Journal of Structural Engineering: Recent submissions
Now showing items 5001-5020 of 10765
-
Cast Steel Connectors for Circular Hollow Section Braces under Inelastic Cyclic Loading
(American Society of Civil Engineers, 2008)Although concentrically braced frames are an efficient means of providing lateral support in steel structures, many such frames designed to resist seismic loading and featuring hollow structural section braces have performed ... -
Parametric Equations to Predict SCF of Axially Loaded Completely Overlapped Tubular Circular Hollow Section Joints
(American Society of Civil Engineers, 2008)This paper presents a set of parametric equations for predicting the stress concentration factor (SCF) at the crown toe, saddle, and crown heel of completely overlapped tubular circular hollow section joints under lap brace ... -
Shear Diaphragm Bracing of Beams. I: Stiffness and Strength Behavior
(American Society of Civil Engineers, 2008)Light gauge metal decking is commonly used in the building and bridge industries for concrete formwork. In addition to supporting the concrete, the metal forms also improve the lateral-torsional buckling capacity of the ... -
Shear Diaphragm Bracing of Beams. II: Design Requirements
(American Society of Civil Engineers, 2008)Light gauge metal decking is commonly used in the building and bridge industries for concrete formwork. In addition to supporting the wet concrete, the metal forms also improve the lateral-torsional buckling capacity of ... -
Strength and Reliability of Steel Frames with Random Properties
(American Society of Civil Engineers, 2008)This paper studies the effects of random properties on the strength and reliability of two steel frames. Monte Carlo simulation is used to analyze the behavior of a low-rise industrial frame and a grain storage bin. Both ... -
Structural Stainless Steel Design: Resistance Based on Deformation Capacity
(American Society of Civil Engineers, 2008)Stainless steel structural sections possess several features that result in a significantly different response to that of equivalent carbon steel sections. To date these features have not been fully recognized in design ... -
Testing of Full-Scale Two-Story Steel Plate Shear Wall with Reduced Beam Section Connections and Composite Floors
(American Society of Civil Engineers, 2008)A two-phase experimental program was generated on a full-scale two-story steel plate shear wall with reduced beam section connections and composite floors, to experimentally address the replaceability of infill panels ... -
Parametric Equation for Static Strength of Tubular Circular Hollow Section Joints with Complete Overlap of Braces
(American Society of Civil Engineers, 2008)This paper presents the development of a parametric equation for predicting the ultimate capacity of tubular circular hollow section joint with complete overlap of braces based on the experimental and numerical investigation. ... -
Behavior of Integrated Crosstie Trackwork System
(American Society of Civil Engineers, 2008)Light rail systems are an important transportation mode in urban centers. An advanced rail transit system has been developed that utilizes linear induction motors (LIM) for propulsion and braking of the vehicles. Due to ... -
Performance-Based Seismic Design of Wood Frame Buildings Using a Probabilistic System Identification Concept
(American Society of Civil Engineers, 2008)Performance-based seismic design (PBSD) of wood frame structures has been only preliminarily investigated by a handful of researchers around the world and is currently under development in the United States as well as other ... -
FRP Z-Spike Repairing of Wood Railroad Crossties
(American Society of Civil Engineers, 2008)Load tests of the effect of fiber-reinforced polymer (FRP) reinforcing rods (Z-spikes) on the flexural stiffness of deteriorated railroad crossties were conducted. Reinforcement was provided by installing -
Design Formulas for Damping of a Stay Cable with a Damper
(American Society of Civil Engineers, 2008)The performance of a damper in controlling large-amplitude vibrations of a stay cable in a bridge is influenced by essential parameters such as the amount of sag and flexural rigidity of the cable, and the stiffness of the ... -
Bang-Bang and Semiactive Control with Variable Stiffness TMDs
(American Society of Civil Engineers, 2008)A semiactive control strategy for the vibration control of structures using a stiffness varying tuned mass damper (TMD) with application of bang-bang control force to TMD is proposed. The control strategy involves a ... -
Vibration Controller Design for Confined Masonry Walls by Distributed Genetic Algorithms
(American Society of Civil Engineers, 2008)Active control of confined masonry walls with nonlinear hysteretic response has been studied through numerical simulation in this paper. The objective has been to reduce the response to below the failure level when the ... -
Design of Optimally Reinforced RC Beam, Column, and Wall Sections
(American Society of Civil Engineers, 2008)A conjugate gradient search method is coupled with a general model for the ultimate strength of a rectangular reinforced concrete (RC) cross section. Reinforcement required to provide reliable resistance identically equal ... -
Dynamic Serviceability in Lightweight Engineered Timber Floors
(American Society of Civil Engineers, 2008)Vibration of lightweight engineered timber floors (ETFs) is a problem occasionally reported by occupants of dwellings constructed with such floors. Vibration of timber floors has been studied extensively in the past resulting ... -
Nonlinear Model-Based System Identification of Lead–Rubber Bearings
(American Society of Civil Engineers, 2008)A nonlinear model-based system identification method is proposed, formulated, implemented, and applied to a three-span continuous base-isolated bridge. Transverse and rotational rigid-body motions of the bridge superstructure ... -
Seismic Performance Evaluation of a Large-Scale Composite MRF Using Pseudodynamic Testing
(American Society of Civil Engineers, 2008)The seismic performance of a composite moment resisting frame (MRF) comprised of concrete filled tube (CFT) columns and wide flange beams was investigated experimentally. The four-story composite MRF test structure was ... -
Seismic Performance of Pre-Northridge Welded Steel Moment Connections to Built-Up Box Columns
(American Society of Civil Engineers, 2008)Results of experimental and analytical investigations of the seismic response of fully restrained steel moment connections between deep W-shape beams and deep and square built-up box columns are presented. Prototype ... -
Continuum Model for In-Plane Anisotropic Inelastic Behavior of Masonry
(American Society of Civil Engineers, 2008)The paper addresses the problem of describing the anisotropic damage process and the dissipative behavior of masonry structures under static incremental and dynamic loads. A homogenized continuum model, based on simplified ...