Journal of Structural Engineering: Recent submissions
Now showing items 3221-3240 of 10765
-
Concomitant Strength Relationship for Lumber
(American Society of Civil Engineers, 1983)The concomitant relationship between the bending and tensile strength properties of a common machine stress rated grade of dimension lumber was studied. Test specimens, subjected to a tensile proof load with the survivors ... -
Closure to “<i>Finite Element for Shear Walls in Multistory Frames</i>” by William Weaver, Jr., Dong‐Guen Lee, and George Derbalian (July, 1981)
(American Society of Civil Engineers, 1983) -
Closure to “<i>Wind Pressures on Low Buildings with Parapets</i>” by Theodore Stathopoulos (December, 1982)
(American Society of Civil Engineers, 1983) -
Editorial Board Change
(American Society of Civil Engineers, 2000) -
Multiple Tuned Liquid Dampers for Efficient and Robust Structural Control
(American Society of Civil Engineers, 2015)In traditional tuned liquid damper (TLD) installations, TLD tank(s) are tuned to a single optimal frequency as determined by well-known dynamic vibration absorber theory. A multiple tuned liquid damper (MTLD) is created ... -
Fatigue Life Fragilities and Performance-Based Design of Wind Turbine Tower Base Connections
(American Society of Civil Engineers, 2015)Wind turbines are typically designed for a target service life of 20 years because of fatigue-related failures of the moving components such as the rotors and blades. Designing the tower to have the same lifetime as other ... -
Erratum: “Residual Stresses in Beams with Yielding During Unloading” by Aron Zaslavsky (March, 1989, Vol. 115, No. 3)
(American Society of Civil Engineers, 1989) -
Errata for “Special Issue on Design and Analysis of Structures with Seismic Damping Systems” by Michael D. Symans
(American Society of Civil Engineers, 2008) -
Closure to “<i>Crack Band Based Model for FEM Analysis of Concrete Structures</i>” by Grzegorz Gajer and Peter F. Dux (June, 1990, Vol. 116, No. 6)
(American Society of Civil Engineers, 1992) -
Closure to “<i>Torsion Tests on Reinforced Concrete Slab Elements</i>” by Peter Marti, Peter Leesti, and Waseem U. Khalifa (May, 1987, Vol. 113, No. 5)
(American Society of Civil Engineers, 1989) -
Discussion of “<i>Estimating Periods of Vibration of Tall Buildings</i>” by Bryan Stafford Smith and Elizabeth (May, 1986, Vol. 112, No. 5)
(American Society of Civil Engineers, 1987) -
Closure to “<i>Hot Spot Stresses of Tubular Joints Subjected to Combined Loadings</i>” Ai‐Kah Soh and Chee‐Kiong Soh (February, 1993, Vol. 119, No. 2)
(American Society of Civil Engineers, 1994) -
Erratum:
(American Society of Civil Engineers, 1994) -
Relaxation of ASTM A325 Bolted Assemblies
(American Society of Civil Engineers, 2014)Results from a series of tests intended to study loss of pretension force in bolted assemblies are presented. The test matrix included ASTM A325 assemblies with various direct tension indicators (DTIs), some through-hardened ... -
Editor's Note
(American Society of Civil Engineers, 1998) -
Closure to “<i>Stress‐Strain Curves for Brick Masonry in Biaxial Compression</i>” by Krishna Naraine and Sachchidanand Sinha (June, 1992, Vol. 118, No. 6)
(American Society of Civil Engineers, 1994) -
Discussion of “<i>Transverse Stirrup Spacing in R/C Beams</i>” by Wayne Hsiung and Gregory C. Frantz (February, 1985, Vol. 111, No. 2)
(American Society of Civil Engineers, 1987) -
Closure to “<i>Nonprismatic Shear Beams</i>” by Stefan J. Medwadowski (May, 1984)
(American Society of Civil Engineers, 1985) -
Editor's Note
(American Society of Civil Engineers, 1996)