Journal of Heat Transfer: Recent submissions
Now showing items 3221-3240 of 3611
-
Full-Field Flow Measurements and Heat Transfer of a Compact Jet Impingement Array With Local Extraction of Spent Fluid
(The American Society of Mechanical Engineers (ASME), 2009)Jet impingement cooling is widely used due to the very high heat transfer coefficients that are attainable. Both single and multiple jet systems can be used, however, multiple jet systems offer ... -
Heat Transfer and Thermodynamic Analyses of Some Typical Encapsulated Ice Geometries During Discharging Process
(The American Society of Mechanical Engineers (ASME), 2009)This study deals with the process of melting in some typical encapsulated ice thermal energy storage (TES) geometries. Cylindrical and slab capsules are compared with spherical capsules when ... -
Modeling Electron-Phonon Nonequilibrium in Gold Films Using Boltzmann Transport Model
(The American Society of Mechanical Engineers (ASME), 2009)Ultrashort-pulsed laser irradiation on metals creates a thermal nonequilibrium between electrons and the phonons. Previous computational studies used the two-temperature model and its variants to ... -
Natural Convection Heat Transfer From Horizontal Rectangular Inverted Notched Fin Arrays
(The American Society of Mechanical Engineers (ASME), 2009)The variables for natural convection cooling with the help of finned surfaces are orientation and geometry. In lengthwise short array (L/H∼5), where single chimney flow pattern is present, a ... -
Flow and Heat Transfer of Natural Convection in Horizontal Annulus With a Heating Element on Inner Cylinder
(The American Society of Mechanical Engineers (ASME), 2009)Experiments have been performed to study natural convection flow and heat transfer in a horizontal annulus when a square heating element is positioned at different locations on the inner insulated ... -
An Experimental Investigation of the Cold Mass Fraction, Nozzle Number, and Inlet Pressure Effects on Performance of Counter Flow Vortex Tube
(The American Society of Mechanical Engineers (ASME), 2009)This paper discusses the experimental investigation of vortex tube performance as it relates to cold mass fraction, inlet pressure, and nozzle number. The orifices have been made of the polyamide ... -
Novel Two-Dimensional Transient Heat Conduction Calculation in a Cooled Rotor: Ventilation Preheating—Blow-Down Flux
(The American Society of Mechanical Engineers (ASME), 2009)This contribution presents an alternative to classical data reduction techniques to measure the heat transfer using thin-film gauges. A finite-element model of the two-dimensional unsteady heat ... -
A Bejan’s Constructal Theory Approach to the Overall Optimization of Heat Exchanging Finned Modules With Air in Forced Convection and Laminar Flow Condition
(The American Society of Mechanical Engineers (ASME), 2009)Optimizing ever smaller heat exchangers determines two opposite needs: augmenting performances, on the one hand; removing heat in excess to reduce failures, on the other. This numerical study, ... -
Convective Heat Transfer Enhancement in a Circular Tube Using Twisted Tape
(The American Society of Mechanical Engineers (ASME), 2009)The secondary flow has been used frequently to enhance the convective heat transfer, and at the same flow condition, the intensity of convective heat transfer closely depends on the thermal ... -
Unveiling Hidden Complex Cavities Formed by Evaporative Nanofluidic (Al2O3) Self-Assembly
(The American Society of Mechanical Engineers (ASME), 2009) -
Condensation of Sodium Vapor and High-Temperature Reaction With Quartz Pore Inner Surface
(The American Society of Mechanical Engineers (ASME), 2009) -
Visualization of Thermally Actuated Pumping in the Leidenfrost Regime by Surface Asymmetry
(The American Society of Mechanical Engineers (ASME), 2009) -
Numerical Analysis of a Two-Dimensional Jet Impinging on an Oscillated Heat Transfer Surface
(The American Society of Mechanical Engineers (ASME), 2009)Numerical analyses were performed to determine the oscillation effect of an impingement surface on the impingement heat transfer and flow with a confined wall. As a moving boundary problem, ... -
Heat Transfer Photogallery
(The American Society of Mechanical Engineers (ASME), 2009)The Thirteenth Heat Transfer Photogallery was sponsored by the K-22 Heat Transfer Visualization Committee for the 2008 International Mechanical Engineering Congress and Exhibition (IMECE) held in ... -
Computational Analysis of Binary-Fluid Heat and Mass Transfer in Falling Films and Droplets
(The American Society of Mechanical Engineers (ASME), 2009) -
Thin-Film Evaporation in an Evaporating Droplet
(The American Society of Mechanical Engineers (ASME), 2009) -
Experimental Visualization of the Thermoacoustic Effect
(The American Society of Mechanical Engineers (ASME), 2009) -
Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in a Confined Narrow Gap
(The American Society of Mechanical Engineers (ASME), 2009)In this paper, the heat transfer characteristics of a circular air jet vertically impinging on a flat plate near to the nozzle (H/d=1–6, where H is the nozzle-to-target spacing and d is the ... -
Homotopy Analysis for Stagnation Slip Flow and Heat Transfer on a Moving Plate
(The American Society of Mechanical Engineers (ASME), 2009)The development of two-dimensional or axisymmetric stagnation flow of an incompressible viscous fluid over a moving plate with partial slip has been investigated. The effects of partial slip on ... -
Computational Simulation of Swirl Enhanced Flow and Heat Transfer in a Twisted Oval Tube
(The American Society of Mechanical Engineers (ASME), 2009)