Now showing items 841-860 of 5605

    • An Adaptive Economic Model Predictive Control Approach for Wind Turbines 

      Shaltout, Mohamed L.; Ma, Zheren; Chen, Dongmei (The American Society of Mechanical Engineers (ASME), 2018)
      Motivated by the reduction of overall wind power cost, considerable research effort has been focused on enhancing both efficiency and reliability of wind turbines. Maximizing wind energy capture while mitigating fatigue ...
    • Improved Results on Finite-Time Stability Analysis of Neural Networks With Time-Varying Delays 

      Saravanan, S.; Syed Ali, M. (The American Society of Mechanical Engineers (ASME), 2018)
      This paper investigates the issue of finite time stability analysis of time-delayed neural networks by introducing a new Lyapunov functional which uses the information on the delay sufficiently and an augmented Lyapunov ...
    • Heterogeneous Nonlinear Systems Synchronization Based on Adaptive Super Twisting 

      Salas-Peña, Oscar; De León-Morales, Jesús (The American Society of Mechanical Engineers (ASME), 2018)
      In this work, the synchronization of a group of heterogeneous uncertain nonlinear systems is addressed. A strategy based on adaptive super twisting algorithm is proposed, in order to synchronize the outputs of the heterogeneous ...
    • Control of Droplet Detachment Frequency in a GMAW Process by a Hybrid Model Predictive Control 

      Sartipizadeh, Hossein; Haeri, Mohammad (The American Society of Mechanical Engineers (ASME), 2018)
      Efficient control of a gas metal arc welding (GMAW) process enables one to obtain high quality products as a consequence of achieving a high quality weld. Although control of the droplet detachment frequency in the welding ...
    • A Hierarchical Route Guidance Framework for Off-Road Connected Vehicles 

      Roy, Judhajit; Wan, Nianfeng; Goswami, Angshuman; Vahidi, Ardalan; Jayakumar, Paramsothy; Zhang, Chen (The American Society of Mechanical Engineers (ASME), 2018)
      A new framework for route guidance, as part of a path decision support tool, for off-road driving scenarios is presented in this paper. The algorithm accesses information gathered prior to and during a mission which are ...
    • Design and Analysis for Uncertain Repetitive Control Systems With Unknown Disturbances 

      Sakthivel, R.; Raajananthini, K.; Selvaraj, P.; Ren, Y. (The American Society of Mechanical Engineers (ASME), 2018)
      In this paper, the periodic tracking problem is considered for a class of continuous system with uncertainty, time-varying delay, and unknown bounded external disturbances. To be precise, in order to attenuate the unknown ...
    • Electrical Contact Resistance Estimation With Application to Electric Vehicle Charging Cable 

      Sabatier, Jocelyn; Chevrié, Mathieu; Farges, Christophe; Guillemard, Franck; Pradere, Laetitia (The American Society of Mechanical Engineers (ASME), 2018)
      The paper proposes a method to estimate the contact resistance inside the outlet between a charging cable and an electric vehicle. First, an electrothermal model of some components close to the contact area inside the ...
    • A Backlash Compensator for Drivability Improvement Via Real-Time Model Predictive Control 

      Rostiti, Cristian; Liu, Yuxing; Canova, Marcello; Stockar, Stephanie; Chen, Gang; Dourra, Hussein; Prucka, Michael (The American Society of Mechanical Engineers (ASME), 2018)
      Nonlinear dynamics in the transmission and drive shafts of automotive powertrains, such as backlash, induce significant torque fluctuations at the wheels during tip-in and tip-out transients, deteriorating drivability. ...
    • Redundant MEMS-Based Inertial Navigation Using Nonlinear Observers 

      Rogne, Robert. H.; Bryne, Torleiv. H.; Fossen, Thor. I.; Johansen, Tor. A. (The American Society of Mechanical Engineers (ASME), 2018)
      We present two alternative methods for fault detection and isolation (FDI) with redundant Microelectromechanical system (MEMS) inertial measurement units (IMUs) in inertial navigation systems (INS) based on nonlinear ...
    • Optimal Design of Single-Mode Power-Split Hybrid Tracked Vehicles 

      Qin, Zhaobo; Luo, Yugong; Li, Keqiang; Peng, Huei (The American Society of Mechanical Engineers (ASME), 2018)
      Hybrid tracked vehicles are common in construction, agriculture, and military applications. Most use a series hybrid powertrain with large motors and operate at a relatively low efficiency. Although some researchers have ...
    • Dynamics of Flywheel Energy Storage System With Permanent Magnetic Bearing and Spiral Groove Bearing 

