Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 861-880 of 5605
-
Robust Tracking Control of a Class of Switched Nonlinear Systems With Input Delay Under Asynchronous Switching
(The American Society of Mechanical Engineers (ASME), 2018)This paper concerns the problems of stability and robust model reference tracking control for a class of switched nonlinear systems with input delay under asynchronous switching. By proposing a new Lyapunov–Krasovskii ... -
Two Degrees-of-Freedom Fractional-Order Proportional–Integral–Derivative-Based Temperature Control of Fermentation Process
(The American Society of Mechanical Engineers (ASME), 2018)Temperature is one of the essential parameter in a fermentation process, which affects the thermal movement of cells. The temperature range for such processes is very tight and must be maintained precisely for efficient ... -
Experimental Validation of Graph-Based Hierarchical Control for Thermal Management
(The American Society of Mechanical Engineers (ASME), 2018)This paper proposes and experimentally validates a hierarchical control framework for fluid flow systems performing thermal management in mobile energy platforms. A graph-based modeling approach derived from the conservation ... -
Transmission Line Modeling of Inclined Compressible Fluid Flows
(The American Society of Mechanical Engineers (ASME), 2018)Compressible fluid flow modeling for inclined lines is a challenging phenomenon due to the nonlinearity of the governing equations and the spatial–temporal dependency of the fluid density. In this paper, the transmission ... -
Approximation-Free Output-Feedback Control of Uncertain Nonlinear Systems Using Higher-Order Sliding Mode Observer
(The American Society of Mechanical Engineers (ASME), 2018)A novel output-feedback controller for uncertain single-input single-output (SISO) nonaffine nonlinear systems is proposed using high-order sliding mode (HOSM) observer, which is a robust exact finite-time convergent ... -
A Random Walk Model Approach for the Wheel-Rail Contact Force Estimation
(The American Society of Mechanical Engineers (ASME), 2018)The wheel-rail contact strongly influences the dynamics of the railway vehicles. This interaction is affected by several conditioning factors such as vehicle speed, wear, and adhesion level, and, moreover, it is nonlinear. ... -
Reduced-Order Distributed Fault Diagnosis for Large-Scale Nonlinear Stochastic Systems
(The American Society of Mechanical Engineers (ASME), 2018)This paper deals with the distributed fault detection and isolation problem of uncertain, nonlinear large-scale systems. The proposed method targets applications where the computation requirements of a full-order ... -
Analysis of Optimal Balancing for Robotic Manipulators in Repetitive Motions
(The American Society of Mechanical Engineers (ASME), 2018)Balancing plays a major role in performance improvement of robotic manipulators. From an optimization point of view, some balancing parameters can be modified to decrease motion cost. Recently introduced, this concept is ... -
The Design of Input Shapers Which Eliminate Nonzero Initial Conditions
(The American Society of Mechanical Engineers (ASME), 2018)Input shaping is widely used in the control of flexible systems due to its effectiveness and ease of implementation. Due to its open-loop nature, it is often overlooked as a control method in systems where parametric ... -
Adjoint- and Hybrid-Based Hessians for Optimization Problems in System Identification
(The American Society of Mechanical Engineers (ASME), 2018)An adjoint sensitivity-based approach to determine the gradient and Hessian of cost functions for system identification of dynamical systems is presented. The motivation is the development of a computationally efficient ... -
Polynomial Chaos-Based Controller Design for Uncertain Linear Systems With State and Control Constraints
(The American Society of Mechanical Engineers (ASME), 2018)For linear dynamic systems with uncertain parameters, design of controllers which drive a system from an initial condition to a desired final state, limited by state constraints during the transition is a nontrivial problem. ... -
Consensus-Based Cooperative Formation Control for Multiquadcopter System With Unidirectional Network Connections
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, we consider cooperative control issues for a multi-unmanned aerial vehicle (UAV) system. We propose a cooperative formation control strategy with unidirectional network connections between UAVs. Our strategy ... -
Modeling, Estimation, and Control of HCCI Engine With In-Cylinder Pressure Sensing
(The American Society of Mechanical Engineers (ASME), 2018)We propose a novel modeling, estimation, and control framework for homogeneous charge compression ignition (HCCI) engines, which, by utilizing direct in-cylinder pressure sensing, can detect, and react to, the wide spectrum ... -
Design, Development, and Evaluation of a Control Framework for an Atkinson Cycle Engine
(The American Society of Mechanical Engineers (ASME), 2018)The efficiency of the spark ignition (SI) engine degrades while working at part loads. It can be optimally dealt with a slightly different thermodynamic cycle termed as an Atkinson cycle. It can be implemented in the ... -
Hybrid State Space Modeling of a Spark Ignition Engine for Online Fault Diagnosis
(The American Society of Mechanical Engineers (ASME), 2018)In this work, a nonlinear hybrid state space model of a complete spark ignition (SI) gasoline engine system from throttle to muffler is developed using the mass and energy balance equations. It provides within-cycle dynamics ... -
Comparison of Adaptive Fuzzy Sliding-Mode Pulse Width Modulation Control With Common Model-Based Nonlinear Controllers for Slip Control in Antilock Braking Systems
(The American Society of Mechanical Engineers (ASME), 2018)A novel application of the adaptive fuzzy sliding-mode control (AFSMC) to the case of an antilock braking system (ABS) is proposed in this paper. ABS is a system in vehicles that allows the wheels to maintain tractive ... -
High-Thrust Aerostatic Bearing Design Through Transient Perturbation Modeling With Numerical Validation
(The American Society of Mechanical Engineers (ASME), 2018)A simple perturbation flow model is formulated and validated by a rigorous computational fluid dynamics (CFD) study for designing a counterbalanced vertical-axis aerostatic thrust bearing. The flow model of the orifice at ... -
Design and Simulation of Three Degrees-of-Freedom Tracking Systems for Capsule Endoscope
(The American Society of Mechanical Engineers (ASME), 2018)Copper-based surface composite dispersed with varying fractions of hybrid reinforcement was fabricated through friction stir processing (FSP). Hybrid reinforcement particles were prepared from aluminum nitride (AIN) and ... -
A Control-Oriented Framework for Direct Impulse-Based Rendering of Haptic Contacts
(The American Society of Mechanical Engineers (ASME), 2018)In many haptic applications, producing a sharp feeling of impact is crucial for high-fidelity force feedback rendering of virtual objects (VOs). Although suitable for rendering collision-rich haptic interactions, impulse-based ... -
Estimation of Intake Oxygen Concentration Using a Dynamic Correction State With Extended Kalman Filter for Light-Duty Diesel Engines
(The American Society of Mechanical Engineers (ASME), 2018)An accurate estimation of the intake oxygen concentration (IOC) is a prerequisite to develop the optimal control strategy because it directly affects the combustion and emissions. Since the IOC is determined based on the ...