Journal of Heat Transfer: Recent submissions
Now showing items 3241-3260 of 3611
-
Probabilistic Approach to Particle-Wall Contact Time in Fluidized Beds
(The American Society of Mechanical Engineers (ASME), 2009)The heat transfer between submerged surface and particles in fluidized bed is affected by particle migration to and from the exchanger surface. A new probabilistic model was developed for ... -
Thermal Homogenization in Spherical Reservoir by Electrohydrodynamic Conduction Phenomenon
(The American Society of Mechanical Engineers (ASME), 2009)Effect of electric conduction phenomenon on the mixing mechanism is studied numerically to thermally homogenize a dielectric liquid with an initial nonuniform temperature distribution. The fluid ... -
Electron-Phonon Interaction Model and Its Application to Thermal Transport Simulation During Electrostatic Discharge Event in NMOS Transistor
(The American Society of Mechanical Engineers (ASME), 2009)First, the electron-phonon interaction model, which has recently been developed by authors for thermal predictions within the silicon devices in micro/nanoscales, is verified through the comparison ... -
Analytical and Experimental Analysis of a High Temperature Mercury Thermosyphon
(The American Society of Mechanical Engineers (ASME), 2009)High temperature thermosyphons are devices designed to operate at temperatures above 400°C. They can be applied in many industrial applications, including heat recovery from high temperature ... -
Direct Simulation Monte Carlo Solution of Subsonic Flow Through Micro/Nanoscale Channels
(The American Society of Mechanical Engineers (ASME), 2009)We use a direct simulation Monte Carlo (DSMC) method to simulate gas heating/cooling and choked subsonic flows in micro/nanoscale channels subject to either constant wall temperature or ... -
Three-Dimensional Numerical Study of Flow and Heat Transfer Enhancement Using Vortex Generators in Fin-and-Tube Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2009)In this paper, a three-dimensional numerical investigation was performed for heat transfer characteristics and flow structure of full scale fin-and-tube heat exchangers with rectangular winglet ... -
Gibbs–Thomson Effect on Spherical Solidification in a Subcooled Melt
(The American Society of Mechanical Engineers (ASME), 2009)This study aims to investigate theoretically the growth of a spherical nucleus due to solidification in an infinite domain of a subcooled melt. The effects on the spherical growth due, ... -
Numerical Modeling of Chaotic Mixing in Electroosmotically Stirred Continuous Flow Mixers
(The American Society of Mechanical Engineers (ASME), 2009)We present numerical studies of particle dispersion and species mixing in a ζ potential patterned straight microchannel. A continuous flow is generated by superposition of a steady pressure-driven ... -
Heat Transfer Enhancement Due to Frequency Doubling and Ruelle–Takens–Newhouse Transition Scenarios in Symmetric Wavy Channels
(The American Society of Mechanical Engineers (ASME), 2009)Heat transfer enhancement characteristics, through a transition scenario of flow bifurcations in symmetric wavy wall channels, are investigated by direct numerical simulations of the mass, momentum, ... -
Measurement of Fluid Temperature Across Microscale Gap Using Two-Color Ratiometric Laser-Induced Fluorescence Technique in Combination With Confocal Microscopy
(The American Society of Mechanical Engineers (ASME), 2009)In the present work, for noninvasive measurement of the liquid temperature in microchannels, the two-color ratiometric laser-induced fluorescence (LIF) technique was combined with the confocal ... -
Exact Solutions Corresponding to the Viscous Incompressible and Conducting Fluid Flow Due to a Porous Rotating Disk
(The American Society of Mechanical Engineers (ASME), 2009)A study is pursued in this paper for the evaluation of the exact solution of the steady Navier–Stokes equation, governing the incompressible viscous Newtonian, electrically conducting fluid flow ... -
Thermal Conductivity Measurements of Nylon 11-Carbon Nanofiber Nanocomposites
(The American Society of Mechanical Engineers (ASME), 2009)Carbon nanofibers (CNFs) were incorporated into nylon 11 to form nylon 11-carbon nanofiber nanocomposites via twin screw extrusion. Injection molding has been employed to fabricate specimens that ... -
Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger
(The American Society of Mechanical Engineers (ASME), 2009)In this paper, three-dimensional numerical simulations with renormalization-group (RNG) k-ε model are performed for the air-side heat transfer and fluid flow characteristics of wavy fin-and-tube ... -
Determination of Heat Transfer in Ducts With Axial Conduction by Variational Calculus
(The American Society of Mechanical Engineers (ASME), 2009)This study uses a methodology based on the calculus of variation to determine the heat transfer in passages with two-dimensional velocity fields such as rectangular channels and in the presence ... -
Subcooled Pool Boiling in Variable Gravity Environments
(The American Society of Mechanical Engineers (ASME), 2009)Virtually all data to date regarding parametric effects of gravity on pool boiling have been inferred from experiments performed in low-g, 1g, or 1.8g conditions. The current work is based on ... -
The Modeling of Form Drag in a Porous Medium Saturated by a Power-Law Fluid
(The American Society of Mechanical Engineers (ASME), 2009)The alternative ways of modeling form drag in a porous medium saturated by a power-law fluid in current usage are discussed. It is argued that the best alternative is to use the same ... -
Dual-Permeability Modeling of Capillary Diversion and Drift Shadow Effects in Unsaturated Fractured Rock
(The American Society of Mechanical Engineers (ASME), 2009)The drift-shadow effect describes capillary diversion of water flow around a drift or cavity in porous or fractured rock, resulting in lower water flux directly beneath the cavity. This paper ... -
Macro- to Microscale Boiling Heat Transfer From Metal-Graphite Composite Surfaces
(The American Society of Mechanical Engineers (ASME), 2009)This paper introduces a novel heat transfer enhancement surface, referred to as metal-graphite composite surface. It is comprised of high thermal conductivity graphite microfibers interspersed ... -
Steady-Periodic Heating of a Cylinder
(The American Society of Mechanical Engineers (ASME), 2009)Steady periodic heating is an important experimental technique for measurement of thermal properties. In these methods the thermal properties are deduced from a systematic comparison between the ... -
Flow Boiling Heat Transfer, Pressure Drop, and Flow Pattern for CO2 in a 3.5mm Horizontal Smooth Tube
(The American Society of Mechanical Engineers (ASME), 2009)CO2 flow boiling heat transfer coefficients and pressure drop in a 3.5mm horizontal smooth tube are presented. Also, flow patterns were visualized and studied at adiabatic conditions in a 3mm ...