flow Effect on Salt Gradient Solar Ponds Performance
(The American Society of Mechanical Engineers (ASME), 2018)Salt gradient solar ponds are the ponds in which due to existence of saline and salt gradient layers, lower layers are denser and avoid the natural convection phenomenon to occur so that solar radiation energy can be stored ... -
Investigating the Relation Between Sorption Tendency and Hydraulic Properties of Shale Formations
(The American Society of Mechanical Engineers (ASME), 2018)Routine measurement of hydraulic diffusivity of ultralow permeability rocks, such as shale, is a prolonged process. This study explores the effects of a sorptive characteristic of the porous medium on hydraulic diffusivities ... -
Modeling and Analysis of Onboard Refueling Vapor Evaporative Emission for Hybrid Electric Vehicle
(The American Society of Mechanical Engineers (ASME), 2018)Fuel vapor-containment system (FVS) is a kind of vapor recovery device in the hybrid electric vehicle (HEV) and has a great advantage on the fuel vapor recovery. The general refueling progress of the FVS has been studied ... -
Experimental and Theoretical Analysis of the Goswami Cycle Operating at Low Temperature Heat Sources
(The American Society of Mechanical Engineers (ASME), 2018)The Goswami cycle is a cycle that combines an ammonia–water vapor absorption cycle and a Rankine cycle for cooling and mechanical power purposes by using thermal heat sources such as solar energy or geothermal steam. In ... -
A Comprehensive Wellbore Stability Model Considering Poroelastic and Thermal Effects for Inclined Wellbores in Deepwater Drilling
(The American Society of Mechanical Engineers (ASME), 2018)Exploring and developing oil and gas in deepwater field is an important trend of the oil and gas industry. Development of deepwater oil and gas fields from a platform always requires a number of directional wells or extended ... -
Physics of Proppant Transport Through Hydraulic Fracture Network
(The American Society of Mechanical Engineers (ASME), 2018)Horizontal drilling with successful multistage hydraulic fracture treatments is the most widely applied and effective method to enable economic development of hydrocarbon-bearing shale reservoirs. Once fracture networks ... -
Sand Transport in Slightly Upward Inclined Multiphase Flow
(The American Society of Mechanical Engineers (ASME), 2018)In order to assess the critical sand deposition condition, a unique 4-in ID test facility was designed and constructed, which enables the pipe to be inclined 1.5 deg upward. Experiments were conducted with air–water-glass ... -
Computational Fluid Dynamics Modeling of Gas–Liquid Cylindrical Cyclones, Geometrical Analysis
(The American Society of Mechanical Engineers (ASME), 2018)The gas–liquid cylindrical cyclone (GLCC) is a widely used alternative for gas–liquid conventional separation. Besides its maturity, the effect of some geometrical parameters over its performance is not fully understood. ...