Journal of Heat Transfer: Recent submissions
Now showing items 3521-3540 of 3611
-
Stable/Unstable Stratification in Thermosolutal Convection in a Square Cavity
(The American Society of Mechanical Engineers (ASME), 2008)A numerical study is made of double-diffusive convection in a square cavity with a sliding top lid in the presence of combined vertical temperature and concentration gradients. The bottom lid ... -
Natural Convection Heat Transfer Enhancements From a Cylinder Using Porous Carbon Foam: Experimental Study
(The American Society of Mechanical Engineers (ASME), 2008)The main objective of this experimental study is to quantify and compare the heat transfer enhancement of carbon foam and aluminum fins in natural convection. The study measures steady state ... -
Effect of Nonuniform Stack Compression on Proton Exchange Membrane Fuel Cell Temperature Distributions
(The American Society of Mechanical Engineers (ASME), 2008)A three-dimensional model is used to predict the power output and internal temperature distribution of a small proton exchange membrane fuel cell stack. Of particular interest is the influence ... -
Time-Resolved Micro-Raman Thermometry for Microsystems in Motion
(The American Society of Mechanical Engineers (ASME), 2008)Micro-Raman thermometry has been demonstrated to be a feasible technique for obtaining surface temperatures with micron-scale spatial resolution for microelectronic and microelectromechanical systems ... -
Ab Initio Molecular Dynamics Study of Nanoscale Thermal Energy Transport
(The American Society of Mechanical Engineers (ASME), 2008)Ab initio molecular dynamics, which employs density functional theory, is used to study thermal energy transport phenomena in nanoscale structures. Thermal equilibration in multiple thin layer ... -
Estimating the Wall Heat Flux of Unsteady Conjugated Forced Convection Between Two Corotating Disks Using an Inverse Solution Scheme
(The American Society of Mechanical Engineers (ASME), 2008)An inverse solution scheme based on the conjugate gradient method with the minimization of the object function is presented for estimating the unknown wall heat flux of conjugated forced ... -
Investigation of Heat Transfer and Pressure Drop of an Impinging Jet in a Cross-Flow for Cooling of a Heated Cube
(The American Society of Mechanical Engineers (ASME), 2008)The objective of this study is to investigate the thermal performance and the cost measured in pressure drops of a targeted cooling system with use of an impinging jet in combination with a ... -
Computational Analysis of Surface Curvature Effect on Mist Film-Cooling Performance
(The American Society of Mechanical Engineers (ASME), 2008)Air-film cooling has been widely employed to cool gas turbine hot components, such as combustor liners, combustor transition pieces, turbine vanes, and blades. Studies with flat surfaces show ... -
Evaporative Thermal Performance of Vapor Chambers Under Nonuniform Heating Conditions
(The American Society of Mechanical Engineers (ASME), 2008)This paper reports the test results of vapor chambers using copper post heaters and silicon die heaters. Experiments were conducted to understand the effects of nonuniform heating conditions ... -
Investigation of Thermal Accommodation Coefficients in Time-Resolved Laser-Induced Incandescence
(The American Society of Mechanical Engineers (ASME), 2008)Accurate particle sizing through time-resolved laser-induced incandescence (TR-LII) requires knowledge of the thermal accommodation coefficient, but the underlying physics of this parameter is poorly ... -
Single- and Dual-Phase-Lagging Heat Conduction Models in Moving Media
(The American Society of Mechanical Engineers (ASME), 2008)Motivated by the recent work of and , (“ Heat Conduction Paradox Involving Second-Sound Propagation in Moving Media,” 2005, Phys. Rev. Lett., 94, p. 154301), we examine the original single- ... -
A Fixed-Angle Dynamic Heat Spreading Model for (An)Isotropic Rear-Cooled Substrates
(The American Society of Mechanical Engineers (ASME), 2008)During a period of almost 40 years already, various fixed-angle heat spreading models have been developed in the literature. These models are commonly used by thermal engineers as approximations ... -
Analytic Solution of Three-Dimensional Viscous Flow and Heat Transfer Over a Stretching Flat Surface by Homotopy Analysis Method
(The American Society of Mechanical Engineers (ASME), 2008)In this paper heat transfer in an electrically conducting fluid bonded by two parallel plates is studied in the presence of viscous dissipation. The plates and the fluid rotate with constant ... -
Thermal Management of Low Profile Electronic Equipment Using Radial Fans and Heat Sinks
(The American Society of Mechanical Engineers (ASME), 2008)There is an increasing need for low profile thermal management solutions for applications in the range of 5–10W, targeted at portable electronic devices. This need is emerging due to enhanced ... -
Erratum: “Use of Streamwise Periodic Boundary Conditions for Problems in Heat and Mass Transfer” [Journal of Heat Transfer, 2007, 129(4), pp. 601–605]
(The American Society of Mechanical Engineers (ASME), 2008)The downstream condition may be written: T(l,y,z)=c1′T(l,y,z)+c2′, where c1′=1/c1 and c2′=−c2/c1. Thus the source terms are aW[(c1−1)TW+c2] at i=1 and aE[(c1′−1)TE+c2′]=aE[(1−c1)TE−c2]/c1 at i=nx. ... -
A Fully Wet and Fully Dry Tiny Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers Under Dehumidifying Conditions
(The American Society of Mechanical Engineers (ASME), 2007)This study proposes a new method, namely the “fully wet and fully dry tiny circular fin method,” for analyzing the heat and mass transfer characteristics of plain fin-and-tube heat exchangers ... -
Approximate Analysis of Thermal Radiation Absorption in Fuel Droplets
(The American Society of Mechanical Engineers (ASME), 2007)The values of absorption coefficients of gasoline fuel (BP Pump Grade 95 RON ULG (research octane number unleaded gasoline)), 2,2,4-trimethylpentane (CH3)2CHCH2C(CH3)3 (iso-octane) and 3-pentanone ... -
Heat Exchanger Efficiency
(The American Society of Mechanical Engineers (ASME), 2007)This paper provides the solution to the problem of defining thermal efficiency for heat exchangers based on the second law of thermodynamics. It is shown that corresponding to each actual heat ... -
Experimental Study and Genetic-Algorithm-Based Correlation on Shell-Side Heat Transfer and Flow Performance of Three Different Types of Shell-and-Tube Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2007)The heat transfer and pressure drop of three types of shell-and-tube heat exchangers, one with conventional segmental baffles and the other two with continuous helical baffles, were experimentally ... -
Natural Convection Heat Transfer From Horizontal Rectangular Ducts
(The American Society of Mechanical Engineers (ASME), 2007)Experimental investigations have been reported on steady state natural convection from the outer surface of horizontal ducts in air. Five ducts have been used with aspect ratios (Γ=duct height/duct ...