Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 3021-3040 of 5605
-
Control of Macro-Micro Manipulators Revisited
(The American Society of Mechanical Engineers (ASME), 2005)A full-pose, position and orientation, trajectory-tracking control of kinematically redundant flexible-macro-rigid-micro manipulators is proposed. Redundancy is resolved such that the forces exciting ... -
Sliding-Mode Observer as a Time-Variant Estimator for Control of Pneumatic Systems
(The American Society of Mechanical Engineers (ASME), 2005)The force and position of pneumatic actuators are difficult to control, since their nonlinear model includes unknown variables such as temperature and the discharge coefficient. This paper presents ... -
Natural Observer Design for Singularly Perturbed Vector Second-Order Systems
(The American Society of Mechanical Engineers (ASME), 2005)Our aim in the present research study is to develop a systematic natural observer design framework for vector second-order systems in the presence of time-scale multiplicity. Specifically, vector ... -
Robust Decentralized Adaptive Control for Interconnected Systems With Time Delays
(The American Society of Mechanical Engineers (ASME), 2005)The problem of robust stabilization for a class of time-varying nonlinear large-scale systems subject to multiple time-varying delays in the interconnections is considered. The interconnections ... -
Generalized Multivariable Gain Scheduling With Robust Stability Analysis
(The American Society of Mechanical Engineers (ASME), 2005)In this work we introduce a methodology for the design of multivariable gain-scheduled controllers for nonlinear systems and an approach for determining the local stability of a nonlinear closed ... -
Multi-Sensor Information Fusion Kalman Filter Weighted by Scalars for Systems with Colored Measurement Noises
(The American Society of Mechanical Engineers (ASME), 2005)An optimal information fusion criterion weighted by scalars is presented in the linear minimum variance sense. Based on this fusion criterion, a scalar weighting information fusion decentralized ... -
Modal Approximation of Distributed Dynamics for a Hydraulic Transmission Line With Pressure Input-Flow Rate Output Causality
(The American Society of Mechanical Engineers (ASME), 2005)Based on analytical results obtained in the frequency domain, modal approximation techniques are employed to derive transfer function and state space models applicable to a pressure input-flow ... -
On the Minimum Phase Property of Mass-Dashpot-Spring Sampled Systems
(The American Society of Mechanical Engineers (ASME), 2005)In literature, it is shown by Åström et al. that a sampled system may become nonminimum phase for sufficiently fast sampling, even though the continuous-time system is minimum phase. ... -
The Motion of a Compliantly Suspended Rigid Body Constrained by Multipoint Frictional Contact
(The American Society of Mechanical Engineers (ASME), 2005)This paper addresses methods for determining the motion of an elastically suspended rigid body in frictional contact at multiple distinct locations. The methods developed assume that: (1) The ... -
Power Scaling Bond Graph Approach to the Passification of Mechatronic Systems— with Application to Electrohydraulic Valves
(The American Society of Mechanical Engineers (ASME), 2005)In many applications that require physical interaction with humans or other physical environments, passivity is a useful property to have in order to improve safety and ease of use. Many ... -
Impedance Control of Space Robots Using Passive Degrees of Freedom in Controller Domain
(The American Society of Mechanical Engineers (ASME), 2005)Impedance control is an efficient and stable method of providing trajectory and force control in robotic systems. The procedure by which the impedance of the manipulator is changed is a very ... -
Control of Flexible Structures Governed by the Wave Equation Using Infinite Dimensional Transfer Functions
(The American Society of Mechanical Engineers (ASME), 2005)A method of noncollocated controller design for flexible structures, governed by the wave equation, is proposed. First an exact, infinite dimension, transfer function is derived and its properties ... -
Actuation and Control Strategies for Miniature Robotic Surgical Systems
(The American Society of Mechanical Engineers (ASME), 2005)During the past 20years, tremendous advancements have been made in the fields of minimally invasive surgery (MIS) and minimally invasive, robotically assisted (MIRA) cardiac surgery. Benefits from ... -
Constrained Control Design for Magnetic Bearing Systems
(The American Society of Mechanical Engineers (ASME), 2005)We study control problems in magnetic bearing systems that are subject to both input and state constraints. Apart from the usual restrictions on voltages and currents in the circuit systems, ... -
Path Tracking of Parallel Manipulators in the Presence of Force Singularity
(The American Society of Mechanical Engineers (ASME), 2005)Parallel manipulators are uncontrollable at force singularities due to the infeasibly high actuator forces required. Existing remedies include the application of actuation redundancy and motion ... -
Hamilton’s Equations for Impact Simulations With Perforation and Fragmentation
(The American Society of Mechanical Engineers (ASME), 2005)Conventional models of high velocity impact dynamics rely on approximate solutions of the governing partial differential equations for an elastic-plastic continuum, developed using weighted residual, ... -
Recursive Kinematics and Inverse Dynamics for a Planar 3R Parallel Manipulator
(The American Society of Mechanical Engineers (ASME), 2005)We focus on the development of modular and recursive formulations for the inverse dynamics of parallel architecture manipulators in this paper. The modular formulation of mathematical models is ... -
Identification of the Twin Independent Variable Cam Timing Engines for AFR Control
(The American Society of Mechanical Engineers (ASME), 2005)A control-oriented air-fuel ratio path model is developed to represent a spark-ignited, port-fuel-injected, twin-independent variable cam timing engine. Following a recent publication [, SAE ... -
Modeling and Multivariable Control Design Methodologies for Hexapod-Based Satellite Vibration Isolation
(The American Society of Mechanical Engineers (ASME), 2005)A mathematical model of a six-degree-of-freedom (6-DOF) hexapod system for vibration isolation was derived in the discrete-time domain on the basis of the experimental data obtained from a ... -
Transformations of Nonlinear Systems to High-Order Generalized Chained Forms
(The American Society of Mechanical Engineers (ASME), 2005)A variety of stabilization methods for nonlinear systems in chained form can be found in the literature. However, very few results exist in the area of systematically converting a general ...