Journal of Heat Transfer: Recent submissions
Now showing items 3161-3180 of 3611
-
The Effect of the Top Wall Temperature on the Laminar Natural Convection in Rectangular Cavities With Different Aspect Ratios
(The American Society of Mechanical Engineers (ASME), 2009)The effect of the top wall temperature on the laminar natural convection in air-filled rectangular cavities driven by a temperature difference across the vertical walls was investigated for three ... -
Study on Contact Melting Inside an Elliptical Tube With Nonisothermal Wall
(The American Society of Mechanical Engineers (ASME), 2009)The problem of contact melting inside an elliptical tube with nonisothermal wall is investigated. A theoretical model, which the inner wall temperature of source varied with angle ϕ, is established ... -
Convective Performance of Nanofluids in a Laminar Thermally Developing Tube Flow
(The American Society of Mechanical Engineers (ASME), 2009)While many of the published papers on nanofluids focus on measuring the increased thermal conductivity of the suspension under static conditions, the convective performance of these fluids has ... -
Numerical Modeling of Multidirectional Flow and Heat Transfer in Graphitic Foams
(The American Society of Mechanical Engineers (ASME), 2009)To investigate the feasibility of the use of foams with an interconnected spherical pore structure in heat transfer applications, models for heat transfer and pressure drop for this type of ... -
Effect of Loss of Blowing Agents on Thermal Insulation Properties of Polystyrene Foams
(The American Society of Mechanical Engineers (ASME), 2009)This paper presents a numerical study to characterize the effect of loss of blowing agents on the thermal insulation properties of polystyrene foams. In this study, a transient cell-to-cell ... -
Air-Side Surface Wettability Effects on the Performance of Slit-Fin-and-Tube Heat Exchangers Operating Under Wet-Surface Conditions
(The American Society of Mechanical Engineers (ASME), 2009)A study of condensate retention and the attendant thermal-hydraulic effect associated with changes in air-side surface wettability is presented for a series of slit-fin-and-tube heat exchangers ... -
Analytical Characterization and Production of an Isothermal Surface for Biological and Electronic Applications
(The American Society of Mechanical Engineers (ASME), 2009)Characterization and regulation of isothermal surfaces are key issues in a number of thermal management devices. The surface temperature uniformity can be controlled utilizing a variable area ... -
A Simplified Model of Heat and Mass Transfer Between Air and Falling-Film Desiccant in a Parallel-Plate Dehumidifier
(The American Society of Mechanical Engineers (ASME), 2009)This paper presents a simplified model to predict the heat and mass transfer between air and falling-film liquid desiccant during dehumidification in a parallel-plate absorber. First-order, ordinary ... -
Transient Double-Diffusive Convection of Water Around 4°C in a Porous Cavity
(The American Society of Mechanical Engineers (ASME), 2009)The buoyancy-driven transient double-diffusive convection in a square cavity filled with water-saturated porous medium is studied numerically. While the right and left side wall temperatures vary ... -
Numerical Investigation of Flow and Heat Transfer Performance of Nano-Encapsulated Phase Change Material Slurry in Microchannels
(The American Society of Mechanical Engineers (ASME), 2009)Microchannels are used in applications where large amount of heat is produced. Phase change material (PCM) slurries can be used as a heat transfer fluid in microchannels as they provide increased ... -
Investigation of Hierarchically Branched-Microchannel Coolers Fabricated by Deep Reactive Ion Etching for Electronics Cooling Applications
(The American Society of Mechanical Engineers (ASME), 2009)The removal of high heat fluxes from BeO ceramic and GaN-on-SiC semiconductor dies using hierarchically branched-microchannel coolers is investigated, in order to examine the impact of the number ... -
Autonomous Thermal Control System for Highly Variable Environments
(The American Society of Mechanical Engineers (ASME), 2009)An autonomous thermal control system has been developed for instruments with steady temperature requirements that are exposed to widely varying environmental conditions. The active thermal control ... -
Predicting Heat Transfer in Long R-134a Filled Thermosyphons
(The American Society of Mechanical Engineers (ASME), 2009)When traditional air-to-air cooling is too voluminous, heat exchangers with long thermosyphons offer a good alternative. Experiments with a single thermosyphon with a large length-to-diameter ratio ... -
Experimental Investigation of the Effects of Fluid Properties and Geometry on Forced Convection in Finned Ducts With Flow Pulsation
(The American Society of Mechanical Engineers (ASME), 2009)An experimental study was conducted on the effects of flow pulsation on the convective heat transfer coefficients in a flat channel with series of regular spaced fins. Glycerol-water mixtures ... -
Closed Form Solutions For Mixed Convection With Magnetohydrodynamic Effect in a Vertical Porous Annulus Surrounding an Electric Cable
(The American Society of Mechanical Engineers (ASME), 2009)Mixed convection Darcy flow in a vertical porous annulus around a straight electric cable is investigated. It is assumed that the flow is fully developed and parallel. Moreover, the Boussinesq ... -
A Hybrid Large Eddy Simulation/Filtered Mass Density Function for the Calculation of Strongly Radiating Turbulent Flames
(The American Society of Mechanical Engineers (ASME), 2009)Due to the complex nonlinear coupling of turbulent flow, finite-rate combustion chemistry and thermal radiation from combustion products and soot, modeling, and/or simulation of practical combustors, ... -
Analysis of Instantaneous Turbulent Velocity Vector and Temperature Profiles in Transitional Rough Channel Flow
(The American Society of Mechanical Engineers (ASME), 2009)The instantaneous velocity vector and instantaneous temperature in a turbulent flow in a transitionally rough channel have been analyzed from unsteady Navier–Stokes equations and unsteady thermal ... -
Numerical Simulation of the Effects of a Thermally Significant Blood Vessel on Freezing by a Circular Surface Cryosurgical Probe Compared With Experimental Data
(The American Society of Mechanical Engineers (ASME), 2009)The dynamic thermal interaction between a surface cryosurgical probe (heat sink) and an embedded cylindrical tube (heat source), simulating a thermally-significant blood vessel, has been studied. ... -
Vertical Movement of Isothermal Lines in Water
(The American Society of Mechanical Engineers (ASME), 2009)We experimentally investigated the development and vertical movement of isothermal lines in cooling columns of confined water. The isothermal line develops spontaneously whenever the bottom of the ... -
Comparative Radial Heat Flow Method for Thermal Conductivity Measurement of Liquids
(The American Society of Mechanical Engineers (ASME), 2009)A steady state thermal conductivity measuring setup based on the comparative radial heat flow method is presented. The setup consists of a pair of coaxial cylinders as its main components, ...