Journal of Structural Engineering: Recent submissions
Now showing items 4261-4280 of 10765
-
Nonlinear Seismic Analysis of Circular Concrete-Filled Steel Tube Members and Frames
(American Society of Civil Engineers, 2012)Accurate nonlinear formulations are necessary for the assessment of structures under seismic and other extreme loading. In this work, a three-dimensional distributed plasticity beam element formulation for circular ... -
Branch Plate-to-Circular Hollow Structural Section Connections. II: X-Type Parametric Numerical Study and Design
(American Society of Civil Engineers, 2012)This paper presents a numerical finite-element parametric study on the behavior of transverse or longitudinal X-type plate-to-circular hollow section connections loaded under branch plate tension or compression, to evaluate ... -
Development of a Reliability Framework for the Use of Advanced Nonlinear Finite Elements in the Design of Concrete Structures
(American Society of Civil Engineers, 2012)This paper proposes a methodology that uses advanced nonlinear finite-element analysis for determining a global resistance factor for the design of reinforced concrete structures. It introduces a new reliability approach ... -
Full-Scale Validation of Dynamic Wind Load on a Super-Tall Building under Strong Wind
(American Society of Civil Engineers, 2012)This paper presents work on validating the dynamic wind load predicted by a wind tunnel model with the values identified from full-scale field vibration data of a super-tall building in Hong Kong. Dynamic wind load in this ... -
Guidance for the Design of Spliced Columns
(American Society of Civil Engineers, 2012)Steel columns in sway and nonsway frames that are spliced along their length generally have a lower strength capacity in compression. This load capacity can be further reduced owing to the inevitable presence of small ... -
Experimental Investigations of Loading Rate Effects in Reinforced Concrete Columns
(American Society of Civil Engineers, 2012)Seismic loading rates can significantly affect the behavior of reinforced concrete (RC) elements. However, few data are available to quantify these effects. Shaking table tests allow the study of loading rate phenomena; ... -
Modeling of Fracture in the Sill Plate in Partially Anchored Shear Walls
(American Society of Civil Engineers, 2012)This study relates to the topic of anchorage of shear walls. At times, eccentric forces between the sheathing and the anchoring devices may be introduced in the sill plate. In severe cases, such forces may cause the sill ... -
Pounding of an 18-Story Building During Recorded Earthquakes
(American Society of Civil Engineers, 2012)During the San Fernando Earthquake (1971), two of the three triaxial recording instruments placed in an 18-story steel building in Los Angeles recorded the impact with an adjacent reinforced concrete parking structure. ... -
Structural Behavior of Thin-Walled Metal Silos Subject to Different Flow Channel Sizes under Eccentric Discharge Pressures
(American Society of Civil Engineers, 2012)The condition of eccentric discharge is known to be one of the most critical for the design of thin-walled cylindrical metal silos. Significant progress has been made in recent years in devising a relatively realistic set ... -
Generation and Nomenclature of Tessellations and Double-Layer Grids
(American Society of Civil Engineers, 2012)The aim of this work is to establish a systematic methodology for generating automatically different tessellations and double-layer grids (DLGs) following a newly defined, specific nomenclature. This particular nomenclature ... -
Eccentric Axial Load Testing for Concrete-Encased Steel Columns Using 800 MPa Steel and 100 MPa Concrete
(American Society of Civil Engineers, 2012)Seven concrete-encased steel columns using high-strength steel (nominal yield strength -
Tension Stiffening in Prestressed Concrete Beams Using Moment-Curvature Relationship
(American Society of Civil Engineers, 2012)Tension stiffening phenomenon plays a vital role in serviceability of nonprestressed reinforced concrete (RC) beams as it enhances the postcracking flexural stiffness leading to a smaller deflection, accordingly. However, ... -
Simple Beam Model to Estimate Leakage in Longitudinally Cracked Pressurized Pipes
(American Society of Civil Engineers, 2012)Losses from water distribution systems are reaching alarming levels in many cities throughout the world. Leakage is often the principal cause of water loss because of aging and deterioration of these systems, and pressure ... -
Midply Truss Wall System: High-Performance Shear Wall for Midrise Wood-Frame Buildings
(American Society of Civil Engineers, 2012)A high-performance wood-frame shear wall system, named the MIDPLY truss wall (MTW), was developed for application to midrise wood-frame buildings. The basic MTW system consists of metal-plate–connected wood trusses, sheathing ... -
Evaluation of Racking Performance of Wood Portal Frames with Different Wall Configurations and Construction Details
(American Society of Civil Engineers, 2012)The performance of portal frame walls was studied using a finite-element model verified with results from tests of full-size portal frame walls. Parameters such as wall height, metal strap type and location, doubling of ... -
Experimental Investigation of Self-Centering Steel Plate Shear Walls
(American Society of Civil Engineers, 2012)A series of subassembly tests were conducted to investigate the behavior of the self-centering steel plate shear wall (SC-SPSW) system under cyclic loading. The SC-SPSW system utilizes thin steel web plates to provide ... -
Horizontal Skyscraper: Innovative Structural Design of Shenzhen VANKE Center
(American Society of Civil Engineers, 2012) -
Transverse Joint Details with Tight Bend Diameter U-Bars for Accelerated Bridge Construction
(American Society of Civil Engineers, 2012)This paper focuses on an investigation of transverse joint details with tight bend diameter U-bars for accelerated bridge construction. It presents the testing results of potential alternate reinforcing materials and joint ... -
Cold-Formed Steel Framed Gypsum Shear Walls: In-Plane Response
(American Society of Civil Engineers, 2012)Cold-formed steel (CFS) framed gypsum shear walls are common elements on light-frame structures, and they may be designed as the primary lateral force-resisting (LFR) system or function as secondary LFR elements. This paper ...