Journal of Structural Engineering: Recent submissions
Now showing items 3001-3020 of 10765
-
Behavior and Strength of Headed Stud–SFRCC Shear Connection. I: Experimental Study
(American Society of Civil Engineers, 2016)The performance of a single-headed stud and group of studs embedded in steel-fiber-reinforced cementitious composites (SFRCC) were investigated by conducting push-out tests. A total of 16 specimens were tested with various ... -
Numerical Modeling of Conventional Steel Stud Walls’ Static Resistance for Blast Response Predictions
(American Society of Civil Engineers, 2014)Several experimental studies were conducted to evaluate the energy-absorption capacity of conventional and nonconventional cold-formed steel (CFS) stud walls for blast resistance. Recently, experiments were performed to ... -
Influence of Charge Shape and Point of Detonation on Blast-Resistant Design
(American Society of Civil Engineers, 2016)Charts in technical manuals and standards of practice can be used to compute incident and reflected peak overpressures and scaled impulses generated by a detonation of a high explosive. Design values are reported for ... -
Numerical Modeling of Concrete-Filled FRP Tubes’ Dynamic Behavior under Blast and Impact Loading
(American Society of Civil Engineers, 2016)A major difficulty of the analysis of and design for close-in blasts is the high variability of the blast shock waves and the complex interactions between these waves and structures. Close-in blasts also tend to be severe ... -
Local–Global Interaction Buckling of Stainless Steel I-Beams. II: Numerical Study and Design
(American Society of Civil Engineers, 2015)The paper presents a detailed finite-element model used to study the local–global interaction buckling of stainless steel I-section beams. The model was constructed with the commercial software package -
Model of the Shear Behavior of Unbonded Fiber-Reinforced Elastomeric Isolators
(American Society of Civil Engineers, 2015)In this paper, an analytical model is developed and used to predict the horizontal behavior of unbonded fiber-reinforced elastomeric isolators (FREIs). An advantageous feature of unbonded FREIs is the ability to undergo ... -
Erratum: “Combined Bending and Axial Loading in Lumber” by Andrew H. Buchanan (December, 1986, Vol. 112, No. 12)
(American Society of Civil Engineers, 1987) -
Dynamic Performance of Flush End-Plate Beam-Column Connections and Design Applications in Progressive Collapse
(American Society of Civil Engineers, 2016)An experimental program was conducted in this study to investigate the dynamic behavior of flush end plate steel beam-column cruciform connections following instantaneous removal of a central supporting column. The dynamic ... -
Modeling Reinforced Concrete Structures Using Smooth Plasticity and Damage Models
(American Society of Civil Engineers, 2016)In this work, a new smooth model for uniaxial concrete behavior that combines plasticity and damage considerations, together with unsymmetrical hysteresis for tension compression and nonlinear unloading, is presented. ... -
Full-Scale Tests and Numerical Analysis of Low-Rise CLT Structures under Lateral Loading
(American Society of Civil Engineers, 2016)This study examines the mechanical performance of large and small cross-laminated timber (CLT) wall panels with different applications. Two CLT structures were subjected to reversed cyclic lateral loads. One structure ... -
Cross-Laminated Timber for Seismic Regions: Progress and Challenges for Research and Implementation
(American Society of Civil Engineers, 2016) -
Walking Vibration Response of High-Frequency Floors Supporting Sensitive Equipment
(American Society of Civil Engineers, 2015)High-frequency steel and concrete floors are often used to support sensitive equipment to minimize vibration response to walking. Equipment vibration tolerance limits are sometimes expressed as waveform peak acceleration, ... -
Damage Functions for the Vulnerability Assessment of Masonry Buildings Subjected to Tunneling
(American Society of Civil Engineers, 2015)This paper describes a new framework for the assessment of potential damage caused by tunneling-induced settlement to surface masonry buildings. Finite element models in two and three dimensions, validated through comparison ... -
Critical Factors Governing Crack Propagation at the Interface of Fire Insulation and Slender Steel Trusses
(American Society of Civil Engineers, 2015)This article presents a numerical approach in which the implicit finite element method and fracture mechanics concepts are applied to simulate crack propagation at the interface of fire insulation and truss members in steel ... -
Concrete-Filled Steel Tube Columns Encased with Thin Precast Concrete
(American Society of Civil Engineers, 2015)An experimental study was performed to investigate the axial-flexural load-carrying capacity of concrete-filled steel tube columns encased with thin precast concrete (PC). Six eccentrically loaded columns and one concentrically ... -
Wind Load Combinations of Atypical Supertall Buildings
(American Society of Civil Engineers, 2016)Wind loads are generally divided into along-wind, across-wind, and torsional loads, but in reality they occur simultaneously in time and space. Furthermore, because they do not show their maximums at the same instant, they ... -
Improving the Seismic Resilience of Existing Braced-Frame Office Buildings
(American Society of Civil Engineers, 2016)The concept of seismic resilience is defined as the capability of a system to maintain a level of functionality or performance in the aftermath of an earthquake event. In the research reported in this paper, a methodology ... -
Seismic Performance Evaluation of Long-Span Conventional Moment Frames and Buckling-Restrained Knee-Braced Truss Moment Frames
(American Society of Civil Engineers, 2016)Steel moment frame (MF) is one of the most prevalent and well researched steel seismic force resisting systems worldwide. However, efficiency and feasibility of using MF diminishes for large spans. In this paper, a recently ... -
Behavior of Bolted Joints of Cable-Braced Grid Shells
(American Society of Civil Engineers, 2015)The type of joint used is important with respect to the behavior of grid shells. Prototype static experiments and numerical analyses were conducted to study the mechanical behaviors of a new type of joint: bolted joints ... -
Application of Reliability-Based Robustness Assessment of Steel Moment Resisting Frame Structures under Post-Mainshock Cascading Events
(American Society of Civil Engineers, 2014)This paper proposes a reliability-based framework for quantifying structural robustness considering the occurrence of a major earthquake (mainshock) and subsequent cascading hazard events, such as aftershocks that are ...