Journal of Heat Transfer: Recent submissions
Now showing items 2701-2720 of 3611
-
Flow Boiling of R134a in Circular Microtubes—Part I: Study of Heat Transfer Characteristics
(The American Society of Mechanical Engineers (ASME), 2011)An experimental study of two-phase heat transfer coefficients was carried out using R134a in uniformly heated horizontal circular microtubes with diameters from 0.50 mm to 1.60 mm over a range ... -
Flow Boiling of R134a in Circular Microtubes—Part II: Study of Critical Heat Flux Condition
(The American Society of Mechanical Engineers (ASME), 2011)A detailed experimental study was carried out on the critical heat flux (CHF) condition for flow boiling of R134a in single circular microtubes. The test sections had inner diameters (ID) of ... -
Natural Convection in a Saturated Variable-Porosity Medium Due to Microwave Heating
(The American Society of Mechanical Engineers (ASME), 2011)Microwave heating of a porous medium with a nonuniform porosity is numerically investigated based on a proposed numerical model. A two-dimensional variation of porosity of the medium is considered. ... -
On the Scalability of Liquid Microjet Array Impingement Cooling for Large Area Systems
(The American Society of Mechanical Engineers (ASME), 2011)The necessity for an efficient thermal management system covering large areas is growing rapidly with the push toward more electric systems. A significant amount of research over the past 2 ... -
Cooling Characteristics of Regenerative Magnetic Refrigeration With Particle-Packed Bed
(The American Society of Mechanical Engineers (ASME), 2011)The aim of our study was to elucidate the fundamental cooling characteristics and to improve the cooling characteristics of a room-temperature magnetic refrigerator operated under an active ... -
Simulation on Flow and Heat Transfer in Diesel Particulate Filter
(The American Society of Mechanical Engineers (ASME), 2011)To reduce particulate matters including soot, a diesel particulate filter (DPF) has been developed for the after-treatment of exhaust gas. Since the filter is plugged with particles that would ... -
High Rayleigh Number Natural Convection Inside 2D Porous Enclosures Using the Lattice Boltzmann Method
(The American Society of Mechanical Engineers (ASME), 2011)Lattice Boltzmann method (LBM) is employed to investigate natural convection inside porous medium enclosures at high Rayleigh numbers. Volume averaged porous medium model is coupled with the ... -
Analysis of Radiation Modeling for Turbulent Combustion: Development of a Methodology to Couple Turbulent Combustion and Radiative Heat Transfer in LES
(The American Society of Mechanical Engineers (ASME), 2011)Radiation exchanges must be taken into account to improve large eddy simulation (LES) prediction of turbulent combustion, in particular, for wall heat fluxes. Because of its interaction with ... -
Geometrical Effects on the Temperature Distribution in a Half-Space Due to a Moving Heat Source
(The American Society of Mechanical Engineers (ASME), 2011)Fundamental problem of heat transfer within a half-space due to a moving heat source of hyperelliptical geometry is studied in this work. The considered hyperelliptical geometry family covers a ... -
Convective Heat Transfer in Graphite Foam Heat Sinks With Baffle and Stagger Structures
(The American Society of Mechanical Engineers (ASME), 2011)Highly conductive porous media have recently been considered for enhanced cooling applications due to their large internal contact surface area, which promotes convection at the pore level. In ... -
Mathematical Modeling of Transport Processes in Funnel Shaped Mold of Steel Thin Slab Continuous Caster
(The American Society of Mechanical Engineers (ASME), 2011)In this work a three-dimensional fluid flow and heat transfer model was developed to predict the flow pattern and superheat dissipation in funnel shaped mold of a thin slab continuous caster ... -
Heat Transfer Performance of Aluminum Foams
(The American Society of Mechanical Engineers (ASME), 2011)Because of their interesting heat transfer and mechanical properties, metal foams have been proposed for several different applications, thermal and structural. This paper aims at pointing out ... -
A Semi-Empirical Model for Condensation Heat Transfer Coefficient of Mixed Ethanol-Water Vapors
(The American Society of Mechanical Engineers (ASME), 2011)A semi-empirical model describing the heat transfer characteristics of the pseudo-dropwise condensation of binary vapor on a cooled vertical tube has been formulated. By ignoring the thin film ... -
Transient Thermal Response of Pin-Fin Sandwich Panels to Hot Jet Impingement
(The American Society of Mechanical Engineers (ASME), 2011)The transient thermal response of a sandwich panel with pin-fin core subjected to nonuniform impinging jet heating was investigated theoretically and experimentally. Forced convection flow passing ... -
Erratum: “The Effect of Buoyancy on Heat Transfer in Supercritical Water Flow in a Horizontal Round Tube” [ASME J. Heat Transfer, 2005, 127(8), pp. 897–902]
(The American Society of Mechanical Engineers (ASME), 2011)This paper has an error as follows. -
Comparisons of Pins/Dimples/Protrusions Cooling Concepts for a Turbine Blade Tip-Wall at High Reynolds Numbers
(The American Society of Mechanical Engineers (ASME), 2011)The blade tip region encounters high thermal loads because of the hot gas leakage flows, and it must therefore be cooled to ensure a long durability and safe operation. A common way to cool ... -
Heat Conduction Equation Solution in the Presence of a Change of State in a Bounded Axisymmetric Cylindrical Domain
(The American Society of Mechanical Engineers (ASME), 2011)The heat conduction problem, in the presence of a change of state, was solved for the case of an indefinitely long cylindrical layer cavity. As boundary conditions, it is imposed that the ... -
A Correlation for Confined Nucleate Boiling Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2011)This study presents a generalized confined boiling correlation applicable for various working fluids and operating conditions. A dimensionless parameter, Bond number, has been incorporated into the ... -
Thermal Issues in Emerging Technologies
(The American Society of Mechanical Engineers (ASME), 2011)This special issue of the Journal of Heat Transfer contains six papers selected out of the 53 presented at the Second International Conference on Thermal Issues in Emerging Technologies, Theory ... -
Anharmonic Phonon Interactions at Interfaces and Contributions to Thermal Boundary Conductance
(The American Society of Mechanical Engineers (ASME), 2011)Continued reduction in characteristic dimensions in nanosystems has given rise to increasing importance of material interfaces on the overall system performance. With regard to thermal transport, ...