Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 761-780 of 5605
-
Fault Detection and Isolation for Complex Thermal Management Systems
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents a fault detection and isolation (FDI) approach for actuator faults of complex thermal management systems. In the case of safety critical systems, early fault diagnosis not only improves system reliability, ... -
Backlash Identification in Two-Mass Systems by Delayed Relay Feedback
(The American Society of Mechanical Engineers (ASME), 2019)Backlash, also known as mechanical play, is a piecewise differentiable nonlinearity which exists in several actuated systems, comprising, e.g., rack-and-pinion drives, shaft couplings, toothed gears, and other machine ... -
In-Plane Flexible Beam on Elastic Foundation With Combined Sidewall Stiffness Tire Model for Heavy-Loaded Off-Road Tire
(The American Society of Mechanical Engineers (ASME), 2019)Combining the flexible carcass beam and the radial sidewall element, flexible beam on elastic foundation with combined sidewall stiffness tire model is proposed for heavy-loaded off-road tire with a large section ratio. ... -
Large and Infinite Mass–Spring–Damper Networks
(The American Society of Mechanical Engineers (ASME), 2019)This paper introduces mechanical networks as a tool for modeling complex unidirectional vibrations. Networks of this type have branches containing massless linear springs and dampers, with masses at the nodes. Tree and ... -
Distributed Observer Type Protocol for Flocking of Linear Second-Order Multi-Agent Systems Subject to External Disturbance
(The American Society of Mechanical Engineers (ASME), 2019)This paper studies the leader–follower flocking of multi-agent systems for the linear second-order dynamics, subject to the external disturbance problem. It is assumed that the dynamic of the leader is Lipschitz-type. Also, ... -
In-Wheel-Motor-Driven Electric Vehicles Motion Control Methods Considering Motor Thermal Protection
(The American Society of Mechanical Engineers (ASME), 2019)Thermal protection strategies are employed to protect in-wheel-motors (IWM). Vehicle motions and stability can be affected by such motor thermal protections because they typically reduce the motor output torque to lower ... -
Decentralized Trajectory Tracking Control for Modular and Reconfigurable Robots With Torque Sensor: Adaptive Terminal Sliding Control-Based Approach
(The American Society of Mechanical Engineers (ASME), 2019)The main technical challenge in decentralized control of modular and reconfigurable robots (MRRs) with torque sensor is related to the treatment of interconnection term and friction term. This paper proposed a modified ... -
Nonfragile H∞ Control of Delayed Active Suspension Systems in Finite Frequency Under Nonstationary Running
(The American Society of Mechanical Engineers (ASME), 2019)The vehicle active suspension has drawn considerable attention due to its superiority in improving the vehicle dynamic performance. This paper investigates the nonfragile H∞ control of delayed vehicle active suspension in ... -
Tracking Fault Tolerant Control for Hybrid System: Two-Link Human Arm Application
(The American Society of Mechanical Engineers (ASME), 2019)This paper proposes a novel fault tolerant control (FTC) scheme for a class of hybrid dynamical system (HDS) subject to sensor faults. The corresponding FTC architecture is designed around a reconfiguration mechanism. It ... -
Improved Internal Model Control-Proportional-Integral- Derivative Fractional-Order Multiloop Controller Design for Non Integer Order Multivariable Systems
(The American Society of Mechanical Engineers (ASME), 2019)This paper is aimed to propose a multiloop control scheme for fractional order multi-input multi-output (FO-MIMO) systems. It is an extension of the FO-multiloop controller design method developed for integer order ... -
A Control Design Approach for TITO Systems Using Measured Data
(The American Society of Mechanical Engineers (ASME), 2019)This paper deals with the design of fixed-structure controllers for two-input two-output (TITO) systems using frequency-domain data. In standard control approaches, a plant model is first derived, then a suitable controller ... -
Nonlinear Control of Turbofan Engines: An Active Set-Based Method for Performance Optimization
(The American Society of Mechanical Engineers (ASME), 2019)The inherent nonlinear nature of engine dynamics necessitates advanced design techniques for transient control. Conventional design methodologies are either not ready to apply to large flight envelope control or failing ... -
Controlling Fluctuated Chaotic Power Systems With Compensation of Input Saturation: Application to Electric Direct Current Machines
(The American Society of Mechanical Engineers (ASME), 2019)It is shown that brushless direct current (DC) motors (BLDCMs), which have found many useful applications in motion control areas, display chaotic behaviors. To avoid undesirable inherent oscillations of such DC motors, a ... -
Extremum Seeking for Plants With a Time-Varying Disturbance: Application to Photovoltaic Maximum Power Point Tracking
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents an extremum seeking controller for photovoltaic maximum power point tracking (MPPT). The controller belongs to the broad family of “perturb and observe” algorithms, where the terminal voltage of a ... -
Borehole Propagation With Undergaged Stabilizers: Theory and Validation
(The American Society of Mechanical Engineers (ASME), 2019)This paper discusses borehole propagation modeling in the drilling industry. A three-dimensional (3D) borehole propagation model is proposed that tracks the wellbore/stabilizer contacts caused by an overgaged borehole. The ... -
Pole Placement for Time-Delayed Systems Using Galerkin Approximations
(The American Society of Mechanical Engineers (ASME), 2019)Many dynamic systems of practical interest have inherent time delays and thus are governed by delay differential equations (DDEs). Because DDEs are infinite dimensional, time-delayed systems may be difficult to stabilize ... -
An Extended Jacobian-Based Formulation for Operational Space Control of Kinematically Redundant Robot Manipulators With Multiple Subtask Objectives: An Adaptive Control Approach
(The American Society of Mechanical Engineers (ASME), 2019)In this study, an extended Jacobian matrix formulation is proposed for the operational space tracking control of kinematically redundant robot manipulators with multiple subtask objectives. Furthermore, to compensate the ... -
Analytical Structures of Takagi-Sugeno Fuzzy Two-Input Two-Output Proportional-Integral/Proportional-Derivative Controllers With Multiple Fuzzy Sets
(The American Society of Mechanical Engineers (ASME), 2019)In this paper, an attempt is made to generalize the analytical structures of Takagi-Sugeno (TS) fuzzy two-input two-output (TITO) proportional-integral (PI)/proportional-derivative (PD) controllers using multiple input ... -
Multiphase Scouting Control of an Agricultural Field Robot With Reachability Analyses
(The American Society of Mechanical Engineers (ASME), 2019)Accurate path scouting control of an autonomous agricultural robot is substantially influenced by terrain variability, field patterns, and uncertainties in sensed information. Based on conventional farming techniques, the ... -
Stabilization of Continuous-Time Fractional Positive Systems With Delays and Asymmetric Control Bounds
(The American Society of Mechanical Engineers (ASME), 2019)Continuous-time fractional linear systems with delays, asymmetrical bounds on control and non-negative states are considered. Hence, the stabilization problem is studied and solved. A direct Lyapunov–Krasovskii function ...