Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 3001-3020 of 5605
-
Robust Control for Uncertain Takagi–Sugeno Fuzzy Systems with Time-Varying Input Delay
(The American Society of Mechanical Engineers (ASME), 2005)A control problem of Takagi–Sugeno fuzzy systems with a time-varying input delay and norm-bounded uncertainties is addressed. The input delay is well-known in making the closed-loop stabilization ... -
Model Reduction of Large-Scale Discrete Plants With Specified Frequency Domain Balanced Structure
(The American Society of Mechanical Engineers (ASME), 2005)A new model reduction technique for linear time-invariant systems is proposed. A new method that reduces the order of large-scale systems by integrating singular perturbation with specified ... -
Using Steady Flow Force for Unstable Valve Design: Modeling and Experiments
(The American Society of Mechanical Engineers (ASME), 2005)In single stage electrohydraulic valves, solenoid actuators are usually used to stroke the main spools directly. They are cheaper and more reliable than multistage valves. Their use, however, ... -
Development of a Friction Component Model for Automotive Powertrain System Analysis and Shift Controller Design based on Parallel-Modulated Neural Networks
(The American Society of Mechanical Engineers (ASME), 2005)In this study, a new hybrid-neural-network-based friction component model is developed for powertrain (PT) dynamic analysis and controller design. This new model, with significantly improved ... -
A Mean-Value Model for Control of Homogeneous Charge Compression Ignition (HCCI) Engines
(The American Society of Mechanical Engineers (ASME), 2005)A Mean Value Model (MVM) for a Homogeneous Charge Compression Ignition (HCCI) engine is presented. Using a phenomenological zero-dimensional approach with five continuous and three discrete states ... -
Rollover Warning for Articulated Heavy Vehicles Based on a Time-to-Rollover Metric
(The American Society of Mechanical Engineers (ASME), 2005)A Time-To-Rollover (TTR) metric is proposed as the basis to assess rollover threat for an articulated heavy vehicle. The TTR metric accurately “counts-down” toward rollover regardless of vehicle ... -
Modeling and Control of a Wheel Loader With a Human-in-the-Loop Assessment Using Virtual Reality
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents dynamic modeling, controller design, and virtual reality (VR)-based human-in-the-loop real-time simulation for a wheel loader control system. In particular, a loader with ... -
Nanoscale Motion Control With a Compact Minimum-Actuator Magnetic Levitator
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents a novel magnetically levitated (maglev) stage developed to meet the ever-increasing precise positioning requirements in nanotechnology. This magnetic levitator has 6 independent ... -
Control of an Electrostatic Microelectromechanical System Using Static and Dynamic Output Feedback
(The American Society of Mechanical Engineers (ASME), 2005)This paper examines control strategies for electrostatically actuated microelectromechanical systems (MEMS), with the goals of using feasible measurements to eliminate the pull-in bifurcation, robustly ... -
A Thermodynamic Model of Membrane Humidifiers for PEM Fuel Cell Humidification Control
(The American Society of Mechanical Engineers (ASME), 2005)Maintaining proper membrane humidity is crucial to ensure optimal operation of a polymer electrolyte membrane fuel cell system. A membrane humidifier using the fuel cell exhaust gas to humidify ... -
Dynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation
(The American Society of Mechanical Engineers (ASME), 2005)One practical method for achieving homogeneous charge compression ignition (HCCI) in internal combustion engines is to modulate the valves to trap or reinduct exhaust gases, increasing the energy ... -
Control of Charge Dilution in Turbocharged Diesel Engines via Exhaust Valve Timing
(The American Society of Mechanical Engineers (ASME), 2005)In this paper we extend an existing crank angle resolved dynamic nonlinear model of a six-cylinder 12 l turbocharged (TC) Diesel engine with exhaust valve closing (EVC) variability. Early EVC ... -
Robust Adaptive Control Scheme for Discrete-Time System With Actuator Failures
(The American Society of Mechanical Engineers (ASME), 2005)Actuators may fail during system operation, and actuator failures are often uncertain in the sense that it is not known when, how much, and how many actuators fail. One typical actuator failure ... -
Disk Wobble Control in Optical Disk Drives
(The American Society of Mechanical Engineers (ASME), 2005)Focusing errors in optical disk drives comprise significant periodic components and an eventful dc content. The dc component is not explicitly taken into account in many periodic compensation ... -
Modal Simulation and Testing of a Micro-Manipulator
(The American Society of Mechanical Engineers (ASME), 2005)A micro-machined manipulator with three kinematic degrees-of-freedom (DOF): x, y, and φ is presented. The manipulator is driven by three thermal actuators. A six DOF discrete spring-mass model ... -
Experimental Analysis of Cracked Rotor
(The American Society of Mechanical Engineers (ASME), 2005)The dynamic behavior of a cracked rotor has been theoretically analyzed by many researchers. In this paper, an experimental confirmation of the theoretical results is sought, especially for the ... -
Application of Constrained H∞ Control to Active Suspension Systems on Half-Car Models
(The American Society of Mechanical Engineers (ASME), 2005)This paper formulates the active suspension control problem as disturbance attenuation problem with output and control constraints. The H∞ performance is used to measure ride comfort such that ... -
Compliance Control for an Anthropomorphic Robot with Elastic Joints: Theory and Experiments
(The American Society of Mechanical Engineers (ASME), 2005)Studies on motion control of robot manipulators with elastic joints are basically aimed at improving robot performance in tracking or regulation tasks. In the interaction between robots and ... -
Concurrent Design of Vibration Absorbers and Input Shapers
(The American Society of Mechanical Engineers (ASME), 2005)Systems with flexible dynamics often vibrate due to external disturbances, as well as from changes in the reference command. Feedback control is an obvious choice to deal with these vibrations, ... -
Controller Design for Flexible Systems With Friction: Pulse Amplitude Control
(The American Society of Mechanical Engineers (ASME), 2005)Accounting for friction is important when designing controllers for precision motion control systems. However, the presence of the friction and the flexibility in the system yields undesirable ...