      Qiu, Yujiang; Jiang, Shuyun (The American Society of Mechanical Engineers (ASME), 2018)
      Developing a flywheel energy storage system (FESS) with permanent magnetic bearing (PMB) and spiral groove bearing (SGB) brings a great challenge to dynamic control for the rotor system. In this paper, a pendulum-tuned ...
    • Optimal Efficiency-Power Tradeoff for an Air Compressor/Expander 

      Rice, Andrew T.; Li, Perry Y.; Sanckens, Caleb J. (The American Society of Mechanical Engineers (ASME), 2018)
      An efficient and power dense high pressure air compressor/expander (C/E) is critical for the success of a compressed air energy storage (CAES) system. There is a tradeoff between efficiency and power density that is mediated ...
    • Loss of Optimal Performance of the Finite-Horizon Continuous-Time Linear-Quadratic Controller Driven by a Reduced-Order Observer 

      Radisavljevic-Gajic, Verica; Milanovic, Milos (The American Society of Mechanical Engineers (ASME), 2018)
      In this paper, we derive an expression for the loss of optimal performance (compared to the corresponding linear-quadratic optimal performance with the instantaneous full-state feedback) when the continuous-time finite-horizon ...
    • A Note on Observer-Based Frequency Control for a Class of Systems Described by Uncertain Models 

      Popescu, Nirvana; Ivanescu, Mircea; Popescu, Decebal (The American Society of Mechanical Engineers (ASME), 2018)
      This paper focuses on the robust control problem for a class of linear uncertain systems by using frequency techniques. The controller/observer dynamics are analyzed using Lyapunov techniques, in terms of the state and ...
    • Development of Hierarchical Control Logic for Two-Channel Hydraulic Active Roll Control System 

      Pi, Dawei; Wang, Xianhui; Wang, Hongliang; Kong, Zhenxing (The American Society of Mechanical Engineers (ASME), 2018)
      In this paper, a hierarchical control logic for two-channel hydraulic active roll control (ARC) system, which includes vehicle level control and actuator level control is proposed. Vehicle level control consists of antiroll ...
    • Simple Input Disturbance Observer-Based Control: Case Studies 

      Polóni, Tomáš; Kolmanovsky, Ilya; Rohaľ-Ilkiv, Boris (The American Society of Mechanical Engineers (ASME), 2018)
      In this paper, the application of an input disturbance observer (IDO)-based control, based on a simple input observer previously proposed and used for engine control, is demonstrated in two case studies. The first case ...
    • State-Space Model and Kalman Filter Gain Identification by a Kalman Filter of a Kalman Filter 

      Phan, Minh Q.; Vicario, Francesco; Longman, Richard W.; Betti, Raimondo (The American Society of Mechanical Engineers (ASME), 2018)
      This paper describes an algorithm that identifies a state-space model and an associated steady-state Kalman filter gain from noise-corrupted input–output data. The model structure involves two Kalman filters where a second ...
    • Some Kinds of the Controllable Problems for Fuzzy Control Dynamic Systems 

      Phu, N. D.; Tri, P. V.; Ahmadian, A.; Salahshour, S.; Baleanu, D. (The American Society of Mechanical Engineers (ASME), 2018)
      In this work, we have discussed the fuzzy solutions for fuzzy controllable problem, fuzzy feedback problem, and fuzzy global controllable (GC) problems. We use the method of successive approximations under the generalized ...
    • Backstepping Sliding Mode Gaussian Insulin Injection Control for Blood Glucose Regulation in Type I Diabetes Patient 

      Patra, Akshaya Kumar; Rout, Pravat Kumar (The American Society of Mechanical Engineers (ASME), 2018)
      New efforts have been made to build up prototypes of subcutaneous closed-loop systems for controlling blood glucose (BG) levels in type I diabetes mellitus (TIDM) patients with the development of clinically accurate ...
    • Convergence Properties of the Kalman Inverse Filter 

      Petschel, B. S.; Soltani Naveh, K.; McAree, P. R. (The American Society of Mechanical Engineers (ASME), 2018)
      The Kalman filter has a long history of use in input deconvolution where it is desired to estimate structured inputs or disturbances to a plant from noisy output measurements. However, little attention has been given to ...