Now showing items 3381-3400 of 5605

    • A Linearized Electrohydraulic Servovalve Model for Valve Dynamics Sensitivity Analysis and Control System Design 

      Dean H. Kim; Tsu-Chin Tsao (The American Society of Mechanical Engineers (ASME), 2000)
      This paper presents the derivation of a linearized model for flapper-nozzle type two-stage electrohydraulic servovalves from the nonlinear state equations. The coefficients of the linearized model ...
    • Editorial 

      Eduardo A. Misawa; Vadim Utkin (The American Society of Mechanical Engineers (ASME), 2000)
      This December 2000 issue of the ASME Journal of Dynamic Systems, Measurement, and Control is focused on the topic of Variable Structure Systems (VSS), as described in the Editorial. I would ...
    • Adaptive Control With Asymptotic Tracking Performance and Its Application to an Electro-Hydraulic Servo System 

      Zongxuan Sun; Tsu-Chin Tsao (The American Society of Mechanical Engineers (ASME), 2000)
      This paper presents a discrete-time adaptive controller, which incorporates internal model principle for asymptotic tracking performance of systems with parametric uncertainties, unmodeled dynamics ...
    • Instantaneous Flow Rate Measurement of Ideal Gases 

      Kenji Kawashima; Research Associate; Toshiharu Kagawa; Toshinori Fujita; Research Associate (The American Society of Mechanical Engineers (ASME), 2000)
      In this paper, a chamber called an “Isothermal Chamber” was developed. The isothermal chamber can almost realize isothermal condition due to larger heat transfer area and heat transfer coefficient ...
    • Position Control of a Cylinder Using a Hydraulic Bridge Circuit With ER Valves 

      Seung-Bok Choi; Woo-Yeon Choi (The American Society of Mechanical Engineers (ASME), 2000)
      This paper presents the position control of a double-rod cylinder system using a hydraulic bridge circuit with four electro-rheological (ER) valves. After synthesizing a silicone oil-based ER ...
    • Fluid Transmission Line Modeling Using a Variational Method 

      Jari Mäkinen; Researcher; Robert Piché; Asko Ellman (The American Society of Mechanical Engineers (ASME), 2000)
      A variational method is used to derive numerical models for transient flow simulation in fluid transmission lines. These are generalizations of models derived using the more traditional modal ...
    • Experimental Identification of Dynamic Parameters of Rolling Element Bearings in Machine Tools 

      D. M. Shamine; S. W. Hong; Y. C. Shin (The American Society of Mechanical Engineers (ASME), 2000)
      In-situ identification is essential for estimating bearing joint parameters involved in spindle systems because of the inherent interaction between the bearings and spindle. This paper presents ...
    • Control of Camless Intake Process—Part II1 

      M.-S. S. Ashhab; J. A. Cook; M. B. Levin; A. G. Stefanopoulou (The American Society of Mechanical Engineers (ASME), 2000)
      A model-based control scheme is designed to regulate the cylinder air charge of a camless multicylinder engine for unthrottled operation. The controller consists of a feedforward and an adaptive ...
    • Nonlinearity and Feedback Compensation Method in a Pneumatic Vibration Generator 

      B. Kuźniewski (The American Society of Mechanical Engineers (ASME), 2000)
      The paper presents a model of a pneumatic piston unit and analyzes dynamic processes taking place in the unit generating periodic signals. Nonlinearities and feedback occurring in flow and ...
    • Robust Stabilization of Large Amplitude Ship Rolling in Beam Seas 

      Shyh-Leh Chen; Steven W. Shaw; Fellow ASME and Professor; Hassan K. Khalil; Armin W. Troesch (The American Society of Mechanical Engineers (ASME), 2000)
      The dynamics and control of a strongly nonlinear 3-DOF model for ship motion are investigated. The model describes the roll, sway, and heave motions occurring in a vertical plane when the ...
    • Theoretical and Experimental Investigations of an Opto-Pneumatic Detector 

