Journal of Heat Transfer: Recent submissions
Now showing items 3141-3160 of 3611
-
Special Issue on Micro/Nanoscale Heat Transfer—Part I
(The American Society of Mechanical Engineers (ASME), 2009)Research and education on micro/nanoscale heat transfer have advanced rapidly over the last decade through many dedicated individuals and teams, with direct impact now extending into other fields ... -
Examining Interfacial Diffuse Phonon Scattering Through Transient Thermoreflectance Measurements of Thermal Boundary Conductance
(The American Society of Mechanical Engineers (ASME), 2009)Today’s electronic and optoelectronic devices are plagued by heat transfer issues. As device dimensions shrink and operating frequencies increase, ever-increasing amounts of thermal energy are being ... -
Experimental Investigation of Miniature Three-Dimensional Flat-Plate Oscillating Heat Pipe
(The American Society of Mechanical Engineers (ASME), 2009)An experimental investigation on the effects of condenser temperatures, heating modes, and heat inputs on a miniature three-dimensional (3D) flat-plate oscillating heat pipe (FP-OHP) was conducted ... -
Flow and Stability of Rivulets on Heated Surfaces With Topography
(The American Society of Mechanical Engineers (ASME), 2009)Surfaces with topography promote rivulet flow patterns, which are characterized by a high cumulative length of contact lines. This property is very advantageous for evaporators and cooling devices, ... -
Contribution of Ballistic Electron Transport to Energy Transfer During Electron-Phonon Nonequilibrium in Thin Metal Films
(The American Society of Mechanical Engineers (ASME), 2009)With the ever decreasing characteristic lengths of nanomaterials, nonequilibrium electron-phonon scattering can be affected by additional scattering processes at the interface of two materials. ... -
Solution of Thermally Developing Zone in Short Micro-/Nanoscale Channels
(The American Society of Mechanical Engineers (ASME), 2009)We numerically solve the Navier–Stokes equations to study the rarefied gas flow in short micro- and nanoscale channels. The inlet boundary conditions play a critical role in the structure of ... -
Nanofluids: Synthesis, Heat Conduction, and Extension
(The American Society of Mechanical Engineers (ASME), 2009)We synthesize eight kinds of nanofluids with controllable microstructures by a chemical solution method (CSM) and develop a theory of macroscale heat conduction in nanofluids. By the CSM, we ... -
Discrete Ordinates and Monte Carlo Methods for Radiative Transfer Simulation Applied to Computational Fluid Dynamics Combustion Modeling
(The American Society of Mechanical Engineers (ASME), 2009)Modeling radiative heat transfer in combustion applications involving complex geometries and detailed spectral properties of radiative gaseous species remains a difficult challenge, especially when ... -
Analytical Solutions of Nusselt Number for Thermally Developing Radial Flow Through Small Gap Between Two Parallel Disks
(The American Society of Mechanical Engineers (ASME), 2009)Closed form solutions are developed for heat transfer due to radial flow through small gap between two parallel isothermal disks. The thermal entrance length increases with an increase in Peclet ... -
A Simple Model for Transient Heat Conduction in an Infinite Cylinder With Convective Boundary Conditions
(The American Society of Mechanical Engineers (ASME), 2009)A perturbation method is used to solve an unsteady one-dimensional heat conduction problem in a cylinder. A simple second order explicit solution is obtained. It is shown that this solution ... -
Molecular Dynamics Based Analysis of Nucleation and Surface Energy of Droplets in Supersaturated Vapors of Methane and Ethane
(The American Society of Mechanical Engineers (ASME), 2009)Homogeneous nucleation processes are characterized by the nucleation rate and the critical droplet size. Molecular dynamics simulation is applied for studying homogeneous nucleation during condensation ... -
Effect of Absorptive Coating of the Hot Fluid Passage of a Heat Exchanger Employing Exergy-Optimized Pin Fins in High Temperature Applications
(The American Society of Mechanical Engineers (ASME), 2009)An expression for the optimum pin fin dimension is derived on exergy basis for a high temperature exchanger employing pin fins. The present result differs from that obtained by and (1982, “ ... -
Experimental Study of Flow Critical Heat Flux in Alumina-Water, Zinc-Oxide-Water, and Diamond-Water Nanofluids
(The American Society of Mechanical Engineers (ASME), 2009)It is shown that addition of alumina, zinc-oxide, and diamond particles can enhance the critical heat flux (CHF) limit of water in flow boiling. The particles used here were in the nanometer ... -
Heat Transfer Augmentation of Aqueous Suspensions of Nanodiamonds in Turbulent Pipe Flow
(The American Society of Mechanical Engineers (ASME), 2009)This paper aims to study the convective heat transfer behavior of aqueous suspensions of nanodiamond particles flowing through a horizontal tube heated under a constant heat flux condition. ... -
Special Issue on Micro/Nanoscale Heat Transfer—Part II
(The American Society of Mechanical Engineers (ASME), 2009)Research and education on micro/nanoscale heat transfer have advanced rapidly over the last decade through many dedicated individuals and teams, with direct impact now extending into other fields ... -
Effect of CuO Nanoparticle Concentration on R134a/Lubricant Pool-Boiling Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2009)This paper quantifies the influence of copper (II) oxide (CuO) nanoparticle concentration on the boiling performance of R134a/polyolester mixtures on a roughened horizontal flat surface. Nanofluids ... -
Thermal Conductivity Measurements on Polycrystalline Silicon Microbridges Using the 3ω Technique
(The American Society of Mechanical Engineers (ASME), 2009)The thermal performance of microelectromechanical systems devices is governed by the structure and composition of the constituent materials as well as the geometrical design. With the continued ... -
Atomic-Scale Three-Dimensional Phononic Crystals With a Very Low Thermal Conductivity to Design Crystalline Thermoelectric Devices
(The American Society of Mechanical Engineers (ASME), 2009)Superlattices with thermal-insulating behaviors have been studied to design thermoelectric materials but affect heat transfer in only one main direction and often show many cracks and dislocations ... -
Performance of Gas-to-Gas Micro-Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2009)Heat transfer performance of two-stream parallel and counter-flow gas-to-gas micro-heat exchangers are investigated numerically. Flow passages are plane channels with heights in the range of 10–100μm ... -
A Micro-Insulation Concept for MEMS Applications
(The American Society of Mechanical Engineers (ASME), 2009)Small scale, thermally driven power sources will require appropriate insulation to achieve sufficiently high thermal conversion efficiencies. This paper presents a micro-insulation design, which was ...