Journal of Structural Engineering: Recent submissions
Now showing items 3241-3260 of 10765
-
Editor's Note
(American Society of Civil Engineers, 1998) -
Testing and Design of Aluminum Alloy Cross Sections in Compression
(American Society of Civil Engineers, 2014)Aluminum alloys are used in a wide range of engineering applications and are gaining increasing usage in the construction sector, offering high strength-to-weight ratios and good durability. In this paper, a series of ... -
Discussion of “<i>Strength and Ductility of Confined Concrete</i>” by M. Saatcioglu and S. R. Razvi (June, 1992, Vol. 118, No. 6)
(American Society of Civil Engineers, 1993) -
Distortional Buckling of CFS Stiffened Lipped Channel Compression Members
(American Society of Civil Engineers, 2014)The direct strength method (DSM) simplified the design of cold-formed steel (CFS) beams and columns compared with the traditional effective width method (EWM). In this paper, DSM equations for the distortional buckling ... -
Lateral Bracing Forces in Columns with Two Unequal Spans
(American Society of Civil Engineers, 1993)Elastic columns with two spans of arbitrary length ratio are investigated. The base is pinned and may include a rotational spring. An elastic support acts between the spans, and the top is pinned or supported elastically. ... -
Service Performance of Steel Bridges Compared to Fatigue‐Life Predictions
(American Society of Civil Engineers, 1993)Ten continuous, rolled‐steel‐beam Interstate Highway bridges containing welded cover plates and welded splices were analyzed for fatigue life according to guidelines issued by the American Association of State Highway and ... -
Tether Deformation and Tension Leg Platform Surge
(American Society of Civil Engineers, 1984)Estimates of tension leg platform (TLP) surge presented in the literature are generally based on the assumption that the tethers are straight at all times, i.e., that transverse deformations of tethers due to hydrodynamic ... -
Errata for “Robust Building Stiffness Design for Variable Critical Excitations” by Izuru Takewaki
(American Society of Civil Engineers, 2003) -
Editor’s Note
(American Society of Civil Engineers, 2008) -
Discussion of “<i>Bridge Loading: Research Needed</i>” by The Committee on Loads and Forces on Bridges of the Committee on Bridges of the Structural Division (May, 1982)
(American Society of Civil Engineers, 1984) -
Editor’s Note
(American Society of Civil Engineers, 2007) -
Distortion of Concrete Box Beams due to Eccentric Transverse Loads
(American Society of Civil Engineers, 1991)A study of the distortion of thin‐walled concrete trapezoidal single‐ and double‐cell box beams due to eccentric loading at an arbitrary transverse position on the top flange is presented. The governing equation for the ... -
Book Reviews: Design and Optimization of Laminated Composite Materials
(American Society of Civil Engineers, 1999) -
Three Books for Cold-Formed Steel Design
(American Society of Civil Engineers, 2002) -
Closure to “<i>Lateral Instability of I‐beams with Imperfections</i>” by Hiroshi Yoshida and Kouji Maegawa (August, 1984)
(American Society of Civil Engineers, 1986) -
Discussion of “Response of Restrained Concrete Beams under Design Fire Exposure” by M. B. Dwaikat and V. K. R. Kodur
(American Society of Civil Engineers, 2011) -
Discussion of “<i>Wave and Earthquake Response of Offshore Structures: Evaluation of Modal Solutions</i>” by Stavros A. Anagnostopoulos (October, 1982)
(American Society of Civil Engineers, 1983) -
Creep Behavior of Structural Timber under Varying Humidity Conditions
(American Society of Civil Engineers, 1994)The effects on wood of simultaneous mechanical and moisture loading are studied. A constitutive model is given for the case of uniaxial stress in the longitudinal direction. The model has been quantified on the basis of ... -
Discussion of “<i>Structural Seismic Damper</i>” by Manuel Aguirre and A. Roberto Sánchez (May, 1992, Vol. 118, No. 5)
(American Society of Civil Engineers, 1993) -
Closure to “<i>Single‐Span Deep Beams</i>” by J. E. Barry and Heino Ainso (March, 1983)
(American Society of Civil Engineers, 1984)