      G. Belforte; T. Raparelli; V. Viktorov; G. Eula; A. Ivanov (The American Society of Mechanical Engineers (ASME), 2000)
      The following is a theoretical and experimental study of an opto-pneumatic detector (OPD) used in an opto-pneumatic interface. This interface is capable of changing an optical signal into a ...
    • Modeling and Identification of Lubricated Polymer Friction Dynamics 

      Geesern Hsu; Andrew E. Yagle; Kenneth C. Ludema; Joel A. Levitt (The American Society of Mechanical Engineers (ASME), 2000)
      A systematic approach is proposed to model the dynamics of lubricated polymer friction. It starts with the development of a physical model to describe the fundamental mechanisms of the friction. ...
    • Control-Oriented Model for Camless Intake Process—Part I1 

      M.-S. S. Ashhab; J. A. Cook; M. B. Levin; A. G. Stefanopoulou (The American Society of Mechanical Engineers (ASME), 2000)
      The improvement of internal combustion engine is largely accomplished though the introduction of innovative actuators that allow optimization and control of the flow, mixing, and combustion ...
    • Fractal Estimation of Flank Wear in Turning 

      Satish T. S. Bukkapatnam; Assistant Professor of Industrial and Systems Engineering; Soundar R. T. Kumara; Professor of Industrial and Manufacturing Engineering; Akhlesh Lakhtakia; Professor of Engineering Science and Mechanics (The American Society of Mechanical Engineers (ASME), 2000)
      A novel fractal estimation methodology, that uses—for the first time in metal cutting literature—fractal properties of machining dynamics for online estimation of cutting tool flank wear, is ...
    • Error Analysis of the Cylindrical Capacitive Sensor for Active Magnetic Bearing Spindles 

      Hyeong-Joon Ahn; Soo Jeon; Dong-Chul Han (The American Society of Mechanical Engineers (ASME), 2000)
      This paper discusses the effects of mechanical errors of the cylindrical capcitive sensor (CCS) for active magnetic bearing (AMB) spindles, including the roundness error of a rotor and the ...
    • A Sliding Mode Control of a Full-Car Electrorheological Suspension System Via Hardware in-the-Loop Simulation 

      S. B. Choi; Y. T. Choi; D. W. Park (The American Society of Mechanical Engineers (ASME), 2000)
      This paper presents a feedback control performance of a full-car suspension system featuring electrorheological (ER) dampers for a passenger vehicle. A cylindrical ER damper is designed and ...
    • Control of Deep-Hysteresis Aeroengine Compressors1 

      Hsin-Hsiung Wang; Miroslav Krstić; Michael Larsen (The American Society of Mechanical Engineers (ASME), 2000)
      Frequencies of higher-order modes of fluid dynamic phenomena participating in aeroengine compressor instabilities far exceed the bandwidth of available (affordable) actuators. For this reason, most ...
    • Disturbance Rejection With Simultaneous Input-Output Linearization and Decoupling Via Restricted State Feedback 

      A. S. Tsirikos; K. G. Arvanitis (The American Society of Mechanical Engineers (ASME), 2000)
      The disturbance rejection with simultaneous input-output linearization and decoupling problem of nonsquare nonlinear systems via restricted state feedback is investigated in this paper. The problem ...
    • Modeling a Pneumatic Turbine Speed Control System 

      Eric R. Upchurch; Hung V. Vu (The American Society of Mechanical Engineers (ASME), 2000)
      This paper presents a mathematical model of a pneumatic turbine and its pneumatically energized speed control system. The turbine and speed control drive an auxiliary hydraulic pump used on ...
    • A Simplified Cartesian-Computed Torque Controller for Highly Geared Systems and Its Application to an Experimental Climbing Robot 

      David Bevly; Constantinos Mavroidis; Steven Dubowsky (The American Society of Mechanical Engineers (ASME), 2000)
      A simplified Cartesian computed torque (SCCT) control scheme and its application to an experimental climbing robot named LIBRA is presented. SCCT control is developed exploiting some of the ...